INSPECTION, Maintenance Cleaning | Harbor Freight Tools 9576, 94639

this process for the discharge hose having a threaded male connector.

3.If you are connecting a suction hose having a threaded female connector, wrap about 4” of pipe seal tape (not included) around the threads of the male connector of the Utility Pump. Then, firmly screw the female connector of the suction hose onto the threaded male connector of the Utility Pump. Repeat this process for the discharge hose having a threaded female connector.

Note: Depending on the make/model of boat on which the Utility Pump will be used, there are many variations as to connecting the Utility Pump to the boat’s 12 Volt DC electrical system. Therefore, it is recommended that only a qualified technician perform this procedure.

Note: It is highly recommended that a circuit protection device and control switch be used when permanently installing this pump. Refer to the section, “Specific Product Warnings and Precautions” in this manual for further instructions.

INSPECTION, MAINTENANCE,

AND CLEANING

TO PREVENT INJURY AND FIRE FROM

ACCIDENTAL OPERATION OR SPARKING:

Turn the Boat’s Ignition Switch to its “OFF” position and disconnect the Power Cords (1) from the boat’s 12 Volt DC electrical system before performing any inspection, maintenance, or cleaning.

1.BEFORE EACH USE, inspect the general condition of the Utility Pump. Check for loose screws, misalignment

or binding of moving parts, cracked or broken parts, damaged electrical wiring, loose or leaking suction and discharge hoses, and any other condition that may affect the safe and efficient operation of the Utility Pump. If abnormal noise or vibration occurs, have the problem corrected before further use. Do not use damaged equipment.

2.WHEN NECESSARY: With a clean, dry cloth, or vacuum, remove all dirt and debris from the Utility Pump.

PLEASE READ THE

FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

Page 6	For technical questions, please call 1-800-444-3353.	SKU 9576,
		94639

94639, 9576 specifications

Harbor Freight Tools has established itself as a go-to destination for high-quality yet affordable tools and equipment. Among its extensive product offerings, two standout items are the 9576 and 94639 models, both known for their reliability and performance in various applications.

The Harbor Freight Tools 9576 is recognized primarily as a heavy-duty tool storage solution. This tool chest is built with a solid steel construction, ensuring durability and a long lifespan even when subjected to rigorous use. One of its standout features is the multiple drawers that provide ample storage space for tools of various sizes. Each drawer is equipped with smooth gliding ball-bearing slides, allowing for easy access to stored items. The upper compartment typically includes a removable tray for smaller parts, which adds to its organizational capability.

In terms of security, the 9576 comes with a lock and key system, ensuring that valuable tools and equipment are safely stored while not in use. Its sleek design and powder-coated finish offer an aesthetically pleasing addition to any garage or workshop. The rolling casters allow for easy mobility, ensuring that it can be moved around freely.

On the other hand, the Harbor Freight Tools 94639 is a high-performance air compressor designed for versatility and efficiency. This unit is powered by a robust motor, providing the necessary air pressure for a range of tasks, from inflating tires to operating pneumatic tools. The 94639 features an oil-free pump, which minimizes maintenance while maintaining optimal performance.

In terms of portability, the 94639 is designed with a lightweight construction and includes a convenient carry handle, making it ideal for home use or job site applications. Another significant characteristic is its quiet operation, allowing for use in residential areas without causing disturbances. The built-in pressure gauge helps users monitor air pressure levels, ensuring that they can complete tasks with precision.

Both models showcase Harbor Freight Tools’ commitment to innovation and quality. The 9576 excels in tool storage and accessibility, making it a perfect choice for tradespeople and DIY enthusiasts alike, while the 94639’s reliability and efficiency make it an essential tool for air-powered applications. With their outstanding features and practicality, both the 9576 and 94639 exemplify why Harbor Freight Tools is a trusted name in the tool industry.