Bradford-White Corp E32-80R, E32-120R, E32-50S manual

Instructions for Conversion of Commercial Electric Models

Wattage/Voltage Conversion --- Element Changes

1.Remove and replace one element at a time.

2.Disconnect the electrical wires from the element terminals.

3.Remove the electrical elements using the Screw-in element removal wrench --- or ---- a 1 ½” deep well socket wrench.

4.Remove the replacement elements from the conversion kit. Check the element markings to ensure correct wattage and voltage before installing.

5.Apply the new gasket (provided in the kit) to the element. Make sure the gasket is aligned correctly and it is not rolled-over.

6.Thread the replacement element into the element fitting until it is seated. Tighten ½ to ¾ turns with the element wrench.

7.Re-connect the wiring to the element terminals. The screw should be snuggly tightened but caution should be exercised not to over tighten. Over tightening could fracture the element ceramic terminal block, and would require replacement.

8.Repeat this procedure (steps 1 thru 7 above) for all other elements needing replacement.

Element Gasket

Element

Element Cover

Figure 1. Example of element removal/installation.

E32-80R, E32-50S, E32-120R specifications

Bradford-White Corporation offers a range of high-efficiency water heaters, including the E32 series models: E32-120R, E32-50S, and E32-80R. These models fall under the Commercial Electric Energy Saver Medium Duty category, designed for various commercial applications that require reliable hot water delivery.

The E32 series is built to meet the demands of commercial environments while ensuring energy efficiency. The E32-120R model features a 120-gallon capacity, making it ideal for establishments with high hot water usage. Similarly, the E32-50S offers a 50-gallon capacity, suitable for smaller commercial operations, while the E32-80R provides an 80-gallon option for medium-sized applications. Each model is designed to deliver hot water on demand, with recovery rates optimized for commercial settings.

A notable feature of the E32 series is its Energy Saver technology. These models are equipped with high-efficiency insulation and advanced heating components that minimize heat loss and reduce energy consumption. This not only leads to lower utility bills but also contributes to a reduced carbon footprint, aligning with contemporary environmental standards.

The integration of an advanced electronic control system in the E32 series allows for precise temperature control and monitoring. Users can easily set and adjust water temperatures to meet specific needs, enhancing comfort and safety. Additionally, these models are designed with user-friendly installation features, allowing for straightforward setup and integration into existing systems.

Durability is a hallmark of the E32 series, with each model constructed using high-quality materials that withstand the rigors of commercial use. The tanks are designed to resist corrosion, ensuring a long lifespan and reliable performance. Furthermore, these heaters come with warranties that reflect Bradford-White’s commitment to quality and customer satisfaction.

Maintenance is easy with the E32 series, featuring replaceable heating elements and accessible anodes. This reduces downtime and increases the longevity of the units. Moreover, they comply with all safety and performance regulations, providing peace of mind for business owners.

In summary, the Bradford-White E32-120R, E32-50S, and E32-80R models are versatile, energy-efficient, and durable solutions for commercial hot water needs. Their combination of advanced technology, user-centric features, and robust construction make them a reliable choice for various commercial applications.