Problem Cause Correction, No soft water

SECTION 3

CARE OF YOUR SOFTENER

3D.HELPFUL HINTS CHECKLIST

... TO HELP YOU SAVE MONEY

If your water softener fails to work, make the following easy checks. Often, you will find whats wrong yourself and you wont have to call and wait for service. If, after making the checks, your softener still does not work right, call your Sears Service Department, or call toll free, number 1-800-426-9345 for telephone assistance.

NOTE:

1.Also read ERROR CODE, page 10.

2.If an error code is not dispIayed, press and hold the SELECT button until (example: 000- -) shows in the display. Then, press SELECT again and hold until an SR code appears. It must show SR 17. If any other SR number shows, the softener computer is working on incorrect input and this would probably be the cause of

the problem. To set SR 17, press either the UP or DOWN button. Then, press SELECT to return a flashing 12:00 AM display, and reset the timer on page 6.

PROBLEM	CAUSE	CORRECTION
No soft water	Faucet or fixture may be plumbed to	From the outlet of the water softener, trace the water flow
	hard water	paths in your house pipes. If soft water is not directed to
		a faucet or fixture where it is wanted, consult a plumber.
		To conserve salt, the installer may have isolated some
		fixtures (outside faucets, toilets, etc.) from soft water.

	No salt (or salt bridged) in the storage	Refill with salt, or break the salt bridge (page 14). Press
	tank	ON/OFF-HOLD (RECHARGE NOW) button and hold for
		3 seconds to start a regeneration (see page 10).

	Transfomer unplugged at the wall	Check for loss of power due to any of these and correct.
	outlet, or power cable leads loose, fuse	With the power back on, look at the time display and read
	blown, circuit breaker popped, or circuit	PROGRAM MEMORY, page 10.
	switched off.
	Manual bypass valve(s) in bypass	Look at FIG. 12 on page 18. Move the stem in a single
	position	valve to service. In a 3-valve bypass, open the inlet and
		outlet valves, and be sure to fully close the bypass valve.

	Dirty, plugged or damaged nozzle &	Take apart and clean or replace damaged parts (see page
	venturi	15).
	Valve drain hose plugged	The drain hose must not have kinks, sharp bends, or be
		raised too high above the softener (see page 16 in your
		installation manual).

Water hard	Hardness number setting too low	Press and release the SELECT button until HARDNESS
sometimes		shows in the display. Read the hardness number in the
		display and be sure the same grains per gallon number is
		shown on your water analysis report. See page 7 to reset.
		Press and release the SELECT button until the present
		time shows in the display.

	Using hot water when softener is	Avoid using hot water during this time because the water
	regenerating	heater refills with hard water (see Automatic Bypass, page
		13).

	Increase in the grains of hardness in	Ask your Sears retail or catalog store for a new water
	your water supply	analysis. Then make a new hardness number setting
		(page 7).

625.348420 specifications

The Kenmore 625.348420 is a well-regarded air cleaner designed to enhance indoor air quality in various living spaces. This versatile air purifier embodies several advanced features and technologies, making it an excellent choice for those seeking to reduce allergens, dust, and other pollutants in their home environment.

One of the standout features of the Kenmore 625.348420 is its multi-stage filtration system. This includes a HEPA (High-Efficiency Particulate Air) filter that is designed to capture 99.97% of dust, pollen, pet dander, and other tiny particles as small as 0.3 microns. This makes it especially beneficial for allergy sufferers and individuals with respiratory issues. Additionally, the unit features a pre-filter that helps to prolong the life of the HEPA filter by capturing larger particles, which ultimately contributes to its efficiency.

The air cleaner is also equipped with a carbon filter, which works to neutralize odors from cooking, pets, and smoke. This is particularly important for maintaining a fresh indoor atmosphere, especially in homes with pets or in apartments where cooking smells can linger. The combination of these filters makes the Kenmore 625.348420 particularly effective in providing a comprehensive air purification solution.

In terms of operation, the Kenmore 625.348420 boasts user-friendly controls, typically including multiple fan speeds to customize airflow according to room size or air quality conditions. Many models come with a timer function, allowing users to set the purifier to operate at specific intervals, thus saving energy when not needed.

Another key characteristic of this air purifier is its quiet operation. It is designed to function silently, making it suitable for bedrooms and nurseries without disrupting sleep.

Portability is another advantage of the Kenmore 625.348420, as it is generally lightweight and compact, allowing users to move it easily from room to room as needed. Some models may also have built-in handles for added convenience.

Overall, the Kenmore 625.348420 stands out in the market of air purifiers with its effective multi-stage filtration system, user-friendly design, and quiet operation. This makes it an excellent investment for anyone looking to improve their home's air quality while maintaining a comfortable and clean living environment.

SECTION 3

PROBLEM

CAUSE

CORRECTION

No soft water

sometimes

625.348420 specifications