Fujitsu D1521, D1522 technical manual Upgrading main memory, Installing a memory module

Add-on modules / Upgrading

Upgrading main memory

Technical data

Technology: DDR 266 or DDR 333 unbuffered DIMM modules 184-pin; 2.5 V; 64 Bit, no ECC

Total size: 128 Mbytes up to 2 Gbyte DDR-SDRAM

Granularity: 32, 64, 128, 256, 512 or 1024 Mbyte for one socket

A current list of the memory modules recommended for this mainboard is available on the Internet at: www.fujitsu-siemens.de/mainboards.

At least one memory module must be installed. Memory modules with different memory capacities can be combined.

You may only use unbuffered 2,5 V memory modules. Buffered memory modules are not ! supported.

DDR-DIMM memory modules must meet the PC2100 or PC2700 specification.

Installing a memory module

2

2

ÊPush the holders on each side of the memory compartment outwards.

ÊInsert the memory module into the location (1).

ÊAt the same time flip the lateral holders upwards until the memory module snaps in place (2).