Philips 201P user manual White Color Temperature, Automatic Power Saving

201P Product Information
• Video dot rate	320 MHz
• Input impedance
- Video	75 ohm
- Sync	2.2 kOhm
• Input signal levels	0.7 Vpp
• Sync input signal	Separate sync
	Composite sync
• Sync polarities	Positive and negative

WHITE COLOR TEMPERATURE

Chromaticity CIE coordinates:
• at 9300 K degrees	x = 0.283 / y = 0.297
• at 6500 K degrees	x = 0.313 / y = 0.329
• at 5500 K degrees	x = 0.332 / y = 0.347

* These information are subject to change without notice.

RETURN TO TOP OF THE PAGE

Automatic Power Saving

If you have VESA's DPMS compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. And if an input from a keyboard, mouse or other input device is detected, the monitor will automatically "wake up". The following table shows the power consumption and signaling of this automatic power saving features:

Power Management Definition

VESA's Mode	Video	H-sync	V-sync	Power Used	Power	LED color
					Saving (%)
ON	Active	Yes	Yes	Typical 124 W	0 %	Green
Stand-by	Blanked	No	Yes	< 7 W	94 %	Yellow
Suspend	Blanked	Yes	No	< 7 W	94 %	Yellow
OFF	Blanked	No	No	< 2.8 W	98 %	Amber

This monitor is ENERGY STAR® compliant. As an ENERGY STAR® Partner, PHILIPS has determined that this product meets the ENERGY STAR® guidelines for energy efficiency.

file:///G/manual/english/201P/product/product.htm (2 of 4) [10/16/1999 6:36:09 AM]