GE 7-5400 user manual Table of Contents, First Things First

Table of Contents
FCC Information
Table of Contents	1
EN
First Things First	2
Tools Required	2
Parts Packed with Your Unit	2
Before Mounting	2
Mounting Procedure	3
Getting Started	6
Automatic Time Set	6
Selecting Time Zone	6
Daylight Saving Time (DST)	6
U.S. Time Zone (Figure 1)	7
Canadian Time Zone (Figure 2)	7
Battery Backup Operation	8
Installing Backup Battery	8
General Controls	9
Main Unit	9
Side Views	9
In Battery Compartment	9
The Remote Control	10
Display	10
Clock & Timer	11

Selecting Radio/TV Band	11
Tuning to a Channel	11
Automatic Channel Search	12
Radio Frequency Memory	12
Memory Recall	12
RBDS (Radio Broadcast Data
System)	12
Program Type Search	12
TV Band	13
Weather Band	13
CD Player	14
Selecting CD Player	14
Loading CD Disc	14
Play and Pause Playback	14
Skip and Search Tracks	14
End Playback	14
Repeat and Random Playback	14
Listening to External mp3 Player
..........................................................	14
Weather Forecast	15
Thermometer	15
Using the Countertop Light	17
Replacing the Bulb	17
Troubleshooting Tips	17

First Things First

Under Cabinet Mounting Instructions

Tools Required

•Drill and 1/4" Drill Bit

•Ruler or Tape Measure

•Nail or Awl

•Scissors

•Screwdriver - Phillips

•Countersink (Optional)

•Masking Tape

•Safety Glasses

Parts Packed with your Unit

Spacers

3 — 1/4"

3 — 1/2"3 — Washers

3 — 1"

USE:

3 — 2 3/4" Phillips head screws

or

3 — 1 5/8" Phillips head screws

Before Mounting

Empty contents of the selected cabinet under which the unit will be mounted and thoroughly clean the underside of the cabinet to remove any grease residue which might be present.

We recommend the unit be mounted at the front edge of the cabinet.

Important: For secure mounting, the screws must go into the radio to a depth of at least 3/8". If the overall length from the bottom of the cabinet shelf to the bottom of the overhang is more than 1 3/4", then a wood shim will be necessary. A shim can be made from a sheet of plywood, using the Template to locate the central lines for drilling the 1/4" mounting holes. The shim can be located between the cabinet shelf bottom and spacers. Make sure the wood is at least as thick as the excess over 1 3/4" If a shim is necessary, longer screws are required. Longer screws (Type #10-32) are available at most local hardware stores.

Cut out the Template on the line indicated. The Template size and screw hole positions are identical to the top of the clock radio.

EN

Setting the Time	11
Setting the Countdown Timer	11
Radio	11
Built-In AFC	11
Antennas	11
Turning On the Radio	11
Turning Off the Radio	11

Care and Maintenance	18
Limited Warranty	19

1 — Mounting

template

2 — Cord hooks

If no overhang, front edge of templet

should be even with front edge of cabinet.

Le bord avant du gabarit doit etre

de niveau avec le bord avant de l'amoire

FRONT AVANT

1 2