Harbor Freight Tools 69774 manual Pump Troubleshooting, Problem Possible Causes Likely Solutions

Page 17

Pump Troubleshooting

Problem

 

Possible Causes

 

Likely Solutions

 

1.

Incorrect lubrication or not

1.

Lubricate using recommended oil or

Pump overheats

 

enough lubrication.

 

grease according to directions.

2.

Worn parts.

2.

Have qualified technician inspect internal

 

 

 

 

 

mechanism and replace parts as needed.

 

 

 

 

 

 

1.

Low engine speed.

1.

Qualified technician should increase

 

 

 

 

no load speed to 3,800±100 RPM

Unit stalls

 

 

 

by adjusting pressure switch.

 

2.

Severely clogged air filter.

2.

Replace air filter.

 

3.

Improper lubrication.

3.

Check for proper oil level.

 

 

 

 

 

 

1.

Pump is not primed.

1.

Prime Pump.

 

2.

Intake Strainer clogged.

2.

Clean Intake Strainer or replace if damaged.

 

3.

Air leak at intake connector.

3.

Replace Coupling Gasket or tighten clamp.

Pump does not

4. Hose leaks.

4.

Replace hose.

pump water

5. Suction hose has collapsing wall.

5.

Use hose with non-collapsible wall.

 

6.

Hose has too small diameter.

6.

Use hose with diameter 2" or greater.

 

7.

Pump is too high above water surface.

7.

Locate Pump at a lower level so it doesn’t

 

 

 

 

have to work so hard to lift the water.

 

 

 

 

 

 

1.

Suction hose collapsed, damaged,

1.

Replace or adjust suction hose.

 

 

too long or diameter is too small.

 

 

Low Pump Output

2.

Air leak at connector.

2.

Replace Coupling Gasket or tighten Clamp.

3. Strainer clogged.

3.

Clean Strainer.

 

4.

Discharge hose damaged,

4.

Replace or adjust Discharge Hose.

 

 

too long or diameter too small.

 

 

 

 

 

 

 

Follow all safety precautions whenever diagnosing or servicing the equipment or engine.

SAFETY

SETUP

OPERATION

MAINTENANCE

ITEM 69774

For technical questions, please call 1-800-520-0882.

Page 17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Page Table of Contents Symbol Property or Statement Symbol DefinitionsEngine Precautions Operating Precautions Set up PrecautionsSafety Warnings Carbon Monoxide Hazard Using an engine indoors can KillRefueling Service PrecautionsTo Prevent Serious Injury Set UpControls Connecting Hoses Safety Operation Concerns See diagram belowLocating the Water Pump Prime the Pump OperationChecking and Filling Engine Oil Checking and Filling FuelStarting the Engine Break-in Period Stopping the EngineMaintenance and Service Cleaning, Maintenance, and Lubrication ScheduleTo Prevent Serious Injury from Accidental Starting To Prevent Serious Injury from Equipment FailureEngine Oil Change Cleaning Air Filter Element MaintenanceSpark Plug Maintenance Cap Recommended Spark PlugStorage Problem Possible Causes Likely Solutions Pump TroubleshootingProblem Possible Causes Probable Solutions Engine TroubleshootingDo not use gasoline with more than 10% ethanol E15, E20, E85, etcCompression Related section Use Engine will not startEmission Control System Warranty Limited 90 Day WarrantyUnited States Emission Control Defects Warranty Statement Manufacturer’s Warranty CoveragePlease Read the Following Carefully Part Description Qty Parts ListParts Lists and Diagrams Assembly Diagram Mission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 800

69774 specifications

Harbor Freight Tools has carved a niche in the world of affordable yet reliable tools, and the 69774 model is no exception. This all-in-one tool cart appeals to both amateur and professional users seeking efficient organization for their tools. One of the main features of the Harbor Freight Tools 69774 is its sturdy construction. Made from durable steel, this tool cart offers exceptional longevity, ensuring it can withstand the rigors of a busy workshop or garage environment.

Additionally, the 69774 model comes equipped with a powder-coated finish that resists rust and corrosion, allowing it to maintain its aesthetic appeal and functionality over time. The tool cart features a spacious work surface made from hard rubber, providing ample workspace for various projects. This hard rubber surface not only offers a solid platform but also enhances grip, reducing the chances of slipping during use.

The 69774 model includes an ergonomic handle that facilitates easy maneuverability, making it convenient to move the cart around the workplace. With four durable swivel casters, which include locking mechanisms, the cart offers stability and flexibility, enabling users to secure it in place when needed.

Storage capacity is a top priority for the Harbor Freight Tools 69774, and this cart does not disappoint. It comes with multiple drawers, providing ample space for organizing hand tools, power tools, and accessories. The drawers are ball-bearing slides, ensuring smooth opening and closing, even when fully loaded.

Another noteworthy characteristic is the presence of side trays, which offer additional convenience, allowing users to have essential tools readily available. The integrated power strip with multiple outlets is a significant technological advantage of this model, enabling users to plug in various tools and devices without the need for additional power sources.

In summary, the Harbor Freight Tools 69774 tool cart is an exemplary piece of equipment designed with durability, functionality, and user convenience in mind. With its robust construction, ample storage, and innovative features, this tool cart is ideal for anyone looking to streamline their tool organization and improve their workspace efficiency. Whether for professional trades or DIY enthusiasts, the 69774 is a valuable addition to any toolkit.
Top Page Image Contents