USING/ADJUSTING the Pump Figure | Invacare CG9701 specification

4.Connect other end of air hoses to the pump.

5.Connect air hoses with fittings to the air chamber openings on the pad (FIGURE 2).

6.Install sheet over pad and bed mattress.

7.Refer to USING/ADJUSTING THE PUMP in this instruction sheet.

Air Chamber Openings

Pad

3.Turn knob on pump to the maximum setting (clock- wise).

NOTE: It will take approximately 15 minutes for the pad to be fully inflated at the maximum p.s.i.

NOTE: Keep hose attached to the pad and the pump, otherwise, deflation will occur.

4.Refer to ADJUSTING THE PUMP in this instruc- tion sheet.

Hose

FIGURE2-INSTALLINGTHECAREGUARDAPP- ATTACHINGHOSETOPAD

USING/ADJUSTING THE PUMP (FIGURE 3)

WARNING

DONOT,underanycircumstances,cutorremove the round grounding prong from any plug used with or for Invacare products. Some devices are equipped with three-prong (grounding) plugs for protectionagainstpossibleshockhazards.Where a two-prong wall receptacle is encountered, it is the personal responsibility and obligation of the customer to contact a qualified electrician and have the two-prong receptacle replaced with a properly grounded three-prong wall recep- tacle in accordance with the National Electrical Code. If you must use an extension cord, use ONLY a three-wire extension cord having the same or higher electrical rating as the device being connected.

Adjusting

NOTE: The pressure of the pump can be adjusted to provide maximum effectiveness and pressure relief for the patient.

NOTE: The pressure can be adjusted with a range from 1 to 8, with 1 being the lowest pressure settting.

NOTE: The pump will cycle every five(5) minutes inflating and deflating the two air chambers.

1.Put patient on the pad.

2.Set the pressure to desired setting.

3.Slide the flat portion of your hand between the pad and the matress of the bed.

NOTE: There should be a cushion of air between the pad and the mattress of the bed. If not, check pump and pad for leaks, tears, kinks, or breaks. If damage is found, DO NOT use. Contact Carrier/Dealer for further instructions.

4.If pressure is unacceptable for patient, repeat STEP 2 until desired pressure is reached.

Pump

Power

Switch

Knob

Using

1.Plug power cord into outlet.

2.Turn power switch to the ON position.

NOTE: The green light will be illuminated when the pump is in the ON position.

FIGURE 3-USING/ADJUSTING THEPUMP

CARE AND MAINTENANCE

1.The pad can be cleaned by wiping it with a germicidal disinfectant solution.

CG9701 specifications

The Invacare CG9701 is an advanced and versatile power wheelchair designed to enhance mobility and independence for users with varying physical capabilities. This model combines innovative technology with comfort, ensuring an outstanding experience for its users. The CG9701 is tailored for both indoor and outdoor use, making it an ideal choice for those who seek a reliable mobility solution.

One of the standout features of the Invacare CG9701 is its powerful and efficient drive system, which includes robust motors that provide excellent performance on different terrains. Users can navigate various surfaces, from smooth indoor floors to rough outdoor paths, with ease. The chair's remarkable speed control allows for smooth acceleration and deceleration, ensuring a safe driving experience.

The CG9701 is equipped with an ergonomic seating system, which includes adjustable armrests and footrests. This adaptability caters to individual preferences, promoting comfort during prolonged use. The seat itself can be adjusted in height and depth, accommodating users of different sizes and providing the necessary support for hours of sitting.

The Invacare CG9701 also incorporates advanced technology in its control systems. The joystick controller is intuitive, allowing users to operate the wheelchair with minimal effort. The controller features programmable settings, enabling users to customize speed and sensitivity based on their personal needs and capabilities. Furthermore, the chair includes safety features such as anti-tip wheels and a secure braking system, ensuring stability and peace of mind during operation.

Durability is a key characteristic of the CG9701. It features a rugged frame that withstands daily wear and tear, making it suitable for regular use without compromising aesthetics or functionality. The high-quality materials used in its construction guarantee longevity, even in demanding environments.

The wheelchair's battery system is another highlight, offering an extended range that allows users to travel further without the worry of running out of power. The charging system is designed for convenience, and users can easily recharge the batteries at home or in accessible public spaces.

Overall, the Invacare CG9701 stands out in the mobility market due to its combination of comfort, customization, and cutting-edge technology. It provides users with the freedom to navigate their environments confidently, making it a valuable investment for those seeking enhanced mobility and independence.