Harman-Kardon AVR 3650, AVR 2650 Connect The Bridge Iiip, Connect to Your Home Network

Page 20

AVR

Making Connections

Connect Your Audio Recorders

Connect a digital audio recorder’s optical digital input to the AVR’s optical digital output. You can record both coaxial and optical digital audio input signals.

Receiver

Digital Audio Recorder Connector

Optical Digital Audio

Cable (not supplied)

To Optical Digital

Record Input

Digital

Recording Device

Connect an analog audio recorder’s inputs to the AVR’s analog audio Rec Out connectors. You can record any analog audio input signal.

Receiver

Analog Audio Recorder Connectors

Connect The Bridge IIIP

Connect an optional The Bridge IIIP to the AVR’s The Bridge IIIP connector. Insert the plug until it snaps into place in the connector. IMPORTANT: Connect The Bridge IIIP only with the AVR’s power turned OFF.

AVR

The Bridge IIIP

Connector

The Bridge IIIP

Dock your iPod or iPhone (not included) in The Bridge IIIP, and you may listen to its audio through your high-performance audio/video system. You may also view still images or video materials stored on a photo- or video-capable iPod or iPhone that supports video browsing. You can use the AVR remote to control the iPod, with navigation messages displayed on the AVR’s front panel and on a video display connected to the AVR.

Connect to Your Home Network

Use a Cat. 5 or Cat. 5E cable (not supplied) to connect the AVR’s Network connector to your home network to enjoy Internet radio and content from DLNA-compatible devices that are connected to the network.

Stereo Audio

Cable (not supplied)

To Stereo Analog

Record Inputs

Analog

Recording Device

Connect Your Video Recorder

Receiver

Network

Connector

Cat. 5/5E Cable (not supplied)

Network

Modem

To

Internet

and LAN

Connect an analog video recorder’s video input connector to the AVR’s Composite Video Rec Out connector. You can record any composite video signal. NOTE: To record the audio and video from the source device, connect the AVR’s analog audio Rec Out connectors to the analog video recorder’s audio inputs.

Receiver Analog Video

Recorder Connectors

Receiver Analog Audio

Recorder Connectors

Analog Audio/Video Cable (not supplied)

To Analog

Audio/Video

Record Inputs

Analog Video

Recording Device

Connect the Radio Antennas

•• Connect the supplied FM antenna to the AVR’s FM 75Ω antenna connector. For the best reception, extend the FM antenna as far as possible.

•• Bend and fold the base of the supplied AM antenna as shown and connect the antenna wires to the AVR’s AM and Gnd connectors. (You can connect either wire to either connector.) Rotate the antenna as necessary to minimize background noise.

AVR

Antenna

Connectors

FM Antenna (supplied)

AM Antenna

(supplied)

