Installation Location
nTo assure proper operation and to avoid the potential for safety hazards, place the system components on a firm and level surface. When placing any of the system components on a shelf, be certain that the shelf and any mounting hardware can support the weight of the product.
nMake certain that proper space is provided both above and below the system components for ventilation. If this product will be installed in a cabinet or other enclosed area, make certain that there is sufficient air movement within the cabinet. Under some circumstances a fan may be required.
nDo not place the system components directly on a carpeted surface.
nAvoid installation in extremely hot or cold locations, or an area that is exposed to direct sunlight or heating equipment.
nAvoid moist or humid locations.
nDo not obstruct the ventilation slots on the top of the system components, or place objects directly over them.
nThe display surface of the screen is sensitive to pressure and scratching. Treat the display sur- face with care in order to avoid lasting damage.
nIf the screen is brought into its operating room from cold surroundings, condensation can occur. Wait until the device has reached room temperature and is absolutely dry before you put it into operation.
nThe screen will set itself automatically to a mains voltage in the range of 100 V to 240 V. Ensure that the local mains voltage does not exceed and is not less than this range.
nThe screen may be connected to an earthed mains outlet only.
nThe On-Off switch does not disconnect the set from the mains voltage. For complete discon- nection from the mains voltage you must pull out the mains plug.
nThe set must be disposed of as special waste in accordance with your local waste disposal regulations. The safety regulations that apply to luminous materials have to be taken into account for handling and disposal purposes.
nThe backlight of the LCD TV contains mercury. The safety regulations that apply to fluorescent tubes have to be taken into account for handling and disposal purposes.
nFor PC operation use a screen saver with moving pictures and activate the power management for your display to avoid screen ”burns” being caused by still pictures.
Cleaning
When the system components gets dirty, wipe it with the soft, dry cloth and the special ScreenClean liquid that is supplied with your Harman Kardon Digital Lounge product. NEVER use benzene, aerosol cleaners, thinner, alcohol or any other volatile cleaning agent. Do not use abrasive cleaners, as they may damage the finish of metal parts. Avoid spraying insecticide near the system components.
Moving the Unit
Before moving the system components, be cer- tain to disconnect any interconnection cords with other components, and make certain that you disconnect the components from the AC outlet.
Unpacking
Before unpacking the screen, please take the protective white gloves from the accessory tool box. These gloves allow you to unpack the screen without damaging the screen and its high gloss finish.
The carton and shipping materials used to pro- tect your new DVD player/receiver, TV and loud- speakers during shipment were specially designed to cushion it from shock and vibration. We suggest that you save the carton and packing materials for use in shipping if you move, or should the components ever need repair.
To minimize the size of the carton in storage, you may wish to flatten it. This is done by carefully slitting the tape seams on the bottom and col- lapsing the carton. Other cardboard inserts may be stored in the same manner. Packing materials that cannot be collapsed should be saved along with the carton in a plastic bag.
If you do not wish to save the packaging materi- als, please note that the carton and other sec- tions of the shipping protection are recyclable. Please respect the environment and discard those materials at a local recycling center.
Copyright
Audio-visual material may consist of copyright works which must not be recorded without the permission of the owner of the copyright.
Please refer to relevant laws covering copyright protection.
Copy protection
This DVD player supports Macrovision copy pro- tection. On DVD discs that include a copy protec- tion code, if the contents of the DVD disc are copied using a VCR, the copy protection code pre- vents the videotape copy from playing normally.
For Optimum Performance
The controller is a precision device that is con- structed using extremely accurate technology. Soiling or friction affecting the pickup lens or disc drive can impair the image quality. In the worst case, neither video nor audio will be played back. To obtain optimum picture quality, the player should be checked (cleaning and replacement of some parts) every 1,000 hours. Note that this peri- od varies depending on the environment (temper- ature, humidity, dust) in which the player is used.
Do not attempt to clean the pickup lens yourself.
