Assembly
Your Steam Mop assembles quickly and easily. The only thing you will need for assembly is a Phillips head screwdriver.
Handle Assembly
Your Steam Mop is packaged with the following items:
Handle Assembly
Lower Body with Water Filter Maneuverable Swivel Head Removable Water Tank
1 large Phillips Head Screw taped to the handle
Lower Body
Large Screw
Small Screw
1 small Phillips Head Screw taped to the handle
2 Microfiber Mop Pads
1.Attach lower body to maneuverable swivel head.
2. Secure maneuverable swivel head with small Phillips head screw. Tighten until secure.
3.Slide handle assembly down into lower body until it will go no further.
4.Secure the handle by placing the large Phillips head screw through the screw opening in the lower body and into the rear of the handle assembly. Tighten with screwdriver until secure.
5.Slide water tank onto lower body by lining up vertical glides and gently sliding tank into place.
Steam Mop assembly is now complete.
Maneuverable Swivel Head
Removable | 2 Microfiber Mop Pads |
| |
Water Tank |
|
12
34
5
5
w w w . b i s s e l l . c o m