Everpure CB20-124E manual Replacement Cartridge, System Installations, CC1E Carbon Filter

Page 1

Part Number EV9100-51

INSTALLATION AND OPERATING INSTRUCTIONS

CB20-124E FILTRATION SYSTEM

GENERAL PRECAUTIONS

SYSTEM INSTALLATIONS

Maximum Pressure: 20-100 psi non-stock (1.4-6.9 bar)

Temperature: 35-100°F (2-38°C)

Install On Cold Water Lines Only

Installation By a Certified Installer Is Recommended

Housing Inlet & Outlet: 3/4"

Rated service flow: 5 gpm (19 Lpm)

Do not install where unit is exposed to direct sunlight.

Allow a minimum of 4" clearance under the filter to facilitate cartridge change. Make certain that the installation complies with all state and local laws and regulations.

WARNING: This filter must be protected from freezing. Failure to do so may result in cracking of the filter and water leakage.

CB20-124E FILTRATION SYSTEM

714"

 

3/4" Outlet

3/4" Inlet

Connection

to Equipment

Connection

 

from Supply

 

 

2534"

Mounting Depth: 8.5"

Operating Weight: 30 lbs.

Allow a minimum of 4" clearance under the filter to facilitate cartridge change.

NOTE: Always use a good grade of pipe sealant or teflon® tape on connections.

1.Reduce product weight by removing bowl from header assembly before mounting unit.

2.Determine installation location using head assembly.

3.Assemble By-Pass, if using and install to head.

4.Install system brackets. Mount system.

5.Turn off water and power supply to all beverage equipment and icemaker.

6.Connect cartridge system to feed water supply, beverage sys- tems, and icemaker.

7.Sanitize filter bowls using dilute (0.5%) household bleach solution, Diversol™ or equivalent.

8.Handle cartridges by plastic wrap to minimize contact.

9.Lubricate “O-rings” with silicone lubricant and secure to system head. Hand tighten.

10.Cartridge Change and Flush Procedure:

Insert the fresh cartridge into the clean bowl and screw the bowl into the head, hand tight only. Turn on water and flush cartridge for 15 minutes.

11.Close flushing valve and inspect for leaks.

12.Turn power to beverage equipment and icemaker back on.

13.Clean up and give final inspection.

14.Obtain Manager sign-off on work confirmation form.

REPLACEMENT CARTRIDGE

CC1E Carbon Filter

Replace cartridge when capacity is reached or pressure drops below

15 psi, but at least every 6 months.

1.Turn power off to beverage equipment.

2.Turn water off to CB20-124E system.

3.Unscrew bowl assembly from header, remove exhausted cartridge and discard. CAUTION: Bowl is heavy with water.

4.Unwrap new cartridge and place in bowl. Screw bowl into appro- priate head on system.

5.Turn on water and flush cartridge for 15 minutes.

For assistance or to find the nearest dealer for replacement parts call:

Everpure Customer Service

1-800-323-7873

Everpure Technical Service

1-800-942-1153

System Tested and Certified by NSF International against NSF/ANSI Standard 42 for the aesthetic reduction of Chlorine Taste and Odor and Chloramine Reduction.

Image 1
Contents System Installations Replacement CartridgeHousing Inlet & Outlet 3/4 Rated service flow 5 gpm 19 Lpm CC1E Carbon FilterOperating Specifications FeaturesPerformance Data Aesthetic Performance Certified by NSF/ANSI

CB20-124E specifications

The Everpure CB20-124E is a top-tier water filtration system designed for commercial applications, ensuring the highest quality of water for a variety of settings, including restaurants, cafes, and other foodservice establishments. This system is particularly known for its exceptional ability to reduce contaminants, protecting equipment and enhancing the taste of beverages and food products.

One of the standout features of the Everpure CB20-124E is its proprietary Micro-Pure technology. This innovative filtration mechanism employs a blend of activated carbon and advanced filtration media, which effectively reduces common waterborne impurities such as chlorine, sediment, and other undesirable tastes and odors. The result is not only cleaner water but also improved flavor in coffee, tea, and other beverages, making it an ideal choice for establishments that prioritize quality.

The CB20-124E filter also boasts a high flow rate, allowing it to support demanding commercial applications without sacrificing water quality. This makes it suitable for high-volume environments, ensuring that businesses can serve their customers efficiently without delays caused by filtration issues.

An added advantage of the Everpure CB20-124E is its design, which incorporates a built-in scale inhibitor. This feature helps to prevent limescale buildup in equipment, such as coffee machines and ice makers. By minimizing scale deposits, the filter helps extend the lifespan of costly equipment and reduces maintenance costs, making it a cost-effective solution for operators.

Installation and maintenance are also simplified with the Everpure CB20-124E system. The filter features a user-friendly design, allowing for quick and straightforward cartridge changes without the need for specialized tools. This means less downtime for businesses and a more efficient workflow in busy commercial environments.

Durability is another characteristic of the Everpure CB20-124E. Constructed with high-quality materials, the filter is designed to withstand the rigorous demands of commercial use, ensuring long-lasting performance.

In conclusion, the Everpure CB20-124E is a robust and efficient water filtration solution that meets the rigorous demands of commercial settings. With its advanced filtration technology, high flow rate, protective features, and user-friendly design, it stands as a reliable choice for any business looking to enhance water quality and operational efficiency.