USING AS A STEAM CLEANER
Using Your Accessories
Attaching the extension tubes (#10) to the Flexible Grip (with On/Off Steam Control) and to the other accessories.
To insert the extension pipes (#10) one in the other, in the flexible grip and in the attachments, press the knob ensuring that it fits into the hole. To disconnect, repeat this operation by pressing the knob and pulling on the two parts.
Flexible Grip
Extension Tubes (#10)
Note: The angle adapter (#12) (fig. 1) is already attached to the rectangular brush (#11) Fig. 2
Fig. 1
Fig. 2
Attaching the Angle Adapter
Attaching the Angle Adapter (#12) (fig. 1) to the rectangular brush (#11) (fig. 2).
Hold the brush with its bristles pointing down in your left hand. With the “Angle Adapter (#12) pointing downward, insert it into the hole in the back of the brush, then turn the “Angle Adapter”(#12) 180°.
Removing the Angle Adapter
To remove the “Angle Adapter” (#12) from the rectangular brush (#11), hold the brush with its bristles pointing down in your left hand. Turn the “Angle Adapter” (#12) 180° (pointing downward) and then pull.
7