Remote Control Functions

0Power On: Turns on the player when it is in Standby mode (Harman Kardon logo appears on screen).

1Open/Close: Press to open or close the disc tray.

2Audio Select: Press to access various audio lan- guages on a DVD (if the DVD contains multiple audio streams). This button may also allow you to access other audio formats on DVD discs, such as linear PCM or Dolby Digital 5.1 tracks (or other formats), if they’ve been recorded on the disc.

3Clear: Press this button to remove on-screen menus or banners from the display screen. Press this button to clear the current play order displayed next to a track while programming a playlist. In Stop mode and with all menus and banners removed from the display, press and hold this button for five seconds to reset all settings to their factory defaults.

4Playlist: Press this button to access the Playlist on-screen menu, which enables you to change the order in which tracks are played on a CD or DVD- Audio disc. (See page 36 for more information on creating and playing playlists.)

5Repeat: Each press of this button changes the playback mode to repeat a chapter or track or the entire disc. A repeat icon will appear in the upper right corner of the screen indicating the current repeat mode. If the Player Information Screen is active, the changes will be displayed on screen.

6A-B Repeat: Press this button to enter the start- ing point of a section on a disc you wish to repeat. The second press enters the end of the selection to be repeated. Once the “A” (start) and “B” (end) points have been entered the player will repeat the selection until the Play Button N3 is pressed or the disc is stopped. If the Player Information Screen is active, the changes will be displayed on screen.

7Random: Each press of this button starts or stops playback in random order. The Random function is only available when playing CDs, but not when a Playlist is active (the Player Information screen indi- cates Programmed Order on the Playlist line).

8Info: Press once to access the Player Information menu for information on the current disc and the play- back mode settings. Press again to remove informa- tion from screen. See page 28 for more information on the Player Information menu.

9Setup: Press this button to use the DVD 37’s on-screen menu system to adjust the player’s configu- ration settings. Note that the Info Button 8must be pressed to access the DVD 37’s Player Information menu to obtain detailed disc information, and to con- figure the playback mode of the disc.

APrevious Step/Skip: Press this button once to skip back to the beginning of the current chapter on a DVD or track on a CD or DVD-Audio disc. Press it again to continue to skip back through the previous

chapters or tracks. After first pressing the Pause Button L, press this button to step backwards through a DVD or VCD as a series of still-image frames.

BSearch/Slow Reverse: This button initiates fast or slow play in the reverse mode. For fast reverse play, each press of the button when playing DVD or VCD discs changes the speed as indicated by the number appearing in the upper right corner of the screen. For slow reverse play, first press the Pause Button L and each subsequent press of this button will change the slow play speed as indicated by the number appearing in the upper right corner of the screen.

CAngle: Press this button to change the camera angle on discs programmed for multiple-angle views. When a JPEG is being displayed, pressing the Angle Button Crepeatedly causes the on-screen image to rotate clockwise by 90 degrees each press. The current orientation in degrees will be displayed in the upper right corner of the screen.

DMNKLNavigation Buttons: Use to move the cursor in the on-screen menu system.

ELight: Press to illuminate the buttons on the remote controller.

FVideo Off: Press this button to turn off the video output for improved audio performance when playing discs. Press it again to view the on-screen menus. It is highly recommended that you use this function to prevent “burn-in” of your plasma video display.

GAudio Mode Selector: This button adjusts the Bass Management setting, which is also found in the AUDIO SETUP menu (see page 22). Stop playback of the current disc in order to use this selec- tor. There are three available settings: Bypass (the default), On and Stereo. The first press displays the current setting, and each additional press cycles through the three settings.

In Bypass mode, the analog audio information is passed through the Analog Audio Outputs 89 as is, without any bass management adjustments being applied. This mode is used with receivers and proces- sors that are capable of applying bass management settings (speaker size, output levels and delay times) to their 6-channel analog inputs.

The On setting is used with receivers and processors that pass the audio signals from their 6-channel analog inputs directly to the outputs without applying any bass management settings. With bass management on, it is recommended that you use the AUDIO ADJUSTMENTS submenu to set the DVD 37’s bass management settings. See page 22.

The Stereo mode is used when a 2-channel downmix of a multichannel audio signal is desired. For example, if you are playing a DVD-Audio disc, in which case the multichannel presentation is only available through the Analog Audio Outputs 89, and you would like to have this signal available for a multiroom system, select the Stereo mode.

NOTE: The 2-channel downmix (Stereo mode) and the 5.1-channel presentation of multichannel audio discs (Bypass or Bass Management On modes) are not available simultaneously. With bass management on, the same front left and right channel information will be available at both of the left and right Analog Audio Outputs 89. No surround information will be present in the signal output at the 2-channel Analog Audio Outputs 8. In Stereo mode only, the downmixed 2-channel signal will be available at both Analog Audio Outputs 89. Use the Audio Mode Selector Gto toggle through the three available settings.

HHD Mode Selector: When the DVD 37 is con- nected to a video display using the HDMI Output 2, the display sends information to the DVD 37 indicating the highest video resolution it is capable of handling, and the DVD 37 automatically sets the video output to match it. Pressing this button allows you to manually change the output resolution, with your selection indicated by the Video Output Indicators K.

The DVD 37 will not allow you to select a resolution beyond the capabilities of your display, and if you try to do so, an on-screen error message will appear to alert you to the selection of an incompatible video for- mat. Changes made with this button remain active until the DVD 37 or the display is turned off. When either is turned off, and then on again, the DVD 37 will revert to the default setting transmitted by the display.

IDimmer: Press to change the brightness of the front panel display or to turn the display off completely in the following order: FULL BRIGHTNESS ➜ HALF BRIGHTNESS ➜ OFF ➜ FULL BRIGHTNESS

JProgressive Scan/Interlaced Button: Each press of this button selects between the progressive scan and interlaced modes for the Component Video Outputs ∞. This button has no effect while the Setup menu system is active, indicated by –SETUP-appearing in the Information Display B. Press the Setup Button 9to clear the Setup menu, and then press this button to toggle between the progressive scan and interlaced component video settings.

KEnter: Press this button to enter a setting in the DVD 37 menu system or to confirm a menu selection choice in a disc’s on-screen menu.

LPause: Press this button to pause the disc and freeze the picture during DVD or VCD playback, or to pause the playback of a CD or DVD-Audio disc. To play a DVD or VCD in the slow-forward or -reverse mode, first press this button and then press either the Search/Slow Forward Oor Reverse Button B.

MZoom: Press this button to zoom in on the image from a DVD, VCD or JPEG image. The image may be expanded by a factor of x2, x3, x4 or x5. Once the on-screen indication of the zoom ratio disap- pears from the screen you may use the Navigation Buttons Dto explore the picture.

12 REMOTE CONTROL FUNCTIONS