PREPARATIONS
▶Please check before use
Connect it to voltage rating that matches it on the rating plate.
Then, open the feed valve to supply water to the filtration system.
OPERATION PART /INDICATION PART
▶Operation Part/Indication Part
1 | Hot water | 2 | Cold water |
| Hot water mode selection button |
| Temperature Indicator |
|
|
| |
|
| Temperature Indicator | 5 | ||
| ▶ |
| ▶ |
| ▶ |
How to Use
Preparations
/
■When the lamp on the indication parts are turned out
When the lamp on the indication parts are turned out please check the reason for break of electric supply in case of electricity failure or other conditions.
■After installation
Use after throwing away the water in the water tank up to full level more than twice.
■In case of no service for a long time
| ▶ |
| ▶ |
| ▶ |
3 | Hot water mode lamp | 4 | Cold water mode lamp | 6 | Cold water mode selection button |
Operation Part/Indication Part
■Regular filter change
The regular filter change is very important to have clean water. The filter after life is ended may degrade the performance. Thus, do not miss the time for the filter change.
In case of no service for a long time, completely drain the water from the tank. Next, fill and empty water again. And use the product.
1Hot water Temperature Indicator
According to the water temperature of hot water, the indicator are turned on. The more lamp on the indicators, the more hot water.
2Cold water Temperature Indicator
According to the water temperature of cold water, the indicator are turned on.
The more lamp on the indicators, the more cold water.
3 | Hot water mode lamp |
| 4 | Cold water mode lamp |
| When selecting hot water |
|
| When selecting cold water |
| mode, the indicator lamps on. |
|
| mode, the indicator lamps on. |
When not using for a long time please lock the main water supply valve and plug out the power cord.
16 | 17 |
|
|