Bissell 5200 Flipping from dry to wet cleaning, Wet cleaning/vacuuming, Dirty tank is full

Page 7

Operation

Flipping from dry to wet cleaning

To change from dry vacuuming, to wet cleaning simply flip the unit around to the wet vacuum side!

The Gentle Clean™ Brush or Pad and squeegee will automatically be lowered to effectively clean and dry all your hard floor surfaces.

Wet cleaning/vacuuming

To begin wet cleaning, simply pull the spray trigger. Water and formula will be dispensed through the Gentle Clean™ Brush or Pad.

To maximize the area to be cleaned, it is recommended that the spray trigger is squeezed on the forward stroke and released on the rearward stroke.

This will dispense water and formula going forward and on the pull back, the squeegee will leave the floor essentially dry and ready to walk on.

Caution:

Do not over wet the floor. Apply formula by depressing the spray trigger on the forward stroke only and release the spray trigger on the rearward stroke. Over wetting the floor surface may cause delamination of certain laminated flooring materials.

Dirty tank is full

While wet cleaning, you will see dirty water collected in the dirty tank. When the tank is full, the white float in the dirty tank will rise to the top, making a noticeable sound to let you know it is time to empty the dirty tank.

Emptying the dirty tank

Remove the dirty tank lid. Dump the dirty water and debris into the sink, toilet, laundry tub or outside. Rinse the tank out with warm water and replace it in the unit.

Tip:

To extend the life of your filter and to maintain maximum dry suction, check the filter for lint and debris frequently.

Tip:

To make sure water and formula are flowing, squeeze the spray trigger without the Gentle Clean™ Brush or pad inserted. You should see a light stream of water and formula dispensed onto the floor.

Tip:

While using the Flip-It in the wet cleaning mode, make sure to listen for the change in the sound to alert you when the dirty tank is full.

Tip:

If there are large pieces of debris in the water, you may not want to empty the tank into your sink.

w w w . b i s s e l l . c o m

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents E R ’ S G U I D E Mark J. Bissell President and Chief Executive Officer Thank you for buying a Bissell Flip-ItDo not carry the appliance while in use Use indoors only Do not leave FLIP-ITwhen it is pluggedIf your appliance is fitted with a nonrewireable BS Do not use with damaged cord or plugBrush & Pad Gentle Clean Pad is intended for use Product featuresBody of the unit Getting ready Cleaning formula sectionFilling the clean tank Remove the clean tank from the machineEmptying the dirty tank Flipping from dry to wet cleaningWet cleaning/vacuuming Dirty tank is fullChecking the filter Removing wet cleaning nozzleGentle Clean Brush Gentle Clean PadPossible causes Remedies Water & formula are draining out from the clean tankNo suction Water is not flowingFor UK inquiries Bissell Consumer ServicesMonday Thursday Part Name Replacement parts Bissell Flip-ItWarranty Bissell Flip-It Limited Two Year Warranty
Related manuals
Manual 12 pages 52.06 Kb

5200 specifications

The Bissell 5200 is a versatile and powerful carpet cleaner designed to effectively eliminate tough stains and dirt from a variety of surfaces. This machine showcases a blend of innovative features and advanced technologies that enhance its performance, making it a favorite among homeowners and cleaning professionals alike.

One of the standout features of the Bissell 5200 is its dual-tank system, which separates clean water from dirty water. This design ensures that users are always applying clean solution to their carpets while keeping dirt and debris contained. The clean water tank has a generous capacity, allowing for more extended cleaning sessions without the need for frequent refills.

Additionally, the Bissell 5200 is equipped with a powerful motor that delivers strong suction capabilities. This feature not only helps lift and remove embedded dirt but also expedites the drying time of carpets, reducing the risk of mold and mildew. The machine’s brush system includes rotating brushes that work deep into carpet fibers, agitating dirt and stains for a thorough clean.

Another notable technology integrated into the Bissell 5200 is its Heatwave Technology. This feature maintains the temperature of the water and cleaning solution throughout the cleaning process, enhancing the effectiveness of the cleaning. Warm water helps to break down stubborn stains more effectively, leading to brighter and fresher carpets.

The ease of use is another hallmark of the Bissell 5200. Its lightweight design and ergonomic handle make it easy to maneuver around furniture and hard-to-reach areas. Additionally, the machine comes with various attachments, including a handheld nozzle and upholstery tool, which are ideal for tackling stairs, upholstery, and even in cars.

For added convenience, the Bissell 5200 also features an easy-to-empty dirty water tank and a washable filter, ensuring that maintenance is minimal and straightforward. Its user-friendly controls and compact design also contribute to the overall practicality of this carpet cleaner.

In summary, the Bissell 5200 stands out for its powerful cleaning capabilities, innovative technologies like Heatwave Technology, and user-friendly features. Whether dealing with pet stains, high-traffic areas, or routine cleanings, the Bissell 5200 is an effective tool for achieving a cleaner and healthier home environment.
Top Page Image Contents