Bend and fold base

20

Image 20
Contents AVR 3650,AVR 365 AVR 2650,AVR Table of Contents AVRPlace the Receiver Supplied AccessoriesIntroduction Power Front-Panel ControlsButton USbAVR Rear-Panel Connectors Rear-Panel Connectors Mute button Info button Avr button Zone Selector Switch Source SelectorOk button backlight button C/d buttonsSystem Remote Control Functions Mute button Sleep button Menu button Transport control buttons Zone Indicator lightOk button Zone 2 Remote Control Functions AVR 3650/AVR 365 only Introduction to Home Theater Introduction to Home TheaterTypical Home Theater System Multichannel AudioPlace Your Speakers Place Your SpeakersTypes of Home Theater System Connections Speaker ConnectionsSubwoofer Connections Source Device ConnectionsVideo Connections Sirius Satellite Radio Network Connector RS-232 ConnectorRadio Connections USB PortMaking Connections Making ConnectionsConnect Your Speakers Connect Your SubwooferConnected Component Default Source Button Assigned Monitor Output Connector Connected ComponentRecord Output Connector Connected Component Connect Your Audio and Video Source DevicesConnect Your Hdmi Devices Connect Your Component Video DevicesConnect Your Composite Video Devices Connect Your Optical Digital Video DevicesConnect The Bridge Iiip Connect to Your Home NetworkConnect the Radio Antennas Connect Your Audio RecordersMain Room Install a Multizone SystemZone Connect IR Equipment AVR 3650/AVR 365 only Zone 2 Amplifier Not suppliedZone Main Room Mono 1/8-inch 3.5mm Mini-Plug Interconnect Not suppliedSet Up the Remote Control Connect to AC PowerInstall the Batteries in the Remote Control Connect the 12V Trigger OutputLearning AVR 3650/AVR 365 only Set Up the Remote ControlIf the device does not turn off, enter another code number Set Up the AVR Set Up the AVRUsing the On-Screen Menu System Configure the AVR for Your SpeakersSet Up Your Sources Speaker Setup Automatic Setup EzSet/EQCreating Hdmi Bypass Inputs Set Up the NetworkNetwork Settings Automatic Operating Your AVR Operating Your AVRListening to FM and AM Radio Listening to Sirius Satellite RadioIPod or iPhone Function Remote Control Key Listening to Media on a USB Device AVR 3650/AVRListening to an iPod/iPhone Device Playing files on a USB deviceInternet Radio Internet Radio PresetsListening to Internet Radio Selecting a Surround Mode Listening to Media via Your Home NetworkAudio Effects Video ModesAudio Processing and Surround Sound Advanced FunctionsAdvanced Functions Video Mode Movie Video ProcessingAudio Effects Button Center WidthHow to Adjust the Custom Picture Settings Brightness AdjustmentVideo Mode Custom Noise Reduction OffManual Speaker Setup Manual Speaker Setup Sub ModeNumber of Speakers Crossover SizeStep Four Setting Channel Output Levels Manually Set the Speaker DistancesSystem Settings Hdmi SettingsListening in Zone Status This line lets you turn Zone 2 on or offSystem Settings Settings LockGeneral AVR Settings Menu AppearanceRecording Advanced Remote Control ProgrammingSleep Timer To reset the AVR’s processor Resetting the RemoteProcessor Reset Troubleshooting Symptom Cause SolutionSpecifications SpecificationsAppendix Default settings, worksheets, remote product codes Table A2 Source Setting DefaultsAppendix Table A1 Recommended Source Component ConnectionsTable A3 Speaker/Channel Setting Defaults Table A4 Delay Setting DefaultsYour Settings Audio Input Connectors Position 100Hz Speakers Crossover Frequency Subwoofer ModeTable A5 Source Settings Table A6 Audio Effects SettingsTable A7 Video Modes Settings Table A8 Surround ModesBlu-ray Media Radio Disc Server 3650 Bridge 2650 AVRTable A9 Remote Control Codes Table A10 System SettingsTable A11 Zone 2 Settings Feature Default Your SettingsSurround Mode Description Incoming Bitstream or Signal Table A12 Surround ModesDolby Digital 2/0/.0 or .1, 2/2/.0 or .1, 3/2/.0 or .1, EX Surround back channelDolby Digital 2/0/.0 or Front left and right speakersDTS Neo6 DTS 2/2/.0 or .1, 3/2/.0 orModes. Three variants are available Logic Music Tuner PCM 32kHz, 44.1kHz, 48kHz, 96kHz LogicAVR AVR 3650/AVR 365 only Table A13 Remote Control Function ListMedia Server Table A13 Remote Control Function List AUXTable A14 Remote Control Product Codes TV Setup Code NumberTable A16 Remote Control Product Codes AUX-VCR Table A15 Remote Control Product Codes AUX-HDTVTable A16 Remote Control Product Codes Table A17 - Remote Control Product Codes AUX-CD Table A18 - Remote Control Product Codes DVDTable A19 - Remote Control Product Codes SAT Table A20 Remote Control Product Codes GameTable A21 - Remote Control Product Codes Cable Game Manufacturer Setup Code Number BrandManufacturer/Brand Setup Code Number Table A22 Remote Control Product Codes Media ServerTable A24 Remote Control Product Codes AUX- TiVo

AVR 365, AVR 265, AVR 3650, AVR 2650 specifications

The Harman-Kardon AVR 2650 and AVR 3650 are part of a distinguished line of AV receivers that combine high-performance audio and video capabilities with sophisticated technology. Designed to enhance the home entertainment experience, these models stand out for their rich feature sets and exceptional sound quality.

The AVR 2650 is a 7.1-channel receiver that delivers 95 watts per channel, providing robust audio output for both movies and music. It boasts advanced audio processing technologies, including Dolby TrueHD and DTS-HD Master Audio, ensuring that every sound detail is faithfully reproduced. The inclusion of a USB port allows users to connect and play audio files directly from compatible devices, while built-in Bluetooth connectivity offers seamless streaming from smartphones and tablets.

In terms of video performance, the AVR 2650 supports 4K Ultra HD content and is equipped with HDMI inputs that facilitate multiple device connections. The unique Harman Kardon EzSet/EQ feature facilitates easy setup and calibration, optimizing the audio experience based on the room's acoustics for a perfect balance.

The AVR 3650, on the other hand, offers a more advanced setup with 9.1-channel processing and a higher output wattage of 105 watts per channel. This model is designed for audiophiles who demand the utmost in sound clarity and immersive experiences. The AVR 3650 boasts additional features, such as multi-zone capability, allowing users to enjoy different audio sources in multiple rooms simultaneously.

Both models incorporate advanced surround sound technologies, providing 3D audio immersion that complements modern films. Furthermore, these receivers feature HDMI pass-through, which allows for easy switching between high-definition sources without compromising signal quality. Moreover, the AVR series supports a variety of high-definition audio formats, ensuring playback of the latest audio technologies.

The AVR 265 and AVR 365 are earlier models but share core characteristics that define Harman-Kardon's legacy in the audio market. They offer similar surround sound capabilities and are engineered to provide outstanding audio fidelity. Compatible with various streaming services, these models ensure that users have access to a broad array of entertainment options right at their fingertips.

In summary, the Harman-Kardon AVR 2650 and AVR 3650, along with the AVR 265 and AVR 365, continue the brand's tradition of blending innovative technology with user-friendly design. Whether for casual listening or a full home theater setup, these receivers deliver stunning performance, making them an ideal choice for any audio enthusiast.