94925 Revised Size 2/25/02 4:00 PM Page 14
OPERATING A CD PLAYER
OR TAPE DECK
Use the Play, Forward, Reverse, Record, Stop and Pause buttons for CD players and tape decks. In some cases, the Preset buttons
may work in changing tracks on CD players.
OPERATING THE AM/FM TUNER
1.Press the AUDIO button.
2.Press the TUNER (3) button.
3.Press theAM/FM button to toggle between AM and FM.
4.Use the Preset
OPERATING A HOME THEATER SURROUND SOUND SYSTEM
With GE receivers, a second press of the TV button should turn the receiver on.
1.Turn the TV on.
2.Press the AUDIO button
3.Select the audio input either by using the labeled num- ber buttons or the
FUNCTION button.
4.Press the VOL+ or VOL- buttons to control volume.
NOTE: The Volume buttons may operate both TV and receiver volume at the same time.
If this presents a problem, it may be resolved by dis- abling the TV speakers by going into the TV menu.
CONTROLLING THE SURROUND SOUND
FEATURE
The Surround Sound feature may be turned ON/OFF by pressing the SURR ON•OFF button.
1.Press the SURRMODE button until the desired mode is found.
2.Press DELAY+ or DELAY- to achieve the desired delay effect.
3.Press the DSP ON•OFF button to turn DSP(Digital Sound Processor) ON or OFF.
4.Press the DSP Button until the desired effect is achieved.
5.Press the TEST button to listen to speaker levels.
6.Press FRONT, CENTER, or REAR buttons to select speakers.
7.Press the LEVEL+ or LEVEL- buttons to adjust speaker levels.
13