Kenmore 625.38556 owner manual HOW to CUT and Connect the Tubes

Page 14

HOW TO CUT AND CONNECT THE TUBES

Your Reverse Osmosis Water System includes push-in fittings for quick tubing connection. Review the follow- ing instructions before connecting the tubes in the next step.

Cut tubes to length

1.Use a sharp cutter or knife to cut the end of tubing. Always cut the tubing square. See Figure 16.

2.inspect the end (about 1") of the tubing to be sure there are no nicks, scratches or other rough spots, if needed, cut the tubing again. See Figure 16.

NOTE: Tubing lengths should allow for the removal of the assembly from the hanger washers for servicing, if tubing lengths are shortened for heater appearance, it

may be necessary to keep the assembly on the hanger washers for service.

Connect tubes

1.Push tubing through collet, until it engages the o-ring. See Figure 17. Continue pushing until the tube bot- toms out against the back of the fitting. See Figure 18. A common mistake is to stop pushing when the tube engages the o-ring. This will lead to future leaks.

When a 1/4" tube is fully engaged, 11/16" of the tube has entered the fitting. When a 3/8" tube is fully engaged, 3/4" of the tube has entered the fitting. See Figures 17 & 18.

2.if using tubing other than tubing supplied with the system, be sure it is of high quality, exact size and roundness with a smooth surface.

Disconnect Tubes

1.Push the collet inward with a finger tip. See Figure 20.

2.Continue holding collet inward while pulling the tub- ing out. See Figure 20.

Fitting

O-Ring Seal

Collet

Collet and O-Ring

Figure 20

Push In Fitting_

TubeN,4K

Cut tubing square with end of tubing round, smooth, with no cuts, nicks or flat spots.

Tube Correctly Cut

Figure 16

Tube Partially Engaged With Fitting

Figure 17

O-Ring

Tube Fully Engaged With Fitting

Figure 18

Collet (Depress to

Remove Tubing)

Disconnect Tubing

Figure 19

Questions? Call The Kenmore Water Line 1-800-426-9345or visit KenmoreWater.com

14

Image 14
Contents System ONE Year Full Warranty on Reverse Osmosis System Osmosis Inspect Shipment Remote Location Plan Your InstallationUnder the Sink Location Check Space RequirementsTypical Under Sink Installation Prepare Site for Installation OverviewChoose Type of Water Fitting to Install Install Saddle ValveUnder The Sink Installation IntroductionRemote Location Install Reverse Osmosis Filter Install Storage TankInstall Reverse Osmosis Faucet Select Location of Reverse Osmosis Faucet Mounting HoleInstall Battery Faucet ElectronicsHOW to CUT and Connect the Tubes Connect Blue Tube to Reverse Osmosis Assembly Connect RED Tube to Reverse Osmosis FaucetSanitize the System Pressure Test the System Purging the SystemHOW Your Reverse Osmosis System Works Membrane PREFILTER/POSTFILTER Cartridge Replacement PREFILTER/POSTFILTER MaintenanceRO Membrane Cartridge Maintenance Change Battery Change Collet and O-RINGTDS Page Cause Postfitterexpended Iiiii!!!i!iii!i i!i Iii!i!iii!i 14 Jr Description Iiiiiiiiiiiiiiiiiiii
Related manuals
Manual 28 pages 59.56 Kb Manual 28 pages 57.61 Kb Manual 28 pages 16.63 Kb

625.38556 specifications

The Kenmore 625.38556 is a highly efficient and versatile air purifier designed to enhance indoor air quality. With its modern design and well-thought-out features, this model is ideal for those looking to combat allergens, dust, odors, and other airborne irritants in their living spaces.

One of the standout features of the Kenmore 625.38556 is its advanced filtration system, which includes a True HEPA filter. This type of filter is capable of capturing 99.97% of particles as small as 0.3 microns, making it highly effective against pollen, mold spores, pet dander, and smoke. The air purifier also features a pre-filter that captures larger particles, prolonging the life of the HEPA filter and ensuring optimal performance.

To further enhance its functionality, the Kenmore 625.38556 is equipped with an activated carbon filter. This filter effectively absorbs odors, including those from pets, cooking, and smoke, ensuring that the air remains fresh and clean. Combined with the HEPA filtration system, this air purifier excels in creating a healthier indoor environment.

In terms of user convenience, the Kenmore 625.38556 boasts a range of operating modes. It comes with multiple fan speeds, allowing users to customize airflow based on their current needs. The quiet operation is a significant advantage, making it suitable for use in bedrooms, nurseries, or offices without causing disturbances.

Additionally, the air purifier features a built-in air quality indicator, which changes color based on the detected air quality. This real-time feedback allows users to easily ascertain when the air in their space is clean or in need of purification.

Another thoughtful characteristic is its filter replacement indicator, which alerts users when it’s time to change the filters. This ensures that the air purifier maintains its high performance over time without unexpected lapses in filtration efficacy.

With its stylish design and compact size, the Kenmore 625.38556 can fit seamlessly into any room decor, making it a practical and attractive addition to a home. Whether you are dealing with common allergens or simply want to improve your indoor air quality, the Kenmore 625.38556 is a reliable choice that combines efficiency, technology, and aesthetics into one exceptional product.