Coway CHP-03AU, CHP-03AL, CHP-03AR warranty Arsenic Facts

Page 32

• For parts and service availability, please contact your local dealer or Coway.

This system is acceptable for treatment of influent concentrations of no more than 27 mg/L nitrate and 3 mg/L nitrite in combination measured as N and is certified for nitrate/nitrite reduction only for water supplies with a

pressure of 2.8 kgf/cm2 (40 psi) or greater.

• A nitrate/nitrite sampling kit should be used to monitor the nitrate/nitrite levels in your product drinking water at least every six months. Kits maybe purchased from your local dealer or Coway.

• This system has been tested for the treatment of water containing pentavalent arsenic (also know as As(V), As(+5), or arsenate) at concentrations of 0.050 mg/L or less. This system reduces pentavalent arsenic, but may not remove other forms of arsenic. This system is to be used on water supplies containing a detectable free chlorine residual at the system inlet or on water supplies that have been demonstrated to contain only pentavalent arsenic. Treatment with chloramines (combined chlorine) is not sufficient to ensure complete conversion of trivalent arsenic to pentavalent arsenic. Please see the Arsenic Facts section of this Performance Data Sheet for further information.

Efficiency rating means the percentage of the influent water to the system that is available to the user as reverse osmosis treated water under operating conditions that approximate typical daily usage.

The product water should be tested every 6 months to ensure that the contaminants are being reduced effectively. Please contact your local dealer or Coway to initiate this service.

This reverse osmosis system contains a replaceable treatment components, critical for the effective reduction of total dissolved solids and that product water shall be tested periodically to verify that the system is performing properly. Replacement of reverse osmosis component should be with one of identical specifications, as defined by the manufacturer, to assure the same efficiency and contaminant reduction performance.

The estimated replacement time of filter, which is a consumable part, is not an indication of quality guarantee period, but it means the ideal time of filter replacement. Accordingly, the estimated time of filter replacement may be shortened in case it is used in an area of poor water quality.

Model of Filter

Type

Usable period (months)

COST US $

WJNF11

NEO SENSE FILTER

6

44.00

WJMF11-50

RO MEMBRANE FILTER

24

140.00

 

 

 

 

WJIF11

INNO SENSE FILTER

18

31.00

/ WJCF11-POST

/ POST-CARBON FILTER

 

 

WJFF7

FINE FILTER

18

26.00

 

 

 

 

WJCC-02

CERAMIC FILTER

12

11.00

 

 

 

 

ARSENIC FACTS

Arsenic (abbreviated As) is found naturally in some well water. Arsenic in water has no color, taste or odor. It must be measured by a lab test. Public water utilities must have their water tested for arsenic. You can get the results from your water utility. If you have your own well, you can have the water tested. The local health department or the state environmental health agency can provide a list of certified labs. The cost is typically $15 to $30. Information about arsenic in water can be found on the Internet at the US Environmental Protection Agency website:

www.epa.gov/safewater/arsenic.html

There are two forms of arsenic: pentavalent arsenic (also called As(V), As(+5), and arsenate) and trivalent arsenic (also called As(III), As(+3), and arsenite). In well water, arsenic may be pentavalent, trivalent, or a combination of both. Special sampling procedures are needed for a lab to determine what type and how much of each type of arsenic is in the water. Check with the labs in your area to see if they can provide this type of service.

Reverse osmosis (RO) water treatment systems do not remove trivalent arsenic from water very well. RO systems are very effective at removing pentavalent arsenic. A free chlorine residual will rapidly convert trivalent arsenic to pentavalent arsenic. Other water treatment chemicals such as ozone and potassium permanganate will also change trivalent arsenic to pentavalent arsenic. A combined chlorine residual (also called chloramine) may not convert all the trivalent arsenic. If you get your water from a public water utility, contact the utility to find out if free chlorine or combined chlorine is used in the water system.

The CHP-03AR system is designed to remove pentavalent arsenic. It will not convert trivalent arsenic to pentavalent arsenic. The system was tested in a lab. Under those conditions, the system reduced 0.050 mg/L pentavalent arsenic to 0.010 mg/L (ppm) (the USEPA standard for drinking water) or less. The performance of the system may be different at your installation. Have the treated water tested for arsenic to check if the system is working properly.

