Ingersoll-Rand 66610X-X-C manual General Description Maintenance, AIR and Lube Requirements

Page 3

GENERAL DESCRIPTION

 

MAINTENANCE

The ARO diaphragm pump offers high volume delivery even at low air pressure and a broad range of material compatibility options available. Refer to the model and option chart. ARO pumps feature stall resistant design, modular air motor / fluid sections.

Air operated double diaphragm pumps utilize a pressure differential in the air chambers to alternately create suction and positive fluid pressure in the fluid chambers, ball checks insure a positive flow of fluid.

Pump cycling will begin as air pressure is applied and it will continue to pump and keep up with the demand. It will build and maintain line pres- sure and will stop cycling once maximum line pressure is reached (dis- pensing device closed) and will resume pumping as needed.

AIR AND LUBE REQUIREMENTS

WARNING EXCESSIVE AIR PRESSURE. Can cause pump damage, personal injury or property damage.

SA filter capable of filtering out particles larger than 50 microns should be used on the air supply. There is no lubrication required other than the .

SIf lubricated air is present, make sure that it is compatible with the rings and seals in the air motor section of the pump.

OPERATING INSTRUCTIONS

SAlways flush the pump with a solvent compatible with the material being pumped if the material being pumped is subject to

when not in use for a period of time.

SDisconnect the air supply from the pump if it is to be inactive for a few hours.

SThe outlet material volume is governed not only by the air supply but also by the material supply available at the inlet. The material supply tubing should not be too small or restrictive. Be sure not to use hose which might collapse.

SWhen the diaphragm pump is used in a forced-feed (flooded inlet)

situation, it is recommended that a

alve" be installed at the

air inlet.

 

SSecure the diaphragm pump legs to a suitable surface to insure against damage by vibration.

Refer to the part views and descriptions as provided on pages 4 through 7 for parts identification and service kit information.

SCertain ARO

for fast repair and reduction of down time.

SService kits are divided to service two separate diaphragm pump functions: 1. AIR SECTION, 2. FLUID SECTION. The FLUID SEC- TION is divided further to match typical part MATERIAL OPTIONS.

SProvide a clean work surface to protect sensitive internal moving parts from contamination from dirt and foreign matter during service disassembly and reassembly.

SKeep good records of service activity and include pump in preven- tive maintenance program.

SBefore disassembling, empty captured material in the outlet man- ifold by turning the pump upside down to drain material from the pump.

FLUID SECTION DISASSEMBLY

1.Remove top manifold(s).

2.Remove (22) balls, (19)

3.Remove (15) fluid caps.

NOTE: Only Teflon diaphragm models use a primary diaphragm (7) and a backup diaphragm (8). Refer to the auxiliary view in the Fluid Section illustration.

4.Remove the (14) screws, (6) washers, (7) or (7 / 8) diaphragms and

(5) washers.

5.Remove (3)

NOTE: Do not scratch or mar the surface of (1) diaphragm rod.

FLUID SECTION REASSEMBLY

SReassemble in reverse order.

SClean and inspect all parts. Replace worn or damaged parts with

new parts as required.

 

S Lubricate (1) diaphragm rod and (2)

R grease.

SUse ARO pn / 98930-T bullet (installation tool) to aid in installation of

(2)

SBe certain (7) or (7 / 8) diaphragm(s) align properly with (15) fluid caps before making final torque adjustments on bolt and nuts to avoid twisting the diaphragm.

SFor models with Teflon diaphragms: Item (8) Santoprene diaphragm is installed with the side marked

ter body. Install the Teflon diaphragm with the side marked SIDE" towards the fluid cap.

SRe-check torque settings after pump has been re-started and run a while.

S VitonR, TeflonR and HytrelR are trademarks of the DuPont Company, S KynarR is a trademark of Penwalt Corp. S LoctiteR is a registered trademark of Henkel Loctite Corporation S

S SantopreneR is a registered trademark of Monsanto Company, licensed to Advanced Elastomer Systems, L.P. S Key-LubeR is a registered trademark of Key Industries S

66610X-X-C

Page 3 of 8

Image 3
Contents Pump Data Service KitsModel Description Chart Ratio MetallicOperating and Safety Precautions AIR and Lube Requirements General Description MaintenanceFluid Section Disassembly Fluid Section Reassembly637167 Parts List / 66610X-X-C Fluid SectionFor AIR Motor Section See Pages 6 ’’ Outlet’’ Inlet Parts List / 66610X-X-C AIR Motor Section Pilot Valve Major ValveDimensional Data Trouble Shooting

66610X-X-C specifications

The Ingersoll-Rand 66610X-X-C is a robust, high-performance air compressor that has gained traction across various industries due to its reliability and efficiency. This particular model stands out in terms of versatility and is widely used in manufacturing, construction, and automotive applications.

One of the main features of the Ingersoll-Rand 66610X-X-C is its powerful motor, which offers impressive output while maintaining energy efficiency. The compressor is designed to deliver high-flow performance, ensuring that it meets the demands of various pneumatic tools and equipment. An integrated air dryer is also a standard feature, which helps to eliminate moisture from the compressed air, prolonging the lifespan of tools and improving overall efficiency.

The 66610X-X-C utilizes advanced technology to optimize its operational performance. With its variable speed drive, the compressor can adjust its output based on the demand, saving energy and reducing operational costs. This feature also helps in minimizing wear and tear on the unit, resulting in lower maintenance needs over its lifespan.

In terms of design, the Ingersoll-Rand 66610X-X-C boasts a compact and portable structure, making it easy to transport and move around job sites. Its rugged construction ensures it can withstand harsh working environments and demanding applications. The compressor is also equipped with a user-friendly control panel that allows for easy monitoring and adjustments, enhancing the overall user experience.

Safety features are prominent in the design of the 66610X-X-C. The unit is fitted with automatic shut-off capabilities and pressure relief valves to prevent damage from excessive pressure levels. Additionally, it is designed to operate at lower noise levels, making it suitable for use in more noise-sensitive environments, ensuring a safer and more comfortable working atmosphere.

Another commendable characteristic of the Ingersoll-Rand 66610X-X-C is its low maintenance requirements. Thanks to its durable construction and reliable components, users can expect longer intervals between service needs, which contributes to cost savings in the long run.

In conclusion, the Ingersoll-Rand 66610X-X-C is a feature-rich air compressor that combines power, efficiency, and reliability. Its advanced technologies and robust construction make it a valuable asset for various industrial applications, catering to both high demand and precision needs. Whether for construction or manufacturing, this model exemplifies what modern air compressors should aspire to be, standing as a testament to Ingersoll-Rand’s commitment to innovation and quality in the field of compressed air solutions.