Brother XC6771-021, XL-3510 Appliqués, Monogramming Embroidering, Stitch Width, Zigzag Stitch Any

Page 41

XL2600.book Page 39 Thursday, November 4, 2004 9:46 PM

Appliqués

Stitch Name

Pattern

Stitch Length

Stitch Width

[mm (inch)]

[mm (inch)]

Zigzag Stitch

 

F-2

Any

 

(1/64-1/16)

 

 

 

 

 

 

 

You can create an applique by cutting a different piece of fabric into a shape and using it as a decoration.

1Baste the cut design to the fabric.

2Carefully sew around the edge of the design with a zigzag stitch.

3Cutstitching.away any fabric that is left outside the

4Remove the basting, if necessary.

Memo

Make reinforcing straight stitches at the beginning and the end of the zigzag stitching.

CAUTION

Be careful that the needle does not hit a pin during sewing. The needle could break, and you may be injured.

Monogramming and

Embroidering

 

 

Stitch

Stitch

 

 

Stitch

Pattern

Length

Width

Foot

Other

Name

[mm

[mm

 

 

(inch)]

(inch)]

 

 

Zigzag

 

Any

Any

None

Darning

Stitch

 

 

 

 

Plate

 

 

 

 

 

 

Preparing for Monogramming and Embroidering

1Remove the power supply plug from the outlet. Place the darning plate on the needle plate, and reconnect the power supply plug to the wall outlet.

2Set the pattern selection dial to Zigzag Stitch.

5

3Draw the lettering (for monogramming) or design (for embroidering) on the surface of the fabric.

4Stretch the fabric between embroidery hoops as firmly as possible, with the underside of the fabric on the bottom of the inside hoop.

5Put the work under the needle and lower the presser bar with the foot removed.

6Pull the lower thread up through the starting position by turning the handwheel and make a few holding stitches.

39

Image 41
Contents Appendix Important Safety Instructions For Users in the UK, EIRE, Malta and Cyprus only Please Read These Instructions Before YOU USE the Machine UNPACKING/REPACKING InstructionsContents Using Attachments and Applications Main Parts Knowing Your Sewing MachineOptional Accessories AccessoriesConnecting Plugs Using Your Sewing MachineFoot Controller Main Power and Sewing Light SwitchChecking the Needle Replacing the NeedleTouches the stopper, and securely tighten Changing the Presser FootFlat Bed Attachment Using a Free-arm Style1Slideopen theit. flat bed attachment to the left to 1Slide the flat bed attachment to the left to release itStitches ControlsPattern Selection Dial Pattern Recommended Patterns and Stitch NamesInstruction Width3/16 Fixed 3/32 Stitch Length Dial Stitch Width Dial Stretch StitchingReverse Sewing Lever Stitches Selecting a Stretch StitchWinding the Bobbin Threading the MachineWound evenly Wound poorly Lower Threading Lower Threading for models equipped with a quick-set bobbin Follow steps 1 and 2 from Lower Threading Pullon thisup pin.the spool pin and put a spool of thread Raise the presser foot using the presser foot leverUpper Threading 6Putneedle.the thread behind the guide above Hook Thread Sewing with a Twin Needle Drawing up the Lower ThreadThread Tension Size FABRIC, THREAD, and Needle CombinationsFabric Type Thread Size of Needle Straight Stitching Please Read Before SewingPattern Fixed 16-0Stitch Stitch Name Zigzag StitchingZigzag Stitch Zigzag StitchShell Tuck Stitching Blind Hem StitchingStitch 1Bothfabric.threads should be the same color as4Sew at a slow speed Elastic StitchingPatchworking Double Action StitchingOveredge Stitching StitchTriple Zigzag Stretch Stitching Feather StitchingDecorative Stitching Pattern Making a ButtonholeStitch Pattern Adjusting Buttonholes Sewing Buttons Center Zipper InsertionWidth Foot Darning GatheringOther AnyMonogramming Embroidering AppliquésStitch Width Zigzag Stitch AnyKeep fingers away from moving parts, especially needles Using the Walking Foot Optional AccessoriesStitch Plate Using the Quilting FootMachine’s sewing speed. Sew while moving the fabric slowly Using the 1/4-inch Quilting Foot16-3/32 Quickly Stitch Together a QuiltCleaning MaintenanceChanging the Light Bulb Put the light cover back on and fasten the screw0Install the needle plate cover Symptom Possible cause How to put it right Reference TroubleshootingOr breaks LowerThread ten Fabric isSkipped Stitches areThere is a high Pitched noise While sewingNumerics Index

XC6771-021, XL-2620, XL-3510 specifications

The Brother XL-3510, XL-2620, and XC6771-021 are popular sewing machines that cater to a wide range of sewing enthusiasts, from beginners to more experienced users. Each model brings unique features and technologies, making them excellent choices depending on the specific needs of the user.

The Brother XL-3510 is renowned for its versatility and user-friendly design. This machine comes equipped with 35 built-in stitches, including essential, decorative, and heirloom stitches, giving users the flexibility to tackle a variety of projects. Its easy-to-use stitch selector allows crafters to switch between stitch types effortlessly. This model also features a one-step buttonhole function, enabling even novices to create professional-looking buttonholes with ease. Additionally, an automatic needle threader simplifies setup, reducing frustration and saving time. The free arm design facilitates sewing cuffs, collars, and other hard-to-reach areas, making it an excellent option for clothing alterations.

On the other hand, the Brother XL-2620 is another solid choice for those eager to explore their sewing capabilities. This model boasts 26 built-in stitches, including stretch stitches for knit fabrics. An easy bobbin winding system and automatic needle threader enhance convenience and efficiency. The XL-2620 also includes a four-step buttonhole feature that provides users with precise and reliable buttonholes. The lightweight design and carrying handle make it portable, which is an asset for those who attend sewing classes or workshops.

The Brother XC6771-021 stands out for its advanced features, catering specifically to quilting and sewing enthusiasts. With the capability to work on various fabrics, this model supports quilting with a designated walking foot and an oversized extension table that provides ample workspace for larger projects. The XC6771-021 includes an impressive array of 60 built-in sewing stitches, including decorative appliqué and quilt stitches. The intuitive LCD display allows for easy navigation through stitching options, while the speed control feature enables users to adjust sewing speeds for precise control.

In summary, the Brother XL-3510, XL-2620, and XC6771-021 each have distinct advantages that appeal to different sewing needs. From beginners looking for simplicity to advanced users seeking specialized features, these machines are designed to enhance creativity and ease of use, making them valuable tools in any sewing room.