31The RO component of the CHP-03AR system must be replaced every 24 months to ensure the system will

Image 32
Contents Water Filtration Device CHP-03AR/L/U Features Contents Dear CustomersSafety information Electricity safetyInstallation safety Installation safetyFor RInformationMATION Safety Info Electricity safety Operation safety Buck or the foreign body can be enteredOthers RInformationMATION Safety InfoOperating safety Others Front RearFor R RFILTInformation RPA TS Name / Wate Process Ation Water Filtration Process5-step water filtering system CHP-03AR/L 6-step water filtering system CHP-03AR/L POST-CARBON Filter5-step water filtering system CHP-03AU For RInformation Rfilt Wate Process AtionNEO-SENSE POST-CARBON For Ecapr RInformation Rfilt Wate Process / Installation Connect the faucet with the adaptorPlease check before use Water level indicator Sleep mode indicatorOperation / Indication Part Indication part/Operation partSleep mode selection button Operation partLight sensor Cold water function selection buttonTo use the cold water function How Pto Use REP O ATION/INDICATIONRA TTo drink the hot water HOW to USETo drink the cold water To drink the room water Installation Follow the instruction for installation Water filtration device installation place  After installing the water filtration system Movement and installation Be cautiousCleaningmethod Storage tankMaintenance Cleaning Method Storage tank Cleaning Method GutterGutter separation method Gutter assembling method Filter replacement cycle  About filter replacement cycleMaintenance P R Rlacementeaning Method Gutter / Filte  FilterFilter Replacement Method Separate the front coverLACEMENTPMaintenanceR R Filtemethod Troubleshooting Symptom Check Measures to takeSpecification PECIFICATINOthersLESHOOTINGROUB / SWater Flow Diagram CHP-03AR CHP-03AL CHP-03AUBrand Mach General Operating InformationModel CHP-03AR Others Rflow Diagwte R Rfomancepdataam /SHEET RCH -03AArsenic Facts Certificate Number Others R Rfomancepdata Sheet RCH -03AWater Treatment Device Model CHP-03AL Others R Rfomancepdata Sheet CH -03AL Rated Service Capacity 229 gal Rated Service Flow 0..07 gpm Others R Rfomancepdata Sheet CH -03AU Model CHP-03AUVOC Surrogate Claims Influent challenge Chemical reductionOthersMANCERFORPDATA Sheet CH -03AU MemoWhat This Warranty Does Not Cover Others DR WA Anty CA Limitations on Implied Warranties001

CHP-03AL, CHP-03AU, CHP-03AR specifications

The Coway CHP-03 series, which includes the models CHP-03AL, CHP-03AU, and CHP-03AR, stands out in the realm of water purifiers with their cutting-edge technology and thoughtful design. These devices have garnered attention for their ability to deliver clean, safe drinking water while ensuring practicality and user-friendliness.

One of the primary features of the Coway CHP-03 series is its advanced filtration system. The models are equipped with a multi-stage filtration process that includes sediment filters, activated carbon filters, and a reverse osmosis membrane. This comprehensive system effectively eliminates impurities, contaminants, and unwanted odors, resulting in water that is not only safe but also refreshing and pleasant to drink.

Another notable aspect of the CHP-03 series is its sleek and elegant design. Featuring a modern aesthetic and compact size, these water purifiers can easily blend into any kitchen or office environment. The intuitive interface, including an easy-to-read LED display, allows users to operate the device with minimal effort. With touch-sensitive controls, adjusting settings or dispensing water becomes a seamless task.

The CHP-03 models are also designed with energy efficiency in mind. They utilize a power-saving mode that can automatically turn off the device when not in use, helping to reduce electricity consumption and keep operational costs low. Additionally, the models come with a hot and cold water feature, which provides the flexibility of enjoying water at the desired temperature instantly.

Durability and maintenance are crucial considerations for any appliance, and Coway does not disappoint in this regard. The internal components of the CHP-03 series are made from high-quality materials, ensuring longevity and reliability. Furthermore, the filters have a user-friendly replacement indicator that alerts users when it’s time to change them, ensuring optimal performance and water quality.

In conclusion, the Coway CHP-03AL, CHP-03AU, and CHP-03AR water purifiers represent an ideal combination of advanced filtration technology, elegant design, and user-friendly features. These devices not only ensure the delivery of clean drinking water but also enhance the overall convenience in everyday usage. Their efficiency, durability, and modern aesthetic make them an excellent choice for anyone seeking a reliable water purification solution in their home or office.