Oreck STEAM200 manual Cleaning Glass Surfaces, Bedding and Upholstery

Page 17

Cleaning

TIPS

Cleaning Glass Surfaces

!WARNING!

Sudden application of excessive heat may shatter glass and cause serious injury. Always warm glass surfaces gradually when applying steam to the glass.

1.Warm the glass by applying the steam evenly to the glass from a distance of eight to ten inches.

2.Apply steam to clean the glass at a distance of four to six inches.

3.Switch the steam OFF and wipe the moisture off the glass (top to bottom) with the window squeegee.

4.Wipe the squeegee and lower edge of the glass. Dry after each pass.

Bedding and Upholstery

1.Attach the upholstery nozzle.

2.Pass the steam slowly and evenly over the surfaces ensuring all areas are cleaned.

3.Repeat the process in a cross pattern.

4.Allow the mattress or furniture to dry before covering with bedding or covers.

To clean very dirty areas move the nozzle slowly across the surface.

Turn the cloth and change regularly to optimize cleaning power of the cloth.

17

Image 17
Contents Steam-AllTMCanister Enjoy Call Click Visit Welcome to our Call. Click. Visit. customer serviceUSA Canada 18886732578Contents General Warnings SafetyPage Grounded Plug Product Components PartsThermostat Indicator Light Safety lock buttonPower Light ON/OFF ButtonAttach the Floor Nozzle Attach the Hose/HandleAttaching the Jet Adaptor to Nozzles To attach the shoulder strap Adaptors Nozzles and Their AccessoriesChoose the Attachments Fill the Boiler Tank Before You Begin CleaningConnect the Hose/Handle and Attachments Refilling the Boiler TankTurn the Steamer on TipPress and hold the steam Apply SteamBedding and Upholstery Cleaning Glass SurfacesAfter Using the Steamer De-scaling the Boiler Tank MaintenanceRinsing the Boiler Tank Problem Check Solution TroubleshootingAccessories Replacement PartsSteam-All Canister WarrantyPage REV a 09/10 ECN R-10091