Giant P46HT installation instructions Triplex Ceramic Plunger Pump, Pulley Information

Page 6

Model P46HT

TRIPLEX CERAMIC PLUNGER PUMP

Volume

Up to 127 GPH1

Discharge Pressure

900 PSI

Inlet Pressure

6 PSI minimum @ 194oF

....................................................................................................................

15 PSI min. @ 194oF to 220o F

Plunger Diameter

18mm

Crankcase Capacity

8 fl. oz.

Temperature

Up to 220oF

Inlet Ports

(2) 1/2" BSP

Discharge Ports

(2) 3/8" BSP

Pulley Mounting

Either Side

Shaft Rotation

Top of pulley towards Head

Weight

14 lbs.

Consult the factory for special requirements that must be met if the pump is to operate beyond one or more of the limits specified above.

PULLEY INFORMATION

Pulley selection and pump speed are based on a 1725 RPM motor and "B" section belts. When selecting desired GPM, allow for a ±5% tolerance on pumps output due to variations in pulleys, belts and motors among manufacturers.

1.Select GPM required, then select appropriate motor and pump pulley from the same line.

2.The desired pressure is achieved by selecting the correct nozzle size that corresponds with the pump GPM.

HORSEPOWER INFORMATION Horsepower ratings shown are the power require- ments for the pump. Gas engine power outputs must be approximately twice the pump power requirements shown above.

We recommend that a 1.1 service factor be specified when selecting an electric motor as the power source. To compute specific pump horsepower requirements, use the following formula:

(GPH X PSI) / 87,375 = HP

P46HT PULLEY SELECTION AND HORSEPOWER REQUIREMENTS

 

 

PUMP

MOTOR

 

 

 

GPH1

RPM

PULLY

PULLY

500 PSI

700 PSI

900 PSI

71

500

7.75"

2.0"

0.41

0.57

0.73

106

750

7.75"

3.25"

0.61

0.84

1.09

127

900

7.75"

4.0"

0.72

1.02

1.31

 

 

 

 

 

 

 

1GPH=Gallons per hour

6

Image 6
Contents Updated 3/98 Model P46HTRepair Instructions P46HT Pumpsystemmalfunction Malfunction Cause RemedyP46HT Torque Specifications P46HT Repair KitsPosition Item# Description P46HT Parts List Part Description QTYTriplex Ceramic Plunger Pump Pulley InformationInstallation Instructions Important Operating ConditionsGiant Industries Limited Warranty P46HT Dimensions Inches

P46HT specifications

The Giant P46HT is a remarkable addition to the realm of high-performance mountain bikes, designed specifically to cater to the demands of avid riders and outdoor enthusiasts. This cutting-edge bike is built for tackling rugged terrains while ensuring the utmost comfort and control, making it an ideal choice for both casual riders and seasoned professionals.

At the heart of the Giant P46HT’s functionality is its advanced frame geometry. The lightweight aluminum frame provides an optimal blend of strength and responsiveness, allowing riders to navigate challenging trails with ease. The geometry is strategically designed to enhance stability during descents and improve agility while cornering, giving athletes the confidence to push their limits.

One of the standout features of the P46HT is its suspension technology. Equipped with a front suspension fork that boasts a significant travel distance, it effectively absorbs shocks from uneven surfaces, ensuring a smoother ride. This capability ultimately contributes to better traction and control, particularly on technical trails. The rear of the bike features a robust design that allows for efficient power transfer, enhancing overall ride efficiency.

The P46HT also incorporates cutting-edge tire technology. Its wide tires provide exceptional grip and traction, enabling riders to maintain control on loose gravel, mud, and rocky terrains. These tires, combined with the bike's well-engineered clearance, reduce the risk of mud accumulation, enhancing performance in wet conditions.

The drivetrain on the Giant P46HT is engineered for seamless shifting, utilizing a high-quality groupset that ensures smooth transitions between gears. This feature allows for quick adjustments in response to varying terrain, making it easier to maintain optimal cadence and speed.

Another highlight of the P46HT is its braking system. Featuring hydraulic disc brakes, this bike guarantees powerful stopping performance in all weather conditions. Riders can rely on consistent and precise braking, which is crucial for navigating steep descents or tricky corners.

Further enhancing the riding experience is the bike's ergonomic design. Components such as the saddle and handlebars are designed to provide maximum comfort, reducing fatigue during long rides.

In summary, the Giant P46HT stands out due to its combination of innovative technologies, robust construction, and rider-focused design features. Whether conquering steep hills or cruising through scenic trails, the P46HT is engineered to deliver an unparalleled mountain biking experience.