Operation
Oxy Gen2 PowerTool™
To use the Oxy Gen2 PowerTool:
1. | Pull out the rubber stopper in the tank. |
|
2. | Fill with Oxy Gen2® formula. |
|
3. | Replace the rubber stopper and attach the | Rubber Stopper |
| tool to the hose grip. | |
|
|
4.Refer to page 9 “Ready Tools” steps
Maintenance and care
Machine care
For best results, a few simple steps can assure
your machine is well maintained after yourLint Screen cleaning is complete.
1.Turn power switch OFF ( 0 ). Unplug the machine and wrap the power cord.
2.After emptying the collection tank, rinse it with running hot tap water, taking care to clean all around the interior.
3.Clean out the lint screen if necessary by wiping clean any visible residue.
4.Replace the collection water tank on the machine.
4.Any loose hair or debris can be pulled from the TLR PowerRoller and thrown away.
5.To clean the attachments, remove from hose and rinse in clean, running water. Dry before storing. Clean the hose by suctioning clean water from the tap. Before wrapping back on machine, lift end of hose and stretch out to ensure all water is cleared from hose while still suctioning.
6.Wipe the machine’s exterior with a soft cloth and store properly, refer to page 11.
10 w w w . b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
10/14/08 1:26:00 PM |