Upgrading Your Machine’s Software
You can use a computer to download software upgrades for your sewing machine.
Visit our website at "http://solutions.brother.com" for notification of available updates.
Note
Be sure to download the upgrade file for this model from our web site. An upgrade file for any different model cannot be downloaded.
Refer to the Operation Manual for how to check the version of the sewing machine’s software.
Memo
The embroidery pattern which is saved in the sewing machine will not be deleted if you upgrade the software.
While the software is being upgraded, the buzzer will not sound when a key is pressed.
English
aWhile holding 
(Settings key) pressed, turn on the machine.
The following screen appears.
bPlug the USB cable connectors into the corresponding USB ports on the computer and on the machine.
The “Removable Disk” icon appears in “My Computer” on the computer.
cCopy the upgrade file to “Removable Disk”.
dWhen the screen shown in step a appears
again, press.
The message “Saving the upgrade file. Do not turn main power to OFF.” appears.
eWhen the following screen appears, upgrading is completed.
Note
If an error occurred, an error message appears. At this time, turn the machine off,
and then start the procedure again from step
a.
fDisconnect the USB cable, and turn the machine off, then on again.
The message “Connected to PC. Do not disconnect the USB cable.” appears.
5