Field Controls CW-HD-1 specifications Nominal Pipe Diameter

Page 5

PROPERLY WRAPPING THE ANTENNAE

The antenna wrap around the water pipe on each end of the ClearWave™ (see Figure 1). A minimum of seven fully wrapped coils of the antenna wire, with each coil wrapped tightly against the pipe and pressed snugly against each other is required for best results (see Figure 3). The operation of the ClearWave™ and the antenna installation is not based on direction of water flow, but one antenna MUST be wrapped in a clockwise direction and the other wrapped in a anti- clockwise direction.

1. First, wrap the antenna onto the water pipe by securing the right antenna to the

 

water pipe next to the ClearWave™ housing with a wire tie. Wrap the right

 

antenna clockwise (over the top of the pipe first), keeping the antenna wire tight

 

against the pipe and the preceding coil. Secure the end of the right antenna

Figure 3

wire to the water pipe with a wire tie (see Figure 3).

 

2.Wrap the left antenna onto the water pipe by securing the antenna to the water pipe next to the ClearWave™ housing with a wire tie. Wrap the left antenna counter clockwise (Under the bottom of the pipe first), keeping the antenna wire tight against the pipe and the preceding coil. Secure the end of the left antenna wire to the water pipe with a wire tie.

3.When energized, the ClearWave™ modulation indicator lights start flashing sequentially indicating that the ClearWave™ is functioning properly. If the indicator lights do not flash sequentially, unplug the power supply, wait one minute then plug in the power supply again. If at any time a functional problem is suspected, unplug the power supply, wait one minute then plug in the power supply again.

NOTE: The performance of the ClearWave™ is not affected by the direction or orientation of the unit. The unit may be mounted to horizontal, vertical, or diagonally. The ClearWave™ can be used effectively on any type of water pipe; galvanized, copper, or plastic.

NOTE: The ClearWave™ is designed and tested to cause little or no interference to other communication devices, such as televisions, and most cordless telephones. Install the ClearWave™ at least ten feet from any radio, television, or cordless telephone base unit to eliminate possible interference.

MAXIMUM WATER CONDITIONING CAPACITY FOR NOMINAL PIPE DIAMETERS

 

Nominal Pipe

 

 

1/2”

 

 

3/4”

 

 

1”

 

 

1-1/4”

 

 

1-1/2”

 

 

Diameter

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

# of Units Req.

 

1

 

1

 

1

 

2

 

2

 

 

GPM Flow

 

7

 

16

 

28

 

45

 

61

 

Page 5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents CLEARWAVE Water Conditioner Power Specifications 18 VAC, 5 Watts,.09 AmpsMagnets HOW IT WorksElectrostatic Devices ClearWaveWater Hardness Testing for Hardness and Iron LevelsHigh Iron Concentration Installation Nominal Pipe Diameter DAY 5 and onwards Operation Timetable for the ClearwaveDAY 16 and onwards After 1 to 2 monthsPage ClearWave Warranty Registration

CW-HD-1 specifications

The Field Controls CW-HD-1 is a cutting-edge air treatment product designed to enhance indoor air quality in residential and commercial settings. This high-efficiency device incorporates advanced technologies to deliver effective performance, making it an essential addition to modern HVAC systems.

One of the standout features of the CW-HD-1 is its compatibility with multiple HVAC systems, including central heating and cooling units, as well as standalone air handlers. This versatility allows it to be integrated seamlessly into existing systems, providing a boost in air quality without the need for extensive modifications.

The CW-HD-1 utilizes a two-stage filtration process that includes a HEPA filter and activated carbon filter. The HEPA filter captures 99.97% of airborne particles as small as 0.3 microns, effectively removing dust, pollen, pet dander, and other allergens from the air. The activated carbon filter plays a crucial role in eliminating odors and harmful volatile organic compounds (VOCs), ensuring that the air is not only clean but also fresh-smelling.

In addition to its filtration capabilities, the CW-HD-1 features a built-in UV-C light, which further enhances its air purification abilities. The UV-C light helps to neutralize bacteria, viruses, and mold spores that may be present in the air, providing an additional layer of protection for occupants. This technology is particularly beneficial for environments where air quality is critical, such as healthcare facilities and homes with individuals who have respiratory issues.

The CW-HD-1 is designed with user convenience in mind. It includes an intuitive control panel that allows users to monitor filter status and airflow settings easily. Additionally, its compact design makes installation straightforward, requiring minimal space within the HVAC system.

Durability is another key characteristic of the CW-HD-1. Constructed from high-quality materials, it is designed to withstand the rigors of everyday use while maintaining optimal performance over time. Regular maintenance is also user-friendly, with filters that can be easily accessed and replaced when necessary.

Overall, the Field Controls CW-HD-1 is an innovative solution for improving indoor air quality. With its advanced filtration technologies, integrated UV-C light, and user-friendly design, it stands out as a reliable choice for anyone looking to enhance the air they breathe. By investing in a CW-HD-1, homeowners and businesses alike can ensure a healthier, safer indoor environment for their families and employees.
Top Page Image Contents