Bradford-White Corp Solar Water Heater manual Important Information

Page 5

Important Information continued-

WARNING

It is the responsibility of the installing contractor to see that all controls are correctly installed and are operating properly when the installation is complete.

DO NOT operate the water heater with jumpered or absent controls or safety devices.

DO NOT tamper with or alter the water heater and/or controls.

DO NOT operate the water heater if any external part or control has been submerged in water. Immediately call a qualified service technician to inspect the appliance and to replace any part of the control system that was under water.

This water heater is suitable for installation on combustible flooring. DO NOT install this water heater on carpeting.

DO NOT operate this water heater without first being certain it is filled with water.

Flammable items, pressurized containers, or any other potential fire hazardous articles must never be placed on or adjacent to the heater. Containers of flammable gases should not be stored or used in the same room with this water heater.

Hydrogen gas can be produced in an operating water heater that has not had water drawn from the tank for a long period of time (generally two weeks or more). Hydrogen gas is extremely flammable. To prevent the possibility of injury under these conditions, it is recommended that a water faucet be opened for several minutes at the kitchen sink before you use any electrical appliance that is connected to the hot water system. If hydrogen is present, there will be unusual sounds such as air escaping through the pipes as hot water begins to flow. Do not smoke or have open flame near the faucet at the time it is open.

CAUTION

The maximum supply temperature from the solar collector must not exceed 250°F (121°C).

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Solar Water Heater with Electric Backup Congratulations Table of Contents If YOU Smell GAS Important Information Mode Model Solar Heat Exchanger Pressure Drop ChartGeneral Information FeaturesTemperature and Pressure Relief Valve Unpacking PRE-INSTALLATIONSolar Water Heating with Electric Backup Fundamentals Instructions for Potable Connections Water ConnectionsInstructions for Solar Connections Connect Solar Piping to Water HeaterFill Solar Collector System Solar Collector Piping in Drainback InstallationTypical TWO-TANK System TWO-TANK System InstallationReplacing the Solar Water Heater in a Two-tank Installation Replacing the Backup Water Heater in a Two-tank Installation Connect Solar Controller and Thermistors Connect Electric Heating Element BackupElectrical Connections Wiring and Placement for the Solar Control Thermistor Water Temperature Adjustment Sequence of Heating Operations -SOLAR and Electric BackupApproximate TIME/TEMPERATURE Relationships in Scalds Operating InstructionsThermostat To inspect or replace an anode MaintenanceMaintenance Problem Cause Solution Troubleshooting GuidePart Name & Description Parts ListPage Section Section

Solar Water Heater specifications

Bradford-White Corp is a well-known name in the water heater industry, and among its innovative offerings is the Solar Water Heater, a solution that combines sustainability with performance. As consumers increasingly seek energy-efficient alternatives, Bradford-White has successfully positioned itself as a leader in solar technology.

One of the key features of the Bradford-White Solar Water Heater is its ability to harness energy from the sun to provide hot water. This system uses solar collectors that capture sunlight and convert it into thermal energy. The solar collectors can be roof-mounted or ground-mounted, making them adaptable to various property designs. They are typically made with durable materials designed to withstand harsh weather conditions, ensuring longevity and consistent performance.

The technology behind Bradford-White's solar water heating system includes a closed-loop system that circulates a heat transfer fluid through the solar collectors. This fluid absorbs heat and is pumped to a storage tank where heat exchangers transfer the energy to the water. This means that even on cloudy days, the system can still deliver energy-efficient hot water.

Another characteristic of Bradford-White solar water heaters is their compatibility with conventional water heating systems. This means that they can be installed as a stand-alone system or as a supplementary component to existing water heating units, offering flexibility depending on household needs and preferences. The integration of solar technology not only reduces energy bills but also lowers greenhouse gas emissions, making it an environmentally friendly choice.

Moreover, these systems are designed with user-friendly controls, enabling homeowners to monitor and optimize their hot water usage effortlessly. The advanced controls often come with features such as programmable settings, allowing users to take full advantage of solar energy during peak sunlight hours.

Bradford-White also prioritizes safety and efficiency in its solar water heaters. The systems are equipped with various safety features, including pressure relief valves and freeze protection measures to prevent damage in colder climates. The energy efficiency ratings are impressive, often exceeding industry standards and providing consumers with peace of mind regarding their investment.

In conclusion, Bradford-White Corp's Solar Water Heater presents an innovative solution for reducing energy costs while promoting sustainability. With advanced solar technology, durable construction, and user-friendly features, this system is an excellent choice for environmentally conscious consumers seeking reliable hot water solutions.
Top Page Image Contents