Bosch Appliances 17e PRE-SET Temperature, Temperature Selector PAD Installation Details

Page 11

Installation/Operating Instructions

Invented for life

PRE-SET TEMPERATURE

The Bosch water heaters are factory pre-set to operate at 55°C (or 50°C on 50 degree model) without temperature selector pads. The pre-set temperatures can be altered to 60°C or 75°C, (or 42°C on 50 degree limited unit) by changing the setting of the CPU or by using the temperature bridges supplied. Refer to page 13 for details.

The appliance can also be fitted with temperature selector pads, available as an accessory item. When fitted, the hot water will be delivered at the temperature displayed on the selector pad.

There are two versions of remote controls available, the 66 series which has bath fill alarm and the 67 series which has bath fill stop.

The two different series must never be connected to the same water heater. The sub controller cannot be used as a sole controller.

There is a Main, Bathroom and Ensuite control available in each series, never connect more than one of each control type to the water heater (except an extra sub controller as the fourth controller.)

Only one of each type can be connected to the appliance.

 

67 series (Bathstop)

66 series (Bathfill)

 

 

 

 

 

Main controller

YPRM67XBN

YPRM66XB

Max temperature 75° C #

YPRM67XB

 

 

 

 

 

 

 

Bathroom controller

YPRS67XBN

YPRS66XB

Max temperature 50°C

YPRS67XB

 

 

 

 

 

 

 

Ensuite controller

YPRP62XB

YPRP62XB

Max temperature 50°C

 

 

 

 

#MAXIMUM TEMPERATURE IS CONTROLLED BY THE MAXIMUM DEFAULT TEMPERATURE SET IN THE WATER HEATER

TEMPERATURE SELECTOR PAD INSTALLATION DETAILS

Main, Bathroom & Sub Control

Select a suitable flat, dry location away from direct sunlight.(Direct sunlight could make it difficult to see display)

Cut an opening in wall through center of where the remote control is to be installed, pull cable from wall cavity through opening. Attach cable to control. Remove cover from remote control, locate control so that the wiring is not caught between the wall and the remote control.

Secure control to wall using the screws provided and refit front cover. Ensure that sufficient cable length is left to remove control if necessary.

TEMPERATURE SELECTOR PAD WIRING DETAILS

1Remove the front cover of the water heater and locate the PCB on the right hand side of the cabinet.

2Locate the two control terminals on the PCB.

(Please be aware that all controller terminals connect back to the same two points on the PCB)

11

Image 11
Contents Installation Manual Number IndexInstallation/Operating Instructions Dimensions YS1770RA series, YS2170RA series GAS Type Technical DataData Plate Appliance Location Position for InstallationYS1770RA series, YS2170RA series Component DetailsYS2670RA series, YS2670RABZ This does not Indicate the Size of the GAS Supply GAS ConnectionCold Water Connection to Water Heater Isolating Gate ValveElectrical Connection HOT Water Connection to Water HeaterTemperature Selector PAD Wiring Details PRE-SET TemperatureTemperature Selector PAD Installation Details Temperature Control Operation USE Bridges Provided Setting the TemperaturePCB Case of Difficulties User Safety InstructionsServicing and Maintenance SafetyWater Quality Table Water QualityWarranty Important Note for Australian Consumers

17e specifications

Bosch Appliances has long been synonymous with quality and innovation in the realm of home appliances. The Bosch 17e series exemplifies this commitment, bringing cutting-edge technology and user-friendly features to the forefront of kitchen design. This series is particularly well-known in the category of kitchen appliances, where efficiency and performance are paramount.

One of the standout features of the Bosch 17e series is its energy efficiency. The appliances are designed with advanced energy-saving technologies, including EcoSense and Energy Star certification. This not only helps reduce the environmental impact but also leads to significant savings on utility bills, making it a smart choice for budget-conscious consumers.

The Bosch 17e ovens are equipped with a variety of cooking settings, including convection cooking, which ensures even heat distribution for perfectly baked goods. The precise temperature control system allows users to achieve the perfect roast and bake, while the built-in timer and self-cleaning options provide added convenience. Additionally, the sleek design and stainless-steel finish make these ovens a stylish addition to any kitchen.

Another remarkable feature of the Bosch 17e series is its quiet operation. Many appliances are designed with noise-reduction technology, making them some of the quietest on the market. This is particularly beneficial for open-concept living spaces, where sounds from cooking and cleaning appliances can disrupt the home environment.

In the realm of dishwashers, the Bosch 17e series shines with its innovative filtration system and adjustable racks, allowing for efficient loading and thorough cleaning. The intelligent sensors assess the load's soil level and adjust the washing cycle accordingly, ensuring optimal performance every time. Water usage is minimized without compromising cleaning power, making it both eco-friendly and effective.

Safety features are also a priority in the Bosch 17e series. Appliances come equipped with child-lock capabilities, auto shut-off features, and tempered glass doors that enhance safety in the kitchen.

In summary, Bosch Appliances 17e series encapsulates quality, efficiency, and modern technology. With features designed for performance, energy savings, and user convenience, these appliances are perfect for any kitchen, whether you're a casual cook or a culinary enthusiast. As Bosch continues to push the boundaries of innovation, the 17e series stands out as a testament to their dedication to creating exceptional home appliances.