BAS-415 - Quick Reference Guide
For Technical Assistance Please Call
ENTERING DISK DATA & SETTING THE COLOR SEQUENCE
1. |
| Use BACK and FORWARD keys | ||
| to pick an empty memory location. | |||
2. | Insert floppy disk into disk drive | |||
3. | ENTER | Press ENTER. | ||
| ||||
4. |
| Press UP or DOWN arrow to begin | ||
| reading the disk. | |||
5. |
| Press UP or DOWN arrows to scroll | ||
| the disk directory. | |||
|
| * | Press (*) key to read | |
|
| the design name. | ||
6. | ENTER | Press ENTER to copy the design to | ||
the machine memory. | ||||
| ||||
7. | START | Press START to calculate design | ||
size and number of color changes. | ||||
| ||||
8. | NEEDLE | Press NEEDLE SET to enter | ||
SET | color programming mode. | |||
9. |
| Press UP or Down arrow keys to | ||
| assign needle number (Color). | |||
|
|
| A = Needle Number 10 | |
|
|
| B = Needle Number 11 | |
|
|
| C = Needle Number 12 | |
10. | Press FORWARD arrow to select | |||
next color of design or BACK arrow |
for previous color of design.
11. | END | Press END to exit needle set mode. |
| ||
|
|
ENTER A DESIGN FROM EDITOR MODE
| Use BACK and FORWARD keys |
| to pick an empty memory location. |
ENTER | Press ENTER. |
#Press the (#) key until “EDITOR” appears on the screen.
Press UP or DOWN arrows to begin reading computer directory.
ENTER | Press ENTER to copy the design to | |
the machine memory. | ||
| ||
START | Press START to calculate design | |
size and number of color changes. | ||
|
Program color sequence (see Step 8)
Use ARROW keys to center your design (see Step 12)
Press (#) key to trace the mask of the design (see Step 13)
Press START to start sewing (see Step 14)
ENTER A DESIGN FROM THE MACHINE MEMORY
| Use BACK and FORWARD keys |
| to pick a design from memory. |
ENTER | Press ENTER to view design name |
START | Press START to calculate design | |
size and number of color changes. | ||
| ||
Program color sequence (see Step 8) |
12.
13.
14.
#
START
Use ARROW keys to center your design in the frame.
Press (#) key to trace the mask (outside edge) of the design.
Press START to start sewing.
Use ARROW keys to center your design (see Step 12)
Press (#) key to trace the mask of the design (see Step 13)
Press START to start sewing (see Step 14)