Harman-Kardon AVR 260 owner manual REAR-PANEL Connections

REAR-PANEL CONNECTIONS

	� � � � �		�	�
�	� � � � �	�	� � �	�	�

�

�� �

�

� � � � � � � �� � � � � � �

NOTE: To assist in making the	Front Left:	White	Surround Back Left:	Brown	Component Video “Y”: ...	Green
correct connections for multichannel	Front Right:	Red	Surround Back Right:	Tan	Component Video “Pr”:	Red
input/output and speaker
	Center:	Green	Subwoofer (LFE):	Purple	Component Video “Pb”: . Blue
connections, all connection jacks
and terminals have been color coded	Surround Left:	Blue	Digital Audio:	Orange
in conformance with the latest CEA	Surround Right:	Gray	Composite Video:	Yellow
standards as follows:

0AM Antenna: Connect the AM loop antenna supplied with the receiver to these terminals. If an external AM antenna is used, make connections to the AM and GND terminals in accordance with the instructions supplied with the antenna.

1FM Antenna: Connect the supplied indoor or an optional external FM antenna to this terminal.

2Analog 2 IN: Connect these jacks to the PLAY/OUT audio jacks on any audio or video source.

3Analog 2 OUT: Connect these jacks to the REC/IN audio jacks on any audio or video source.

4Subwoofer Output: Connect this jack to the line-level input of a powered subwoofer. If an external subwoofer amplifier is used, connect this jack to the subwoofer amplifier input.

5Analog 5 IN: Connect these jacks to the PLAY/OUT audio jacks on any audio or video source.

6Analog 1 IN: Connect these jacks to the PLAY/OUT audio jacks on any audio or video source.

7Analog 4 OUT: Connect these jacks to the REC/IN audio jacks on any audio or video source.

8Stereo Jack IN: This input is an extra Audio Input, where you can connect any device with a stereo mini-jack such as an MP3-player or portable CD player from its headphone output jack or line out jack.

98-Channel Direct Inputs: These jacks are used for connection to source devices such as DVD-Audio, Blu-ray, HD-DVD or SACD players with discrete analog outputs. Depending on the source device in use, all eight jacks may be used, though in many cases only connections to the front left/right, center, surround left/right and LFE (subwoofer input) jacks will be used for standard 5.1 audio signals.

ADigital Audio Output: Connect this jack to the matching digital input connector on a digital recorder such as a CD-R or MiniDisc recorder.

BVideo Monitor Outputs: Connect these jacks to the composite and/or S-Video input of a TV monitor or video projector to view the on-screen menus and the output of any standard Video or S-Video source selected by the receiver’s video switcher.

8