Castors model sc165 optIonal, FIllIng, Safety cut-out

castors (model sc165 optIonal)

The castors are packed separately. Turn the boiler upside down and insert the 3 castors. These should be pushed in hard until they stop. Once installed these remain in place permanently.

fIllIng

sc75 (see Fig.1)

Remove elbow filler cap and fill unit to Max. level indicator with clean - preferably hot water.

Ensure that the ‘O’ ring is seated correctly on the elbow filler cap and place elbow filler cap lugs into filler hole with the tongue pointing to the TWO O’CLOCK position. Turn the elbow filler cap clockwise to the SIX O’CLOCK position so that the tongue locks into place between the two teeth.

sc77, sc125 & sc165 (see Fig.2)

Remove filler cap and fill unit to Max. level line or indicator with clean - preferably hot water. Replace filler cap.

Fig.1

SC75

Fig.2

SC77, SC125, SC165

do not overfill the unit or hot water will be forced up the steam hose. Screw hose onto threaded outlets of boiler and accessory, hand tight is sufficient. do not over tighten but do check for hand tight fit from time to time during use.

Connect mains lead from unit to power socket and switch on. It can take approx 20 mins before steam is produced - depending on fill water quantity and temperature.

do not leave unattended and keep children & pets out of the room.

Just before full steam production a small amount of bubbling and water will occur at the accessory. beware of hot water discharge prior to steam emission.

If the unit requires refilling, unplug and allow to cool for at least 2 minutes before removing filler cap - Beware of steam - and re-filling. When finished, allow to cool completely and empty unit. Always store unit empty.

safety cut-out

A safety cut-out is fitted to prevent overheating of the element if water boils below the Min. level.

If unit stops boiling during use this may be the cause. Wait for 2 minutes before removing filler cap then re-fill with water. The cut-out will self reset and steam be produced again within 20 minutes.

the cut-out will not protect the element if a part filled unit is tilted during use in a way which enables part of the element to be out of the water for longer than 15-20 seconds.

changIng tools

Never remove the hose or change tools when the unit is plugged in. Wait 2 minutes after unplugging before changing tools. Screw the nut, which is on the end of the steam hose, onto the outlet of the tool - hand tight only.

SC77 specifications

The Earlex SC77 is a versatile and powerful steam wallpaper stripper designed to facilitate the removal of wallpapers in a quick and efficient manner. It’s an essential tool for homeowners, decorators, and DIY enthusiasts who want to update their interiors without the tedious process of scraping off old wallpaper manually.

One of the main features of the Earlex SC77 is its advanced steam technology. The unit operates by heating water to produce steam that penetrates the wallpaper, loosening the adhesive and making it easier to peel off. This steam action not only speeds up the removal process but also minimizes the risk of damaging the underlying plaster or paint, preserving the integrity of the wall surface.

The Earlex SC77 boasts a powerful 1500-watt heating element, which allows it to produce steam in just 12 minutes. This rapid heating time ensures that users can start their wallpaper removal tasks without lengthy delays. The unit comes equipped with a large 5-liter water tank, providing prolonged operation. This means that users can work on larger sections of wallpaper without needing to stop frequently to refill the tank, leading to greater efficiency in bigger jobs.

The SC77 includes a variety of accessories that enhance its usability. It comes with different steam plates designed to accommodate various wallpaper textures and substrates. For instance, the small steam plate is ideal for intricate areas like corners and edges, while the large steam plate works effectively on larger wall sections. Additionally, the unit features a safety cap that prevents accidental opening during operation, offering peace of mind.

Portability is another key characteristic of the Earlex SC77. The built-in handle and lightweight design make it easy to transport from one job to another. This is particularly beneficial for professional decorators who need to move their equipment frequently.

Moreover, the SC77 is designed with user convenience in mind. The long power cord and steam hose provide flexibility and adaptability, allowing users to maneuver around furniture and other obstacles in the room.

Overall, the Earlex SC77 steam wallpaper stripper is a highly effective tool that combines powerful steam technology with user-friendly features. It ensures a smooth and efficient wallpaper removal process, making it a must-have for anyone looking to refresh their living spaces.