Grounding Instructions

This appliance must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

DANGER

Improper connection of an equipment-grounding conductor can result in risk of electric shock. Check with a qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the appliance. If it will not fit the outlet, have the proper outlet installed by a qualified technician.

This appliance is for use on a nominal 120 volt circuit and has a grounding plug that looks like the plug illustrated in Figure A. A temporary adapter which looks like the adapter illustrated in Figure B may be used to connect this plug to a two-pole receptacle, as shown, if a properly grounded outlet is not available.The temporary adapter should be used only until a properly grounded outlet, Figure A, can be installed by a qualified electrician.The green colored rigid ear, lug, or the like extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is used, it must be held in place by a metal screw.

NOTE: In Canada, the use of a temporary adapter is not permitted by the Canadian Electrical Code.

INSTRUCTIONS VISANT LA MISE À TERRE

Cet appareil doit être mis à la terre. En cas défaillance ou de panne éventuelles, la mise à la terre fournit au courant un che min de moindre résistance qui réduit le risque de choc électrique. Cet appareil est pourvu d’un cordon muni d’un conducteur de terre et d’une fiche avec broche de terre. La fiche doit être branchée dans une prise appropriée correctement installée et mise à la terre conformément aux règlements et ordonnances municipaux.

AVERTISSEMENT

Un conducteur de terre mal raccordé peut entraîner un risque de choc électrique. Consulter un électricien ou un technicien d’entretien qualifié si vous n’êtes pas certain que la prise est correctement mise à la terre. Ne pas modifier la fiche fournie avec l’appareil-si elle ne eput être insérée dans la prise, faire installer une prise adéquate par un électricien qualifié.

Note. Au Canada, l’utilisation d’un adaptateur temporaire n’est pas autorisée par le Code canadien de l’électricité.

Cet appareil est destiné à un circuit de 120V et est muni d’une fiche de mise à la terre semblable à celle illustrée par le Fig ure A. S’assurer que l’appareil est branché à une prise de courant ayant la même configuration que la fiche. Aucun adaptateur ne devrait être utilisé avec cet appareil.

Grounded Outlet Box	Adapter	Grounded Outlet Box
Boîte de Prise de Terre	Adaptateur	Boîte de Prise de Terre

Grounding Blade is

Longest of the Three

Blades

La Lame de Terre Est	Metal Screw
La Plus Longue Des		Grounding Tab
	Vis de Métal
Trois Lames
	Figure A	Taquet de Terre

		Figure B

2500 specifications

Eureka 2500 is an innovative and advanced technological solution designed to enhance productivity in various sectors, including manufacturing, logistics, and service industries. Built upon a robust platform, this versatile machine integrates cutting-edge features and technologies to facilitate seamless operations and improve efficiency.

One of the standout characteristics of the Eureka 2500 is its powerful processing capability. Equipped with a high-performance processor, it can handle complex tasks with speed and precision, making it suitable for environments that demand quick decision-making and timely execution. The large memory capacity allows for the simultaneous management of multiple applications, ensuring that users can execute several operations without experiencing lag.

In addition to its processing power, the Eureka 2500 incorporates state-of-the-art automation technologies. Automation not only streamlines workflows but also reduces the margin of error, thereby enhancing overall productivity. The machine's ability to work autonomously on repetitive tasks frees up human resources for more strategic activities, leading to increased value generation within organizations.

The user interface of the Eureka 2500 is designed for ease of use, featuring an intuitive touch display that simplifies interaction. Users can quickly access and navigate through various functionalities, making it accessible to personnel regardless of their technological proficiency. Furthermore, its customizable settings allow organizations to tailor the machine to fit their specific operational needs, promoting adaptability in dynamic work environments.

Connectivity is another significant advantage of the Eureka 2500. With built-in Wi-Fi and Bluetooth capabilities, the machine can easily integrate into existing networks. This connectivity enables real-time data monitoring and analytics, allowing organizations to track performance metrics and make data-driven decisions. The ability to communicate with other devices and systems enhances ecosystem compatibility, ensuring that the Eureka 2500 fits seamlessly into the broader technological landscape of any business.

In terms of durability, the Eureka 2500 is constructed from high-quality materials designed to withstand the rigors of a demanding operational environment. Its energy-efficient technologies not only reduce operational costs but also promote sustainability, making it an appealing choice for environmentally conscious organizations.

Overall, the Eureka 2500 stands out as a comprehensive solution that combines advanced processing power, automation capabilities, user-friendly design, connectivity features, and durability. This positions it as a valuable asset for any organization looking to enhance productivity and streamline operations in today's fast-paced industrial landscape.