Harbor Freight Tools 93662 manual To Fill The Fuel Tank, See Figure C

Page 8

To Fill The Fuel Tank:

FUEL TANK CAP

(83A)

FUEL TANK

(84A)

FIGURE B

1.Prior to first using the Water Pump, the Fuel Tank (84A) MUST be filled with high octane unleaded gasoline. (See Figure B.)

2.To do so, remove the Fuel Tank Cap (83A) and fill the Fuel Tank with unleaded gasoline. Then, replace the Fuel Tank Cap. Thereafter, check the Fuel Tank (84A) for the amount of unleaded gasoline. When necessary, refill the Fuel Tank.

(See Figure B.)

To Connect An Intake Hose & Discharge Hose To The Water Pump:

1.The Intake Filter (21) that is provided with the Water Pump should be attached to the end of the Intake Hose (not included) with a Hose Clamp that is provided with the Intake Union Set (9). (See Figure C, next page.)

2.To connect the other end of the Intake Hose to the Water Pump, slide the Coupling Gasket onto the Hose Coupling of the Intake Union Set (9). Slide the Hose Clamp and Hose Joint of the Intake Union Set (9) onto the end of the Intake Hose. Insert the Intake Hose onto the Hose Coupling, and firmly tighten the Hose Clamp to secure the Intake Hose onto the Hose Coupling. Then, screw the Hose Joint onto the Intake Flange (14) of the Water Pump. (See Figure C.)

3.To connect a 2” diameter Discharge Hose (not included) to the Water Pump, slide the Coupling Gasket onto the Hose Coupling of the Discharge Union Set (9). Slide the Hose Clamp and Hose Joint of the Discharge Union Set (9) onto the end of the

Discharge Hose. Insert the Discharge Hose onto the Hose Coupling, and firmly tighten the Hose Clamp to secure the Discharge Hose onto the Hose Coupling. Then, screw the Hose Joint onto the Discharge Flange (10) of the Water Pump.

(See Figure C.)

SKU 93662

For technical questions, please call 1-800-444-3353.

Page 8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents For technical questions or replacement parts, please call Distributed exclusively by Harbor Freight ToolsSpecifications General Safety Rules and PrecautionsSave this Manual Work AreaPersonal Safety Tool USE and CareFire and Explosion Precautions Specific Safety Rules and PrecautionsService Noise Precaution Mechanical PrecautionsChemical Precautions MISC. Precautions UnpackingAssembly Instructions To Add Engine OilTo Fill The Fuel Tank See Figure CFigure C Operating Instructions To Prime The Water PumpTo Start And Stop The Engine SKU For technical questions, please callINSPECTION, MAINTENANCE, and Cleaning Do not use damaged equipmentTroubleshooting Please Read the Following CarefullyParts List & Assembly Diagram Water Pump Part Description QtyParts List Engine Engine MaintenanceAssembly Diagram Engine Emission Control System Warranty Pump Performance Flow Chart

93662 specifications

Harbor Freight Tools 93662 is a well-regarded product in the tool industry, celebrated for its reliability and efficiency. This tool is a 12 Volt cordless impact wrench that is designed to help both professionals and DIY enthusiasts tackle a wide range of projects with ease. It stands out for its impressive features, innovative technologies, and user-friendly characteristics.

One of the main features of the 93662 is its powerful motor, which delivers up to 280 foot-pounds of torque. This level of power is sufficient for handling stubborn lug nuts, bolts, and other fasteners. The ΒΌ-inch anvil offers a quick-change socket feature, allowing users to switch out sockets in seconds without hassle. This is particularly beneficial on job sites where time is of the essence.

The design of the Harbor Freight 93662 is sleek and compact, allowing for easy maneuverability in tight spaces. Weighing only a few pounds, this impact wrench is lightweight, which reduces user fatigue during extended usage. The ergonomic grip ensures that users maintain comfort and control, promoting ease of use over long periods.

In terms of technology, the 93662 utilizes a lithium-ion battery, which is known for its longevity and quick charging capabilities. This feature guarantees that users can spend more time working and less time waiting for their tool to charge. The cordless design removes the constraints of a power cord, enabling freedom of movement without the risk of tripping over wires.

Another significant characteristic of the Harbor Freight 93662 is its built-in LED work light. This feature illuminates dark workspaces, ensuring visibility when it matters most. Whether you are working in a garage, under a vehicle, or in a poorly lit area, the integrated light adds an additional layer of convenience.

Moreover, the impact wrench comes with several safety features, including overload protection, which helps prevent damage to the tool, ensuring it remains operational for years to come. The rugged construction is designed to withstand the rigors of daily use, making it a durable choice for various applications.

In conclusion, the Harbor Freight Tools 93662 is a robust 12 Volt cordless impact wrench that combines power, efficiency, and user-friendly features. With its torque capacity, lightweight design, advanced battery technology, and added safety features, it is a practical choice for anyone looking to enhance their toolkit. This tool embodies the reliability and performance that Harbor Freight is known for, making it a valuable addition for both professional tradespeople and hobbyists alike.
Top Page Image Contents