Morphy Richards Carpet Cleaner manual Preparing to use, Cleaning tips, Upholstery shampoo nozzle

Page 13

70223 Rev 2 9/8/04 4:00 PM Page 13

Preparing to use

1Ensure that the shampooing attachments

have been correctly assembled as shown previously.

2Check that there is water and cleaning solution in the clean water tank.

3Remove furniture from the room to be cleaned, or move it away from the cleaning area.

4Position the shampoo nozzle at a point furthest away from the vacuum cleaner where you intend to begin cleaning.

5Plug in and press the rocker switch to the

IIposition.

6Apply shampoo to a strip of carpet and then switch the rocker switch to I to vacuum away the shampoo and the dirt.

Cleaning tips

•Position the vacuum cleaner near the doorway to the room, extend the hose fully and work backwards towards the doorway. This avoids walking over the cleaned carpet until drying is complete.

•Work on a strip at a time. Apply shampoo and then vacuum away with backwards and forwards strokes before moving onto the next strip. M

•For particularly dirty patches, move the shampoo nozzle backwards and forwards over the area so that the brush in the shampoo nozzle scrubs the carpet.

•Avoid over wetting and, if necessary, pass over the area using suction only.

•For heavily soiled areas, it is advisable to repeat the cleaning process.

•Do not walk over newly cleaned carpet until it is fully dry.

•Do not replace furniture until the carpet is completely dry.

Upholstery shampoo nozzle

The upholstery shampoo nozzle is ideal for cleaning sofas, chairs, stairs and car interiors. O

It can be attached directly onto the handle.

The shampoo tube fixes in the same way as the floor nozzle. N

Emptying

It is advisable to empty the dirty solution after each tankful of water and cleaning solution has been used.

1Switch off the machine and remove the

plug from the mains.

2Lift up the hose so that any dirty water remaining will drain back into the waste tank.

3Remove the hose end from waste tank.

4 Remove the motor housing and lift out the bucket by the handle.

5 After emptying, refit the bucket and reassemble the machine.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents In-1 cleaning system Location Important safety instructionsElectrical requirements How does your cleaner work?Introduction Wet & dry vacuuming usage Features Assembly B1 Á Rev 2 9/8/04 400 PM Cartridge filter Power controlsFiltration Exhaust filter Float shut-offEmptying Crevice and upholstery toolsCable storage Dust collection bagsControls Shampooing instructions Features3634 Rev 2 9/8/04 400 PM Preparing to use Cleaning tipsUpholstery shampoo nozzle Storage How to get the best from your shampoo systemHelpline Your two-year guarantee PN869/09/70 Rev 2

Carpet Cleaner specifications

The Morphy Richards Carpet Cleaner is a state-of-the-art home appliance designed to make deep cleaning carpets an effortless task. With its advanced features and innovative technology, this carpet cleaner stands out in the market for both its effectiveness and ease of use.

One of the primary features of the Morphy Richards Carpet Cleaner is its powerful suction capability. The high-performance motor generates strong suction that effectively lifts dirt, stains, and allergens from deep within carpet fibers. This results in a thorough cleanse, revitalizing carpets and leaving them looking fresh and new.

Another notable aspect of this cleaner is its dual-tank system. This design separates clean water from dirty water, ensuring that only clean water and solution are used during the cleaning process. This not only enhances cleaning efficiency but also prevents the redistribution of dirt back into the carpet. The large capacity of the clean water tank minimizes the need for frequent refills, making large cleaning tasks more manageable.

The Morphy Richards Carpet Cleaner features a variety of cleaning modes tailored to different surfaces and types of stains. Whether tackling a high-traffic area, pet messes, or ingrained dirt, users can select the appropriate mode for optimal results. This versatility allows for customized cleaning experiences based on specific needs.

In addition, the appliance is equipped with a range of brush types, including rotating brushes that penetrate deep into carpet fibers. This ensures even stubborn stains are effectively lifted away. The brushes are engineered to be gentle on carpets while still delivering powerful cleaning capabilities.

Another innovative technology integrated into the Morphy Richards Carpet Cleaner is its quick-drying mechanism. This feature improves airflow during and after the cleaning process, allowing carpets to dry faster and reducing the risk of mold or mildew development.

Finally, the Morphy Richards Carpet Cleaner comes with an ergonomic design, featuring a lightweight body and comfortable handle, making it easy to maneuver around the home. The built-in carrying handle and compact design aid in convenient storage when not in use.

In summary, the Morphy Richards Carpet Cleaner combines powerful suction, a dual-tank system, versatile cleaning modes, specialized brushes, quick-drying features, and user-friendly design elements. This makes it an excellent choice for anyone looking to maintain the cleanliness and appearance of their carpets.
Top Page Image Contents