Bravo View B409 Mandatory AIR Integrity Test, If ANY Leaks are Found, Quality Standard

Page 6

B - MANDATORY AIR INTEGRITY TEST

B.1 - Use test assembly and pressure sump to no more

than 4 PSI. Close off with ball valve and resume other work. Allow 1 Hour before recording pressure.

BRAVO

QUALITY

STANDARD

FIELD AIR INTEGRITY INSPECTION TEST : Hold pressure for a

minimum of 1 hour for a Field Integrity Inspection Test. The Tank Sump PASSES the integrity test if the Sump shows NO signs of continuous pressure decay.

IF TEST PASSES - CONTINUE ON TO THE HYDROSTATIC FILL & INTEGRITY TEST.

B.2 - IF ANY LEAKS ARE FOUND!!

Look at edges and corners for pinhole leaks. For large leaks, consult factory.

A:Locate leak point(s) and mark with marker so you can locate it / monitor it.

B:Repair or reinstall doublewall penetration fittings according to your doublewall penetration fitting manufacturers’ Installation / Maintenance Instructions.

C:Abrade a 2” diameter area centered on the leak point until natural resin/fiberglass material can be seen. Dust with shop brush or compressed air and do not use shop towels or acetone on the abraded area(s). Then apply a 3-layer strip of 2” x 2” resin-saturated fiberglass mat squarely on the abraded area.

D:Roll out any air bubbles with chamfer roller. Let cure.

E:After cure, knock down fiberglass hairs, and apply another flow coat of

resin only. Apply any extra resin to repaired leak point(s) while still wet. Let cure for a minimum of 4 hours @ or above 75° F.

FOR HYDROSTATIC MONITORING - PROCEED TO SECTION C.

FOR CONTINUOUS VACUUM MONITORING - The B409 DoubleWall Solid Sump w/Bottom cannot exceed 16” of Mercury. (Vacuum) Follow your vacuum system manufacturer’s installation instructions to install, seal, and monitor the doublewall system with vacuum.

Continue to Section F.

Connect the SVA-BARB to your factory-installed gauge for vacuum monitoring

Ensure that the fittings that are being used with the Vacuum Monitored System can withstand the amount

of Vacuum your Monitoring System will generate.

6ii-B409-DW-10A

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Installation Instructions Table of Contents Warranty is Void Before Penetrating FiberglassEquipment DRY-FIT 33-SAND-KITBefore Installing Penetration Fittings CAP SVA-BARBDo not Fill Double Wall Penetration Fittings Quality Standard Mandatory AIR Integrity TestIf ANY Leaks are Found For Hydrostatic Monitoring Proceed to Section CVacuum / Hydrostatic Filling Slowly open ball valve Advanced Leak Detection Procedure PAY Close and Special Attention to FIELD-INSTALLEDThese are Common Leak Points Aldp in Action Diagram Connecting to Manometer Fig. E.7Concrete and Backfill Guidelines Concrete Slab

B409 specifications

The Bravo View B409 is a remarkable addition to the world of contemporary display technology, designed for users who demand high-quality visuals and versatile functionality. This monitor offers a range of features that make it suitable for both professional and personal use, catering to graphic designers, gamers, and casual users alike.

One of the standout characteristics of the Bravo View B409 is its impressive 4K Ultra HD resolution, allowing for stunning clarity and detail. With a resolution of 3840 x 2160 pixels, it delivers four times the detail of Full HD, ensuring sharp images and vibrant colors. This high resolution is complemented by a wide color gamut, enabling vivid representation of colors that meets the needs of those in creative industries as well as avid movie watchers.

The display utilizes advanced IPS (In-Plane Switching) technology that ensures wide viewing angles up to 178 degrees. This means that colors remain consistent and true to life, whether viewed from the front or side. Furthermore, the Bravo View B409 is equipped with a flicker-free screen and low blue light technology, which reduces eye strain during prolonged usage, making it an ideal choice for long working hours or binge-watching sessions.

The monitor also features multiple connectivity options, including HDMI, DisplayPort, and USB-C. This versatility allows users to easily connect various devices, such as laptops, PCs, or gaming consoles, without the hassle of constantly switching cables. Additionally, the USB-C port facilitates charging and data transfer, providing a convenient all-in-one solution for users of modern devices.

For gamers, the Bravo View B409 boasts a high refresh rate, which significantly enhances the gaming experience by ensuring smooth motion and reducing lag. With adaptive sync technology, it minimizes screen tearing and stuttering, creating a seamless gameplay experience.

The ergonomic design of the Bravo View B409 includes an adjustable stand that allows for tilting and height adjustments to ensure optimal comfort while using the monitor. Its sleek and modern aesthetic makes it an attractive addition to any workspace or entertainment setup.

In summary, the Bravo View B409 is a feature-rich monitor that combines advanced display technologies and user-friendly characteristics. Its high resolution, wide viewing angles, extensive connectivity options, and gamer-friendly features make it a top choice for anyone looking to enhance their visual experience.
Top Page Image Contents