Brother S-7200B operation manual Test operation Operating the treadle, Turning on the power

Page 19

3. INSTALLATION

3-5. Test operation (Operating the treadle)

CAUTION

Do not touch any of the moving parts or press any objects against the machine while sewing, as this may result in personal injury or damage to the machine.

2114M

3646M

3647M

3648M

1. Turning on the power

<Models with operation panel>

Press the ON power switch (1).

The power indicators (2) and (3) will illuminate.

NOTE: When turning the power switch on for the first time

The treadle and the operation panel will not operate for approximately four seconds after the power switch is turned on.

After approximately 4 seconds, “iniT rPM” (speed initialization) or “iniT ALL” (full initialization) will be displayed on the operation panel. After “iniT rPM” or “iniT ALL” is displayed, the treadle can be operated. (The operation panel will change to the stitch number display.) This message will not appear the second and subsequent times that the power switch is turned on.

<Models without operation panel>

Press the ON power switch (1).

The power indicators (3) and (4) will illuminate.

NOTE: When turning the power switch on for the first time

The treadle and control box panel cannot be operated for approximately 4 seconds after the power switch has been turned on.

After approximately 4 seconds, “Ar (All reset)” may appear in the stitch number display (5).

If this happens, turn the power switch off and then back on again. After that, normal treadle operation will then be possible.

2.Test operation

1.Check that the machine sews at low speed when the treadle (1) is gently pressed to position (B).

2.Then check that it sews at high speed when the treadle

(1)is gently pressed to position (C).

3.After pressing the treadle (1) forward, check that the needle is lowered to the top of the needle plate when the treadle (1) is returned to the neutral position (A). (when needle down stopping has been set.)

4.If the treadle (1) is pressed to position (D), thread trimming is carried out and the needle then rises above the needle plate and stops.

2117M

S-7200B

12

Page 18 Page 20
Image 19
Page 18 Page 20
Contents 7200B 7200B · · · · · Safety InstructionsEnvironmental requirements Sewing Direction of operation Contents Lower thread counter Convenient Function for Smooth SewingNames of Major Parts About the machine set-up location InstallationControl box Table processing diagramInstallation Connecting rodKnee lifter complying bar Power switchOil pan Rubber cushionsCotton stand Machine headOperation panel Models with operation panel Sticker RemoveKnee lifter plate Knee lifter adjustmentLubrication oil replenishment interval Lubrication -0,3 specificationsConnecting the cords Sewing machine cords Connecting the cordsOpening the control box cover Binding the cords Other cords Ground wireTest operation Operating the treadle Turning on the powerTest operation Preparation Before Sewing Installing the needleRemoving the bobbin case Winding the lower thread Installing the bobbin caseThreading the upper thread Adjusting the stitch lengthNames and functions Using the Operation Panel Basic OperationsFixed stitch key Sewing start and end backtack stitches Setting end backtack stitchesSewing SewingBacktacking Memo How to use the Document CD Contents of the Document CDRecommended system configuration for using the Document CD

S-7200B specifications

The Brother S-7200B is a top-tier sewing machine designed specifically for the industrial market, catering to the needs of professionals in apparel production and textile industries. This model is renowned for its advanced features, robust construction, and reliability, making it a preferred choice for manufacturers who prioritize speed and precision.

One of the standout features of the Brother S-7200B is its high-speed sewing capability. Operating at a remarkable speed of up to 5,500 stitches per minute, this machine allows for efficient mass production while maintaining high-quality stitching. This efficiency is essential in modern manufacturing environments where time is money.

The S-7200B incorporates advanced technologies that enhance its functionality. The machine is equipped with an automatic thread trimmer, which not only saves time during the sewing process but also ensures clean and professional finishes. The automatic lubrication system minimizes maintenance needs, allowing for prolonged use without frequent downtime.

Another significant characteristic of the S-7200B is its versatility in handling various fabrics. This machine excels in sewing lightweight to medium-weight materials, making it ideal for industries focused on garments such as shirts, blouses, and uniforms. Its adjustable stitch length and tension control allow operators to customize settings based on the fabric type, ensuring optimal stitch quality every time.

The Brother S-7200B also features a compact design, which is advantageous for crowded workspaces. Despite its robust capabilities, it doesn’t occupy excessive floor space, making it easier for manufacturers to integrate multiple machines into their operations without sacrificing efficiency.

In terms of user experience, the S-7200B comes with an ergonomic design that provides comfort during lengthy sewing sessions. The intuitive control panel allows for easy operation, even for those who may not be experienced in using industrial machines, making training new staff more manageable.

Overall, the Brother S-7200B stands out as a reliable and efficient sewing machine that meets the rigorous demands of industrial sewing. With its high-speed performance, versatile fabric handling, and user-friendly interface, it is an invaluable asset for any serious manufacturer looking to enhance productivity and ensure top-notch quality in their sewing processes.
Top Page Image Contents