Bradford-White Corp S-SW2-60R6DS warranty Solar Saver Series Single Wall Models feature

Solar Saver® Series Single Wall

Energy Saver Water Heater

The Solar Saver® Series Single Wall Models feature:

■Heat Exchanger—Single Wall 11⁄2" O.D. glass coated (Vitraglas®) steel coil. The coil has a heat transfer area of 14.2 sq. ft. and a stored water volume of 2.5 gal. Maximum supply temperature from the solar collector must not exceed 250°F.

■Sensor Wires for Solar Thermistor Connections—Twisted wires are provided under the Upper and Lower covers. These wires have been provided as a means for connecting thermistors to a solar controller (Thermistors and Solar Controller are not provided).

■Optimizer™ Temperature Control System—Integrated mixing device features a thermostatically controlled mixing device that is pre-piped with a flexible connector. This required system is easily installed and ensures a comfortable outlet temperature while providing a steady flow of hot water.

■Double Element Backup—Allows entire storage tank to hold hot water during periods where solar heating is not available.

■Factory Installed Hydrojet® Total Performance System—Cold water inlet sediment reducing device helps prevent sediment build up in tank. Increases first hour delivery of hot water while minimizing temperature build up in tank.

■Vitraglas® Lining—Bradford White water heater tanks are protected from the corrosive effects of hot water by an exclusive ceramic porcelain-like coating. The Bradford White high silica Vitraglas® lining provides a tough interior surface for our hot water tanks.

■Fully Automatic Controls—Fast acting surface-mount thermostats for automatic temperature control. Factory installed sensitive manual reset energy cutoff for safety to prevent overheating.

■Supply and Return Connections—1" NPT female connections are located on the front for both the solar collector supply and return.

■2" Non-CFC Foam Insulation—Covers the sides and top of tank, reducing the amount of heat loss. This results in less energy consumption, improved operation efficiencies and jacket rigidity.

■Potable Water Connections—3⁄4" NPT factory installed true dielectric fittings extend water heater life and eases installation.

■Two Protective Aluminum Anode Rods—Provide added protection against corrosion for long trouble-free service.

■Direct Heat Transfer With Immersed Incoloy Elements—Transfers heat directly and efficiently to the water. Screw-in style.

■Steel Tank—Heavy gauge steel automatically formed, rolled and welded to

assure a continuous seam for glass lining.

■T&P Relief Valve—Included.

■Brass Drain Valve.

Photo is of

S-SW2-60R6DS

6-Year Limited Tank Warranties / 6-Year Limited Warranty on Component Parts.

For more information on warranty, please visit www.bradfordwhite.com

For products installed in USA, Canada and Puerto Rico. Some states do not allow limitations on warranties. See complete copy of the warranty included with the heater.

MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 7,063,133 B2; 5,954,492; 5,761,379; 5,943,984; 5,081,696; 5,988,117; 6,142,216; 5,199,385; 5,574,822; 5,372,185; 5,485,879; 5,277,171; (B1)5,341,770; 5,660,165; 5,596,952; 5,682,666; 4,904,428; 5,023,031; 5,000,893; 4,669,448; 4,829,983; 4,808,356; 5,115,767; 5,092,519; 5,052,346; 4,416,222; 4,628,184; 4,861,968; 4,672,919; Re. 34,534. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 1,272,914; 1,280,043; 1,289,832; 2,045,862; 2,112,515; 2,108,186; 2,107,012; 2,092,105.

Solar Saver®, Vitraglas® and Hydrojet® are registered trademarks of Bradford White® Corporation.

501-B-0408-A