Bradford-White Corp TGHE-199E-N(X), TGHE-160E-N(X) specification

Bradford-White Corp TGHE-199E-N(X), TGHE-160E-N(X) instruction manual

2.To set the desired temperature on the control, all hot water faucets must be closed. If there are more remote controls installed, press the “Priority” button on the control you want to change the setting on and the “Priority” indicator light will glow.

3.Press the “Up” or “Down” button until the required temperature is displayed on the digital monitor. The default available water temperature range for the main control is 98-120ºF.

4.To operate the water heater, simply turn any hot water tap on. This will automatically light the burner and provide hot water at the preset temperature. If the optional remote controls have been installed, the “IN USE” indicator light will glow on all remote controls.

5.The control(s) can also display diagnostic codes, water flow rate through the unit (in gallons per minute) and the outlet water temperature.

6.Press and hold the “On/Off” button for 2 seconds. While holding the “On/Off” button, press the “Up” button to display a sequence of up to 9 diagnostic codes, if any, stored in memory that has been experienced. Any diagnostic codes will be displayed on the digital monitor in sequence starting with the most recent code. To exit this mode, press the “On/Off” button and “Up” button as before.

7.Press and hold the “Up” button for 2 seconds and without releasing, press the “On/Off” to display the water flow through the water heater with hot water in use (GPM = Display Readout X 0.1).

8.Press and hold the “Down” button for 2 seconds and without releasing, press the “On/Off” to display the outlet water temperature while in use (degrees F).

Temperature Display

In Use Indicator

Priority Button

Priority Indicator

Figure 16. Remote Control and the Description of Functions on All Controls.

NOTICE

The temperature can only be adjusted between 98°F and 110°F when the hot water tap is open and hot water is flowing. This is a safety feature to prevent scalding while hot water is in use.

NOTICE

The default temperature setting that will appear when the water heater is first connected to the electrical supply is 104ºF. In the event of a power interruption, the unit will retain its set temperature for up to 6 hours. If the power is interrupted for more than 6 hours, the unit will revert back to a temperature of 104°F.

TGHE-160E-N(X), TGHE-199E-N(X) specifications

Bradford-White Corporation is renowned for its commitment to quality and innovation in the water heating industry. Among its extensive range of products, the TGHE-199E-N(X) and TGHE-160E-N(X) models stand out for their advanced technology and reliable performance, making them a preferred choice for both residential and commercial applications.

The TGHE-199E-N(X) and TGHE-160E-N(X) are high-efficiency, gas-fired water heaters designed to meet the rising demand for sustainable energy solutions without compromising on performance. Both models feature a powerful, energy-efficient design that significantly reduces energy consumption while providing a consistent supply of hot water.

One of the main features of these models is their use of advanced technology in water heating. The units are equipped with a high-efficiency burner and an optimized heat exchanger that maximizes the transfer of energy, ensuring rapid heating and minimal standby loss. This efficiency is further enhanced by their ability to modulate gas flow, allowing the heater to adjust its operation based on actual demand, rather than running at full capacity at all times.

Safety is a priority in the design of the TGHE-199E-N(X) and TGHE-160E-N(X). Both models are equipped with an electronic ignition system, which eliminates the need for a continuous pilot light, reducing gas consumption and enhancing safety. Furthermore, they include advanced venting options, such as concentric or PVC venting, providing installation flexibility while adhering to stringent building codes.

Moreover, these water heaters are built to last, featuring a durable tank design with a powder-coated, steel construction and a patented Vitraglas® lining. This lining protects against corrosion and extends the life of the tank, ensuring long-term performance and reliability.

Installation and maintenance of the TGHE-199E-N(X) and TGHE-160E-N(X) are straightforward, thanks to their user-friendly design. They come with easily accessible components, making service and repairs less time-consuming and more cost-effective.

In summary, the Bradford-White TGHE-199E-N(X) and TGHE-160E-N(X) gas-fired water heaters exemplify the best in modern water heating technology. Their energy efficiency, safety features, and durable construction make them a top choice for those seeking dependable hot water solutions in residential and commercial settings. With a commitment to innovation and quality, Bradford-White continues to lead the way in delivering superior water heating products.