NorthStar Navigation 8000I Cycle through the panes on a, Select a, Sounder, Cruising, and Fishing

2.12Cycle through the panes on a page

This works only when a page with more than one pane is displayed. Use this to cycle quickly through each pane at full size.

To cycle through the panes on a page:

1.When the page is displayed, select Max from the top of the screen. The active pane expands into a single pane.

2.Select Control. The 8000i makes the next pane active, and displays it as a single pane at full size.

3.Select Control again to make the next pane active, and to display this as a single page at full size. Repeat this to cycle through each of the panes as often as you want.

4.When you want to display the page with all the panes visible on one screen again, select Min.

2.13Select a page

You can view a single function in a page; or two, three, or four functions in a multi- pane page.

To select a page:

1.The favorite five pages are shown as buttons along the bottom of the

screen. Just select a button to have the 8000i immediately display that page. (The factory default favorite pages are Chart, Radar,

Sounder, Cruising, and Fishing.)

2.You can also:

ƒselect Pages to see all the pages that are available, then select a page.

ƒselect Display, select Display again to show all the pages, then select a page.

2.14Adjust the brightness on a 12 inch Display Processor

The brightness on the 8000i can be adjusted to allow for various lighting situations. For night time, the backlight can be turned down to aid night vision.

To adjust the backlight brightness

1.Briefly press the 8000i processor power key to bring up the onscreen display.

2.Select brightness control.

3.Use the rotary knob to adjust the brightness, then either:

ƒ

ƒ

wait until the 8000i exits the onscreen display automatically, or

select the Exit option (using the down arrow) then press the Check key.

Northstar 8000i Quickstart Guide 19