A 0977A
Learning Jumbo Remote
Operating Instructions
Congratulations on purchasing the A 0977A 4 in 1Jumbo remote control. The unit can program a range of devices including TVs, Set top boxes, DVDs, amplifiers, VCRs, PVRs, CDs, etc. For the full range of compatible devices refer to the device code listing enclosed with this product.
The remote control has 4 labelled device keys. These are TV, STB (Set top box), DVD and AUX (Auxiliary). However, any type of device can be programmed into any button.
Instructions
Install batteries in unit (batteries not supplied - requires 2 x AA cells).
The battery compartment is on the rear of the unit. Insert batteries in direction indicated in battery compartment.
Code Programming
The unit can be programmed in the following ways.
A. Inputting the brand code number.
1.Press and hold the device key button you want to program (eg TV, STB etc) for 3 seconds until the LED indicator remains illuminated.
2.Release the device key.
3.Locate the brand code number from the code list supplied separately with this unit. Eg. Akai 0043, 0067, 0070 etc. Now input this code. Once entered the LED will turn off.
4.If you input an incorrect code the LED indicator will flash twice. If this occurs simply go back to step 1.
5.Test the operation of the remote control. If the first code for the designated appliance (eg Akai 0043) does not work, or some functions do not work correctly, enter the next appliance code (eg Akai 0067) until you are successful.
The device key code number can be checked as follows:
1.Press and hold the device key name you want to display (eg TV). 2.The LED indicator will flash once.
3.Whilst holding the device key, press the OK button, then release both buttons.
4.The LED indicator will now flash the number of times that corresponds to each digit of the code, with a 1 second pause between each digit.
5.For example, if the code is 1038, the indicator will flash once, stop for 1 second, flash 10 times for the “0”, pause for a second, flash 3 times for the “3”, then flash 8 times for the “8”.
6.When finished, the remote control will exit automatically.
1