Brother PE 300S operation manual Important Safety Instructions

Page 2

“IMPORTANT SAFETY INSTRUCTIONS”

When using a sewing machine, basic safety precautions should always be taken,

including the following:

“Read all instructions before using.”

DANGER –To reduce the risk of electric shock.

1.The sewing machine should never be left unattended while plugged in. Always unplug the sewing ma- chine from the electrical outlet immediately after using and before cleaning.

2.Always unplug before changing the light bulb. Replace bulb with same type rated 8V 2.4 watts.

WARNING –To reduce the risk of burns, fire, electric shock, or injury to persons.

1.Do not allow this sewing machine to be used as a toy. Close attention is necessary when the sewing machine is used by or near children.

2.Use this sewing machine only for its intended use as described in this manual. Use only accessories recommended by the manufacturer as contained in this manual.

3.Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the sewing machine to the nearest authorized dealer or service center for examination, repair, electrical or mechanical adjustment.

4.Never operate the sewing machine with any air openings blocked. Keep ventilation openings of the sew- ing machine and foot control free from the accumulation of lint, dust, and loose cloth.

5.Never drop or insert any object into any opening.

6.Do not use outdoors.

7.Do not operate where aerosol (spray) products are being used or where oxygen is being administered.

8.To disconnect, turn the main switch to the symbol “O” position which represents off, then remove plug from outlet.

9.Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

10.Keep fingers away from all moving parts. Special care is required around the sewing machine needle.

11.Always use the proper needle plate. The wrong plate can cause the needle to break.

12.Do not use bent needles.

13.Do not pull or push fabric while stitching. It may deflect the needle causing it to break.

14.Switch the sewing machine to the symbol “O” position when making any adjustments in the needle area, such as threading needle, changing needle, threading bobbin, or changing presser foot, and the like.

15.Always unplug the sewing machine from the electrical outlet when removing covers, lubricating, or when making any other user servicing adjustments mentioned in the instruction manual.

16.This sewing machine is not intended for use by young children or infirm persons without supervision.

17.Young children should be supervised to ensure that they do not play with this sewing machine.

“SAVE THESE INSTRUCTIONS”

“This sewing machine is intended for

household use.”

