Harman-Kardon HK 3470 owner manual Programming the Remote Buttons Is a Simple Procedure

Page 18

Operation

Programming the Remote Buttons Is a Simple Procedure

Step 1: Place the HK 3470 remote control and the remote control for the other device (e.g., compact disc player) so that their infrared transmitter windows face each other at a distance of about one-half inch.

Step 2: Simultaneously press the Learn button

√and the Source Selector ç that corre- sponds to the device whose codes you are trying to program (e.g., press the CD button along with the Learn button). The LED Indicator Ω will blink once and remain lit.

Step 3: Press and release the button on the HK 3470 remote that you wish to program. Make sure that it is one of the program- mable buttons listed in the table on page

17.The LED Indicator Ω will blink once and remain lit.

Step 4: Press and hold the button on the other device’s remote whose code you wish to program into the HK 3470 remote until the LED Indicator Ω blinks three times and remains lit, then release the button on the other remote.

If the LED Indicator Ω flickers for five sec- onds instead of blinking three times and remaining lit, the learning operation was unsuc- cessful. Try the procedure again, starting from Step 2, making sure that the transmitter win- dows of the two remotes face each other, and that the button you are trying to program on the HK 3470 remote is listed in the table on page 17.

Step 5: To program additional buttons, repeat Steps 2 through 4.

Step 6: To exit the learning mode, either press the Learn button √ once, or wait 20 sec- onds for the remote to automatically return to normal operation.

Resetting One Key to Default Setting

When a new code is programmed into the remote, it overwrites the previous code for that button on that page. However, should you make a mistake, it is possible to reset any but- ton to its factory default using the following procedure:

Step 1: Enter the learning mode by simultane- ously pressing any of the Device buttons ç and the Learn button √.

Step 2: Press and release the particular device button for the page containing the key you wish to reset. The LED Indicator Ω will blink once and remain on.

Step 3: Use the Numeric Keys ˚ to enter the numbers “777”. The LED Indicator Ω will blink for each entry.

Step 4: Press and release the button that you wish to reset. The LED Indicator Ω will blink three times to indicate that the button has been reset to the factory default code.

Step 5: You may repeat Step 4 to reset the codes for other keys. If you wish to reset the codes for an entire device page, see below.

Step 6: To exit the learning mode, either press the Learn button √ once, or wait 20 sec- onds for the remote to automatically return to normal operation.

Resetting an Entire Device Page

If you wish to reset all of the codes for a partic- ular device, you need not individually reset every button on that page of the remote. This is the procedure for resetting the codes on a par- ticular page.

Step 1: Enter the learning mode by simultane- ously pressing any of the Device buttons ç and the Learn button √.

Step 2: Press and release the particular device button for the page you wish to reset. The LED Indicator Ω will blink once and remain on.

Step 3: Use the Numeric Keys ˚ to enter the numbers “888”. The LED Indicator Ω will blink for each entry.

Step 4: The LED Indicator Ω will remain on for one second, and then blink three times to indicate that it has reset the group of keys for the selected device page. That device page will now operate the factory default set of codes.

Resetting the Entire Remote

It is also possible to completely reset all of the programmed codes in the remote to the factory default settings. Use the following procedure:

Step 1: Enter the learning mode by simultane- ously pressing any of the Device buttons

çand the Learn button √.

Step 2: Press and release any device button other than PHONO, AM or FM. The LED Indicator Ω will blink once and remain on.

Step 3: Use the Numeric Keys ˚ to enter the numbers “999”. The LED Indicator Ω will blink for each entry.

Step 4: The LED Indicator Ω will remain on for five seconds, and then blink three times to indicate that it has reset all of the keys on the remote. The entire remote will now oper- ate the factory default set of codes.

18OPERATION

Page 17 Page 19
Image 18
Page 17 Page 19
Contents HK 3470 Stereo Receiver HK 3470 Stereo Receiver Important Safety Information IntroductionSafety Information UnpackingFront Panel Controls Mon Tape Monitor Input Selector FM Mode SelectorPower Indicator This LED will light Phono Input Selector FM/AM SelectorOFF Mute Indicator This indicator lights to Front Panel Information Display¢ Remote IR ⁄ Tape Play/In · Accessory OutletsRear Panel Connections ∞ Remote IR Out ¤ Tape Record/OutConnect the output of the sensor to this jack Remote Control Functions ∆ Direct Button ˚ Numeric Keys ¬ Auto PresetTuning Up/Down When the tuner is Numeric Keys K. See page 15 for more informationInformation Audio Equipment Connections Installation and ConnectionsSystem Installation Connect the analog output of a CD player to the CD inputs ¶External Audio Power Amplifier Connections System and Power ConnectionsRemote Control Extension AC Power ConnectionsSource Selection OperationBasic Operation Tuner OperationRecalling Preset Stations Preset TuningAuto Preset Clearing Preset StationsTuning Down Using the Remote ControlTuning Up Rec./PauseAbility to perform some functions using Programming the Remote ControlAlthough the remote control is prepro Not all of the buttons on the HK 3470 remoteResetting an Entire Device Programming the Remote Buttons Is a Simple ProcedureResetting One Key to Default Setting Resetting the Entire RemoteProcessor Reset Troubleshooting GuideMemory Backup If the problem is Make sure thatTechnical Specifications @ 1W +0dB, -3dB
Related manuals
Manual 24 pages 60.73 Kb

HK 3470 specifications

The Harman-Kardon HK 3470 is a versatile stereo receiver that combines pristine sound quality with a plethora of features designed for audio enthusiasts. Known for their commitment to high-fidelity sound, Harman-Kardon has engineered the HK 3470 to deliver an exceptional listening experience, whether for music, movies, or gaming.

One of the standout features of the HK 3470 is its powerful amplification capabilities. With 120 watts per channel, this receiver can easily drive a variety of speakers, allowing users to enjoy dynamic and clear sound across a wide range of volumes. This amplification is supported by Harman-Kardon's advanced circuitry, which minimizes distortion and enhances audio clarity, creating an immersive listening environment.

The HK 3470 comes equipped with multiple audio inputs, including five line-level inputs, a dedicated phono input for vinyl enthusiasts, and digital inputs for modern devices. This variety allows users to connect their favorite sources, from smartphones and tablets to CD players and turntables, ensuring compatibility with any audio setup. Additionally, the receiver features an FM/AM tuner with a large number of presets, enabling easy access to different radio stations.

In terms of technology, the HK 3470 utilizes Harman-Kardon's proprietary technologies such as the Quadruple Power Supply, which enhances performance during dynamic audio playback. Additionally, the receiver includes a remote control, making it user-friendly and convenient for adjusting settings from a distance.

The aesthetic appeal of the HK 3470 should not be overlooked. Its sleek design, featuring a brushed aluminum front panel and distinct display, adds a touch of sophistication to any audio system. The easy-to-read LCD screen provides essential information, such as input selection and volume levels, further enhancing the user experience.

Overall, the Harman-Kardon HK 3470 is an impressive stereo receiver that caters to audiophiles looking for high-quality sound and versatility. With its robust amplification, generous connectivity options, and elegant design, it stands as a reliable choice for anyone wanting to elevate their audio experience. Whether for casual listening or intense audio playback, the HK 3470 delivers a performance that truly resonates with users, capturing the essence of music and sound in a captivating manner.
Top Page Image Contents