Choose Type of Water Fitting to Install

CHOOSE TYPE OF WATER FITTING TO INSTALL

Locate the cold water line in the sink cabinet. It is recom- mended, but not required, that the cold water line be soft water. You can use the saddle valve provided with your unit to tap into the cold water line. See Fig. 5. Or you can purchase standard pipe fittings locally such as a com- pression fitting. The fitting must provide a leak-tight connection to the Reverse Osmosis 1/4" tube.

NOTE: Local code may dictate which type of water fit- ting is used. Consult a plumber if you are not familiar with local codes or plumbing procedures.

NOTE: Codes in the state of Massachusetts require

installation by a licensed plumber and do not permit the use of saddle valves.

If you live in the state of Massachusetts, review plumb-

ing code 248-CMR of the Commonwealth of

Massachusetts before proceeding with the installation.

INSTALL SADDLE VALVE

(Included with your package)

6.Do not connect the tubing to the fitting at this time. This will occur later in the installation.

NOTE: Once the saddle valve is installed, the nut near

the handle may need to be tightened to prevent possi- ble leaks.

This fitting will be installed on the cold water pipe. The fitting must provide a leak-tight connection to the Reverse Osmosis 1/4" tubing.

Complete the following steps to install the saddle valve assembly.

. Review Fig. 5 and familiarize yourself with all parts of the saddle valve. This valve will self-tap a hole in cop- per tubing or plastic pipe.

IMPORTANT'. Before starting, close the hot and cold water shutoff valves (See Figure 5).

2.if installing on iron pipe, drill a 1/8" hole for the pierc- ing pin.

IMPORTANT'. if a battery-powered hand drill is not available and an electric drill is used, ensure that the

drill is properly grounded.

Hot Water	Cold Water
Shutoff Valve	Shutoff Valve

Pre-Drill

1/8" Hole

',IronPipe)

Seal

Valve

Nut - tighten if necessary

. Place the seal on the inside of Clamp X. See Fig. 5. Turn the valve handle all the way out.(counter-clock- wise) Be sure the piercing pin does not stick out beyond the seal.

4. Place Clamp X and Z around the pipe. Secure in place

with two screws. Tighten both screws evenly. Do not

Clamp Z

(Plastic)

Insert

Handle

over tighten screws. See Fig. 5.

5. Turn the valve handle all the way in. (clockwise) This

will pierce the wall of the pipe. See Fig. 5.

Nut	Use to Connect

Tubing

Saddle Valve Connection

(Included in package)

Figure 5

Questions? Call The Kenmore Water Line 1-800-426-9345 or visit KenmoreWater.com

625.38556 specifications

The Kenmore 625.38556 is a highly efficient and versatile air purifier designed to enhance indoor air quality. With its modern design and well-thought-out features, this model is ideal for those looking to combat allergens, dust, odors, and other airborne irritants in their living spaces.

One of the standout features of the Kenmore 625.38556 is its advanced filtration system, which includes a True HEPA filter. This type of filter is capable of capturing 99.97% of particles as small as 0.3 microns, making it highly effective against pollen, mold spores, pet dander, and smoke. The air purifier also features a pre-filter that captures larger particles, prolonging the life of the HEPA filter and ensuring optimal performance.

To further enhance its functionality, the Kenmore 625.38556 is equipped with an activated carbon filter. This filter effectively absorbs odors, including those from pets, cooking, and smoke, ensuring that the air remains fresh and clean. Combined with the HEPA filtration system, this air purifier excels in creating a healthier indoor environment.

In terms of user convenience, the Kenmore 625.38556 boasts a range of operating modes. It comes with multiple fan speeds, allowing users to customize airflow based on their current needs. The quiet operation is a significant advantage, making it suitable for use in bedrooms, nurseries, or offices without causing disturbances.

Additionally, the air purifier features a built-in air quality indicator, which changes color based on the detected air quality. This real-time feedback allows users to easily ascertain when the air in their space is clean or in need of purification.

Another thoughtful characteristic is its filter replacement indicator, which alerts users when it’s time to change the filters. This ensures that the air purifier maintains its high performance over time without unexpected lapses in filtration efficacy.

With its stylish design and compact size, the Kenmore 625.38556 can fit seamlessly into any room decor, making it a practical and attractive addition to a home. Whether you are dealing with common allergens or simply want to improve your indoor air quality, the Kenmore 625.38556 is a reliable choice that combines efficiency, technology, and aesthetics into one exceptional product.