Brother XL-5061, XL-5060, XL-5051, XL-5071, XL5050 For Users in the UK, EIRE, Malta and Cyprus only

Page 3

XL5000us.book Page 2 Tuesday, November 11, 2003 9:25 AM

———————————————————————————————————————————————————————————————

FOR USERS IN THE UK, EIRE, MALTA AND CYPRUS ONLY

If this machine is fitted with a three-pin non-rewireable BS plug then please read the following.

IMPORTANT (in the United Kingdom)

Main supply (AC 230/240V, 50Hz)

DO NOT cut off the main plug from the equipment. If the plug fitted is not suitable for the power outlet in your home or the cable is too short to reach a power outlet, then obtain an appropriate safety-approved extension lead or consult your dealer.

BE SURE to replace the fuse only with an identical approved type, as originally fitted, and to replace the fuse cover.

If the main plug is cut off, be sure to remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the main power supply.

IMPORTANT (in the other countries)

If the available socket outlet is not suitable for the plug supplied with this equipment, it should be cut off and an appropriate three-pin plug should be fitted. With alternative plugs, an approved fuse must be fitted in the plug.

NOTE: The plug severed from the main leads must be destroyed as a plug with bared flexible cords is hazardous if engaged in a live socket outlet. In the event that the plug fuse is replaced, use a fuse approved by ASTA to BS 1362,

i.e., carrying the mark, rated as marked on the plug.

Always replace the fuse cover. Never use plugs with the fuse cover omitted.

WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH THE LETTER ‘E’ OR BY THE

EARTH SYMBOL , OR COLORED GREEN OR GREEN AND YELLOW.

The wires in this main lead are colored in accordance with the following code:

Blue Neutral

Brown Live

As the colors of the wiring in the main lead of this appliance may not correspond with the colored markings identifying the terminals in your plug, proceed as follows:

The wire that is colored blue must be connected to the terminal marked with the letter ‘N’ or colored black or blue.

The wire that is colored brown must be connected to the terminal marked with the letter ‘L’ or colored red or brown.

CONNECTING PLUGS AND MAIN POWER/SEWING LIGHT SWITCH

1

2

1.Connect the three-prong plug into the machine.

2.Connect the electrical supply plug into a wall outlet.

•When leaving the machine unattended, the main power switch of the machine should be switched off or the plug must be removed from the socket outlet.

2

The main power/sewing light switch turns the main power and sewing light on or off.

1Turn on

2 Turn off

•When servicing the machine, removing covers or changing bulbs, the machine must be unplugged.

Page 2 Page 4
Image 3
Page 2 Page 4
Contents XL5050uscover Important Safety Instructions For Users in the UK, EIRE, Malta and Cyprus only Connecting Plugs and Main POWER/SEWING Light SwitchContents Principal Parts Bobbin-winding assemblyAccessories Connecting Plugs Using Your Sewing MachineMain Power/Sewing Light Switch Foot ControllerInserting the Needle Changing the Presser Foot Checking the NeedleSteadying the Machine Converting to Free-arm StylePattern Selection Dial ControlsWidth Recommended Widths and Lengths for StitchesStitches 1-Step Automatic Buttonhole Recommended PatternXL5000us.book Page 12 Tuesday, November 11, 2003 925 AM Step Buttonhole Reverse Sewing Lever Adjusting the stretch stitchingStitch Length Dial Stretch StitchingWinding the Bobbin Threading the MachineBobbin case latch Bobbin case finger Lower Threading2A-3 3Pass the thread through guides Upper Threading6Bring the thread down and pass it behind the thread guide Bobbin case Shuttle Drawing up the lower thread Sewing with a Twin NeedleAttaching the Extra Spool Pin Tension of the Thread Correct tension Denim Chart of Sewing FABRICS, Needles and Thread CombinationsFabric Type Thread Size of Needle SizePlease Read Before Sewing Straight StitchingStitch Name Zigzag Stitching StitchZigzag Stitch Blind Hem Stitching Shell Tuck StitchingSew at a slow speed Elastic Stitching Scallop StitchingStitch Stitch Name Feather Stitching Overedge StitchingDecorative Stitching Triple Zigzag Stretch StitchingStitch Length Making a Buttonhole Step ButtonholeStep Step Front bar tackStep Back bar tack Sewing Buttons Adjusting ButtonholesPlace the darning plate on the needle plate Foot16-1/8 Pull the lower threads to gather the material GatheringDarning Center needle position1Bastelocation.the cutout to the fabric at the desired AppliquésMonogramming Embroidering Stitch WidthKeep fingers away from moving parts, especially needles 4Replace the sewing light bulb MaintenanceChanging the Light Bulb OilingCleaning Upper Thread Lower Thread Skipped Loop in Seam Fabric Performance ChecklistFabric does Needle Machine is Machine does Not Feed Breaks Repacking the Machine Numerics IndexStraight Stitch

XL-5070, XL-5061, XL-5060, XL-5071, XL5050 specifications

The Brother XL series of sewing machines, including models XL-5051, XL-5050, XL-5071, XL-5060, and XL-5061, are crafted for both novice and experienced sewists seeking versatility and user-friendly features. These models are well-regarded for their reliability, ease of use, and a range of functionalities that cater to various sewing projects.

One of the standout features across these models is the array of built-in stitches. Each model typically boasts around 50 unique stitch options, including utility stitches, decorative patterns, and quilting stitches. This diverse selection allows users to tackle a plethora of sewing tasks, from making garments to crafting home décor items.

The Brother XL machines are equipped with an automatic needle threader, which simplifies the process of threading the needle, saving time and reducing frustration. This is particularly beneficial for beginners who may find manual threading challenging. Additionally, the machines offer a free arm option, which makes it easy to sew cuffs, collars, and other hard-to-reach areas.

Another significant technology found in the XL series is the adjustable stitch width and length settings. This feature gives users creative control over their projects, allowing them to customize stitches for different fabrics and styles. The machines also accommodate various fabric types, from lightweight cotton to heavier denim, making them highly versatile.

In terms of design, the Brother XL models are user-friendly, featuring straightforward dials and controls that simplify the sewing process. The LED lights illuminate the sewing area, ensuring that users can see their work clearly, even in low-light conditions.

Sewing speed is another key characteristic of these machines. They typically operate at a considerable speed, allowing for efficient completion of projects. Coupled with a sturdy build quality, the Brother XL series provides a smooth sewing experience.

Finally, these machines include convenient accessories such as multiple presser feet, a seam ripper, and a user manual, enhancing their overall value. With their combination of technology, features, and ease of use, the Brother XL-5051, XL-5050, XL-5071, XL-5060, and XL-5061 are excellent choices for anyone looking to explore the world of sewing while enjoying reliable performance.
Top Page Image Contents