Installation

To prevent possible damage to your speakers and other components in your audio system, it is important that ALL components, including the HD 970 and your receiver or preamp and ampli- fiers, are turned off and unplugged from their AC power source when installing any new compo- nent.

Connecting the HD 970 to your audio system is simple. Using standard RCA-to-RCA interconnect cords, connect the left and right Audio Output jacks ™ on the rear panel to the CD input jacks on your receiver, surround processor or preampli- fier.

If your system includes an optional external digital-to-analog converter, or if you are using a receiver or other processor that has the capabili- ty to decode PCM digital input signals, connect the Digital Output jack ¡ to the Coaxial Digital input on the decoder. Make certain to use a coaxial-style interconnect cable, as standard audio cables will not perform as well.

If you have additional external audio sources, you might want to connect their coaxial or opti- cal digital output to the Coaxial or Optical Digital Inputs § on the rear panel of the CD player. This will enable you to use the audiophile high-gradedigital-to-analog convertors and pro- cessing power in the HD 970 rather than the (older and less-powerful) convertors of your external source.

Note that in order to hear the sound from the external source when connected like this, the input of your amplifier or receiver should be the one to which the HD 970 is connected.

Install two AA batteries by turning the remote over so that you are holding the bottom side up. Press lightly on the embossed arrow on the cover and gently slide the cover towards you in the direction of the arrow. Insert the batteries inside the compartment, being careful to follow the + and – polarity indications at the bottom of the compartment. Replace the cover by placing it on the remote and sliding it back towards the top of the remote.

NOTE: When replacing batteries, always replace both at the same time. When the unit will not be used for an extended period of time, it is also a good idea to remove the batteries so that the potential for corrosion or damage is avoided.

If the HD 970 is installed behind a cabinet or other obstruction that may block the path between the front-panel Remote Sensor and the location of the remote, an optional external IR sensor may be used. Connect the sensor to the Remote IR-In Jack £ on the rear panel. This jack may also be connected to the IR- Output jack of another compatible Harman Kardon component or a compatible IR-system- remote product.

You may also use the IR Sensor in the HD 970 to send commands to other compatible remote controlled products. Connect the Remote IR- Out jack ¢ to the input of the other product or system.

Connect the power to a nonswitched AC wall outlet or to the accessory outlet on the rear of another audio device in your system and you are ready to go!

NOTE: When using the accessory outlet on another product to power the HD 970 make cer- tain that it has the compatibility to power a device that draws at least 14 watts of current in addition to being able to handle the require- ments of the other devices that may be plugged into the accessory outlets. If you use a “switched” outlet, it is important to remember that the host product must be turned on in order for the HD 970 to operate.

INSTALLATION 9

HD 970 specifications

The Harman-Kardon HD 970 is a premium CD player that epitomizes audio excellence and sophisticated design. Renowned for its high-quality playback, the HD 970 integrates cutting-edge technology with user-friendly features, making it a preferred choice for audiophiles and music enthusiasts alike.

One of the standout characteristics of the HD 970 is its exceptional sound quality. The unit employs a high-performance digital-to-analog converter (DAC) that ensures precision during playback, capturing the nuances of each note with remarkable clarity. This level of detail in audio reproduction allows listeners to enjoy their favorite music as it was intended by the artists.

In addition to its stellar DAC, the HD 970 features Harman-Kardon’s proprietary technology which includes a precise digital filtering system. This system minimizes artifacts that can detract from sound quality, resulting in a clean and vibrant audio experience. Furthermore, the player supports a wide range of CD formats, including regular CDs, CD-R, and CD-RW, ensuring versatility and compatibility with various types of media.

The unit's design is as impressive as its audio performance. The HD 970 boasts an elegant chassis that not only enhances its aesthetic appeal but also minimizes unwanted vibrations that can affect sound quality. The brushed aluminum front panel adds a touch of sophistication, complementing modern home décor and audio setups.

Control and operation of the HD 970 are intuitive and user-centric. It comes equipped with a clear, easy-to-read display that provides essential information at a glance. The front panel buttons are thoughtfully laid out, allowing for straightforward navigation through tracks and settings.

Additionally, the HD 970 features optical and coaxial digital outputs, offering flexibility for connecting to external digital audio devices and home theater systems. This connectivity enhances the potential for creating a comprehensive audio environment, making it an ideal choice for those looking to enhance their listening experience.

Overall, the Harman-Kardon HD 970 stands out with its blend of advanced audio technology, elegant design, and user-friendly features. Whether you're spinning classic records or burning custom playlists, this CD player delivers audiophile-level performance that will enrich any sound system. It remains a cherished component in the realm of high-fidelity audio equipment.