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Operation MA N U a L Important Safety Instructions For Users in the UK, EIRE, Malta Cyprus only For repair or adjustment Please Read Before Using Your Sewing MachineFor a longer service life Congratulations on Choosing Brother Computer Sewing MachinePage Contents 107 100103 108Setting UP Principal PartsAir vents Card slot Power socketMain power switch Foot controller jackNet Other Included AccessoriesExtra spool pin and spool felt Options Part Name Part Code OthersSelection Keys Screen messages guide you through each operationUsing the operation buttons Operation ButtonsFree arm Basic Sewing Machine OperationFlat BED Extension Table Power Supply Insert the plug into a wall outlet Main power switchAbout the Screen Using the Screen KeysAdjusting the Brightness of the Screen Key to sharpen themTouch HOW to Change LanguageExample To change the display language to Spanish How to clear the language selection Out and pushed toward the back of the sewing machine Bobbin Winding / Bobbin Thread SettingTurn the power on Operation Machine Push the bobbin shaft to the left. Remove the bobbin Setting the bobbin Raise the presser foot using the presser foot lever Upper ThreadingThreading the take-up lever Thread take-up lever With your left handRun the thread all the way through the thread guides HOW to USE the Automatic Needle Threader Run thread through the guide above the needleFoot controller Starting and Stopping SewingSTART/STOP button Press Key Stitch Selection Utility StitchesStitches Trial Sewing Contents Stitch Width and Stitch Length Adjusting the stitch widthAdjusting the stitch length Stitch width mm inch Stitch length mm inch Auto ManualFagoting Non-adjustablePatchwork stitch Triple zigzagTightening the upper thread tension Thread TensionCorrect tension Loosening the upper thread tensionPresser Foot Changing the presser footChanging the Embroidery foot and the zipper foot Embroidery foot QFeed Dogs Needle Checking the needleNeedle size FABRIC/THREAD/NEEDLE Combination ChartThread Type SizeStraight Left Straight Middle Utility StitchesStraight Stitches Changing needle position Sewing cornersSewing thick fabric Sewing curvesSewing thick seams Using the free arm Sewing thin fabricTriple stitch Stretch Stitch and Triple StitchStretch stitch Stretch stitch Reinforced stitchAttach the applique using adhesive or basting, then sew it Overcasting using a zigzag stitchApplique using a zigzag stitch Zigzag StitchesUpper fabric Patchwork for crazy quiltSewing a curve with a zigzag stitch Lower fabricElastic zigzag Dotted ZigzagAttaching elastic bands Stretch elastic while sewing Elastic BandOvercasting Weight fabrics. Attach G foot. Keep foot guide along edgeOvercasting Ing For use on stretchable fabrics. Attach J foot. Keep foot onWhile sewing Blind hem stitch Blind HEM StitchesUse the on stretch fabrics and the for other fabrics If the needle does not catch the fold of hem enough If the needle catches the fold of hem too muchPass the thread underneath the presser foot Buttonhole StitchesButtonhole Reinforcement stitch Order of one cyclePin Lower the presser foot and start sewing Into the buttonhole seam buttonholes onlyTie it there Set the stitch width to match the diameter of the gimpBar tack BAR TackingUse for reinforcing the openings of pockets, etc Thick fabrics Applique Zig zag Fagoting AppliquesSewing the applique around corners FinishScallop ScallopPatchwork Stitch Patchwork stitchPreparations Zipper Insertion Centered and Side ApplicationCentered application Side application Embroidering Smocking Use to add a decorative touch to garmentsAttach button sew-on foot sold separately Select Button SewingOption Attaching buttons with four holes Before YOU Begin Carriage ConnectorEmbroidering Embroidery unit and memory cards optionalAttaching the embroidery unit Removing embroidery unit Choosing Embroidery Patterns Part One-point patterns Operation Machine Sew screen will appear BordersKey to go back to the previous screen Lettering Example For practice, try the word BUSPushing Key will take you to the Punctuation Number screens Numerals and punctuationLower and upper case letters Selecting patterns from a memory card To change size If you accidentally choose the wrong designIf you choose the wrong character Press the key to go back to the previous screenTo make words Stabilizers EmbroideringEmbroidering attractive finishes Thread and NeedleSetting the fabric into the embroidery frame Outer frame Fitting the embroidery frame to the embroidery unit Align the two pins on the embroidery unit frame holder withEmbroidery arm frame holder Stitching Pins Removing the embroidery frameEmbroidering Embroidering order for pattern parts Fabric and thread breakage Heavyweight fabrics denim, fleece, feltFabric Checking Thread Colors and Time Required Checking thread colorsChecking time required to complete a pattern Small hoop Optional Regular hoop Choosing Embroidery PlacementPress key to go to the edit screen Moving the embroidery location Checking the embroidering areaEmbroidering from a specific starting point Mirroring patterns Rotating and Mirroring PatternsRotating patterns RectionChanging Size and Stitch Density of Characters and Borders Multi-colored lettering Press key, then press keyIf the Thread Breaks During Embroidery If the upper thread breaksExample Continuing from a position within the second color When starting over from the beginningContinuing after the power shuts off Embroidery Applications Combining characters to form wordsOutline Embroidery Multi-color Single-color SewingEmbroidering appliques using a frame pattern Iron on to attach to fabric If you dont wish to use an iron Embroidering onto small pieces of fabric or onto cornersExample a You may attach by bastingFor example, to save the word one on page one MemorySaving groups of characters Restoring saved designs For example, to restore the word GirlPress key Pattern has been restored Cleaning the screen MaintenanceCleaning Cleaning the sewing machine surfaceRemove accumulated lint and thread from the inner shuttle Race with a brush or a vacuum cleanerCleaning brush Changing the Light Bulb Set the end cap Tighten the screw End cap ScrewBasic sewing machine maintenance TroubleshootingBefore Taking Your Machine in for Service Finding the Source of the Problem 27~29Embroidery unit does not work Needle breaksMachine does not start LCD touch screen is hard to readError Messages 104 This message is dis- played during bobbin winding AlarmsInstruction messages Sewing Chart Machine Programmed PatternsPatterns Programmed in Machine Utility stitches Character embroidering chartFrame pattern embroidering chart Sizes can be enlarged or reducedPatterns Memory Card ONE Point Mark Embroidery Pattern
Top Page Image Contents