Graco 1050P manual 空气阀组件, 标准或脉冲计数型号 (没有防空打保护电磁阀):, 空气阀杯和阀板的安装

Page 12

修理

210

2061

217

219

带有防空打保护

218

DataTrak

 

1涂抹锂基润滑脂。

2U-Cup唇缘必须朝向活塞。

4. 空气阀组件

210

2061

207

201

空气

入口

1 204 1 203

211 1 212

205 209

2081 2

2021

2081 2

2072061 210

ti14026a

4. 润滑活塞 (202)

两端并将其安装在阀体 (201) 上,

7. 润滑并安装制动组件 (203) 到活塞内。安装弹簧

使平边朝向阀杯

(212)。当把活塞放入阀体时,应小

(211)。润滑需要接触阀板 (205) 的空气阀杯 (212)

心不要刮破 U-Cup (208)

边沿。安装空气阀杯 (212)。将小圆磁铁与空气入口

 

 

对准。

5.标准或脉冲计数型号 (没有防空打保护电磁阀):

润滑新 O 形圈 (206) 并安装到端盖 (207) 上。将 8. 安装阀板 (205)。将阀板上的小孔与空气入口对准。

端盖安装在外套中。

拧紧螺丝 (209) 以将其固定。

DataTrak 型号 (配有防空打保护电磁阀):确定空

 

气阀的方向,以使空气入口朝下。润滑新 O 形圈

 

(206) 并将其装在右边端盖 (207) 上。润滑新 O

 

(206)、电磁阀释放按钮 (218) O 形圈 (219)

212

并将它们装在左边端盖 (217) 上。将端盖安装到外

205

套上。

 

6. 分别安装卡环 (210) 到两端以固定端盖到位。

 

磁铁

ti14097a

5. 空气阀杯和阀板的安装

12

3A0557L

Image 12
Contents 不锈钢 俄罗斯专利号中心法兰 端法兰相关手册 订购新泵: 为现有泵订购零配件:请勿只使用此手册配置和订购泵。与您的 Graco 经 检查铭牌 ID,查看泵的 20 位配置号。泵表格 火灾和爆炸危险 在通风良好的地方清洗塑料零配件。 不要用干布清洗。 请勿在设备工作区操作静电喷枪。设备误用危险 高压设备危险热膨胀危险 高压铝质零配件危险流体或烟雾中毒危险 烧伤危险设备表面及加热的流体在工作期间会变得非常热。为了避免严重烧伤: 请勿接触热的流体或设备。 个人防护装备故障排除 流体中有气泡。 吸料管路已松动。 拧紧。 隔膜 (和备件)已破裂。 松开歧管、损坏的阀座或歧管 O 形先导阀已损坏。 轴座或轴承已磨损。泄压步骤 修理或更换空气阀。更换整个空气阀 更换密封件或重建空气阀 重装空气阀拆卸空气阀 空气阀组件 标准或脉冲计数型号 (没有防空打保护电磁阀):空气阀杯和阀板的安装 止回阀的修理 形圈配件包和紧固件配件包。执行泄压步骤 (第 10 页)。断开所有的软管。 将泵从安装架上卸下。 球止回阀组件隔膜和中心部分 超模压隔膜所有其他隔膜 :不要卸下没有损坏的轴承。(金属泵) (塑料泵)安装隔膜和中心部分 超模压隔膜: 所有其他隔膜 金属泵:所有其他隔膜 塑料泵: 扭紧说明 流体盖工具流体盖和歧管紧固件: 空气阀紧固件:零配件 有些型号没有使用。零配件 / 配件包快速参考 将此表用作零配件 / 配件包的快速参考表。请参见表中说明的页面以了解配件包的完整描述。中心部分 参考 描述示例配置号 铝质中心部分 A01x、AC1x、AU1x 和 AU3x中心部分再造配件包 先导阀组件配件包中心轴轴承配件包 接地螺丝 (参考 19)空气阀和数据监视 空气阀密封配件包 †24B769 24C983空气阀修理配件包 空气阀备件配件包空气阀端盖配件包 () 脉冲计数配件包流体盖和歧管 哈氏合金和 不锈钢 出口歧管配件包铝质出口歧管配件包 铝质入口 歧管配件包歧管紧固件 (参考 9) 塑料入口歧管配件流体盖紧固件 (参考 7) 歧管紧固件配件包 配件包描述泵座和止回球 阀座配件包配件包包括: 个阀座,材料列于表 个球,表 11 中说明的材料 包括 8 个 O 形圈和 PTFE,除非表中说明 无 的选择器工具或与您的经销商联络。标准隔膜配件包 超模压隔膜配件包隔膜 (续) 两件式隔膜配件包空气和流体板配件包 隔膜轴螺栓 (金属泵)歧管 O 形圈 技术数据 流体温度范围 外部非流体零配件(如果用于中心部分) Graco Standard Husky Pump Warranty
Related manuals
Manual 24 pages 289 b

1050P specifications

The Graco 1050P is a paint sprayer designed to meet the needs of both professional contractors and DIY enthusiasts. It boasts a range of features and technologies that enhance its performance, efficiency, and ease of use, making it a reliable choice for various painting projects.

One of the standout features of the Graco 1050P is its powerful motor. With a maximum pressure of up to 2800 PSI, this unit is capable of handling thick materials, ensuring a smooth and even application. The robust motor allows users to spray a variety of coatings, including stains, sealers, and even heavy-duty paints, making it versatile for different jobs.

The Graco 1050P incorporates industry-leading Airless Technology, allowing for a high-quality finish without the need for thinning paint. This technology minimizes overspray and ensures that the paint is evenly distributed on the surface, reducing the time needed for touch-ups. The sprayer is equipped with a professional-grade spray gun that enhances control and accuracy, enabling users to achieve precise lines and coverage.

Another important characteristic of this sprayer is its lightweight and portable design. Weighing in at just under 50 pounds, the Graco 1050P is easy to maneuver, making it suitable for both large and small projects. The integrated handle and durable wheels add to its mobility, allowing users to transport it easily around job sites.

The Graco 1050P also features a convenient reversible tip design. This innovation allows users to quickly switch between different spray patterns and sizes, maximizing versatility based on project requirements. If a clog occurs, reversing the tip can clear it instantly, minimizing downtime and maintaining productivity.

For added convenience, the unit is equipped with a durable paint hose that extends up to 75 feet, providing ample reach for those hard-to-reach areas. Its filter system helps keep dirt and debris out of the paint, ensuring a clean application every time.

Safety is a priority with the Graco 1050P, which comes with an easy-to-use pressure relief valve. This feature prevents accidental discharge of paint and enhances user protection while operating the sprayer.

In summary, the Graco 1050P is a feature-packed paint sprayer built for both performance and convenience. Its powerful motor, airless technology, portability, and versatile design make it a top choice for any painting professional or DIYer looking to achieve flawless results.