Gardena 7940, 7941 Assembly, Attach the filter trough, Attach the motive water hose Only for set

4. Assembly

Attach the filter trough:

4

33

c 1

c

5

1

6	8
	7

9

1.Pull the side clips a slightly away from the filter trough 1 and remove the splashguard 2.

2.Insert the filter sieves 3 into the filter trough 1 with the ridges facing b downwards.

3.Install the collecting basket 4 in the filter trough 1.

4.Push the red adjuster c in the direc- tion of the arrow and push the feet 5

(with the side notches facing outwards) into the filter trough 1 from below.

5.Push the sealing ring 6 onto the nozzle housing 7.

6.Push the nozzle housing 7 into the filter trough 1 from the front.

7.Screw the threaded ring 8 onto the nozzle housing 7 from

the inside.

8.Screw the small threaded connector 9 onto the nozzle housing 7.

9.Push the splashguard 2 onto the feet 5 from above until the clips a lock into place.

a	2
	GB
1
1

b	1
2

5

2

a

9

Attach the motive water hose

(only for set 7940):

0 A	B A	B 0
1	2	3

1.Push the union nut 0 over the motive water hose A.

2.Push the motive water hose A all the way into the universal adaptor B.

3.Screw the union nut 0 onto the universal adaptor B and tighten by hand.

4.Repeat for the other end of the hose.

13