Harbor Freight Tools 69297 owner manual Operation, Storage, Fitting, Pump, Foot Valve

Page 5

Operation

To prevent electric shock and death:

Make sure that the Motor Cover is properly closed and sealed before priming or operation.

Note:

A foot valve on the inlet connection is critical to help prevent the pump from losing prime.

Note: Check that the water source and piping are clear of sand, dirt and debris.

2. Close the valve on the outlet side of the Y-fitting, and open the valve on the priming side of the Y-fitting.

Bucket

 

full of

ose

clean

H

 

water

riming

 

P

Y-fitting

(with one valve for each outlet)

Inlet Pipe

Outlet Pipe

Pump

3.Remove the Priming Plug and wait until water starts coming out of the Priming Plug. Replace the Priming Plug and tighten securely.

4.To start the pump:

a.Open the valve on the outlet side of the Y-fitting.

b.Make sure your hands are dry.

c.Plug in the pump.

d.Close the valve on the priming side of the Y-fitting.

CAUTION: Do not run the Pump Dry! Turn off the Pump immediately if water stops coming out the Outlet.

Foot

Valve

1.Connect a bucket full of at least 3 gallons of water to one side of the Y-fitting using a hose, as shown above. (If available, a continuous water supply, such as a spigot, may be used instead.) The bucket must be positioned higher than the pump’s outlet.

5.If you operate the Pump and no water comes out, shut the Pump off IMMEDIATELY. Check the pipes for air-tightness. Check also that the bottom of the Inlet pipe is underneath the surface of the water and a foot valve is properly installed.

6.After the pump is running properly, the priming hose and bucket can be disconnected.

Storage

1.If you will not be using the Pump for an extended period of time, drain the Pump Housing. First disconnect both the suction and outlet lines, then tip the pump so that all the water is drained from the pump cavity.

2.If the Pump sits idle for a period of 5 days or more, it should be unplugged and rotated with a screwdriver through the middle hole of the fan cover through several revolutions to prevent it from taking a permanent set.

3.If you use the Pump only occasionally, when you are done pumping, replace the Inlet and Outlet Covers to protect the unit.

SKU 69297

For technical questions, please call 1-800-444-3353.

Page 5

Image 5
Contents Email our technical support at tech@harborfreight.com Clear Water PumpFor technical questions, please call SKU SKU For technical questions, please call SymbologyGrounding Instructions Pipe Connection SpecificationsSet up Storage OperationFitting PumpProblem Possible Causes Likely Solutions TroubleshootingRecord Product’s Serial Number Here Parts list and DiagramDescription Qty Mission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 800 Limited 90 Day Warranty

69297 specifications

Harbor Freight Tools 69297 is a versatile and reliable floor jack that caters to both professionals and DIY enthusiasts. This heavy-duty hydraulic jack is designed to lift vehicles with ease and precision, showcasing impressive features and technologies that enhance its performance and usability.

One of the standout characteristics of the Harbor Freight Tools 69297 is its robust lifting capacity. With a maximum lifting weight of 3 tons, this floor jack is well-suited for lifting a range of vehicles, including cars, trucks, and SUVs. This capacity ensures that users can tackle a variety of automotive tasks, from tire changes to brake inspections, without worrying about overloading the jack.

The construction of the 69297 is another key feature that sets it apart. It is built with a sturdy steel frame that provides exceptional durability and stability. The materials used in its construction not only enhance its strength but also contribute to the jack's longevity, making it a worthy investment for anyone involved in automotive maintenance.

In addition to its durable build, the jack is equipped with a quick-lift technology that streamlines the lifting process. This feature allows users to raise the jack to the vehicle's lifting point quickly and efficiently, reducing the time and effort required to get started on repairs. The extra-wide steel wheels enhance maneuverability, enabling users to navigate tight spaces easily while positioning the jack under the vehicle.

Safety is a top priority with the Harbor Freight Tools 69297. The jack includes a safety overload system that prevents it from lifting weights beyond its specified capacity. Moreover, the built-in safety release valve controls the descent of the jack, ensuring a smooth and controlled lowering of the vehicle, which is crucial during repairs.

Furthermore, the Harbor Freight Tools 69297 includes a padded handle that provides a comfortable grip while operating the jack. The handle's design allows for easy pumping with minimal effort, making it user-friendly for various skill levels.

In conclusion, the Harbor Freight Tools 69297 floor jack is a powerful, durable, and safe tool designed for efficient vehicle lifting. Its impressive capacity, robust construction, quick-lift technology, and user-friendly features make it an essential addition to any garage or workshop.