Erasing an entire CD-RW disc

In Auto mode, when the CDR 26 does not receive track information from the source, it will automatically increase the track number after three seconds of silence, and it will stop the recording after five seconds of silence. Depending on the amount of time between the tracks on the original recording, this may result in empty tracks. To avoid this, press the Auto/Manual button on the remote to place the CDR 26 in Manual mode.

Step 6: Press the Play/Select button on the Record deck side to start recording, and start the source playback. If you are using Auto track increment mode, try to coordinate the playback to avoid three seconds of silence in the recording, in order to avoid an empty track.

Step 7: When the program material begins playing, the recording-level meters on the CDR 26 will display the relative loudness of the input, using blue and red dashes. However, in digital recording mode, this display is informational only, and using the level-control knob will have no effect whatsoever.

Step 8: If you are using manual track increment mode, remember to press the track increment button each time you wish the CDR 26 to increase the track number. Note that the CDR 26 will NOT stop automatically after ten seconds of silence in this mode (as it will in Auto mode). You must press the Stop button to end the recording session.

Step 9: The CDR 26 will not record more than 99 tracks onto the same blank disc. When only four seconds remain on the record disc, the display will warn you that the recording is about to end by displaying a DISC FULL message.

Step 10: When the recording has ended, wait until the track and time information reappears in the display.

Step 11: Before you can play your newly recorded disc in another CD player you MUST finalize it to complete the recording process. First press the Finalize Button. The Record Indicator will light and FINALIZE will flash in the Information Display. Within eight seconds press the Play/Select Button. A TOC WRITE N:NN message will appear. The N:NN part of the message is a countdown clock that shows the time remaining in the finalization process. When the display counts down to 0:00 and the Record Indicator goes out, the Information Display will return to its normal indications and the finalization process is complete. The disc is now ready to be played in any compatible CD or DVD player.

Step 1: Only CD-RW discs can be erased; CD-R discs can never be erased, even if the disc has not been finalized.

Step 2: Press the Erase Button once or twice until you see DISC ERASE flashing in the Information Display. The Record Indicator will also light.

Step 3: Press the Play/Select Button. The DISC ERASE message will stop flashing and it will be followed by a three-digit time indication (e.g., 1:11). The time indication message is a countdown clock that shows the time remaining in the erasure process.

Step 4: When the display counts down to 0:00 and the Record Indicator goes out, the Information Display will return to its normal indications and the erasure process is complete. The disc is now totally erased and may be reused.

Erasing one or more tracks on a CD-RW disc

Step 1: Only CD-RW discs can be erased; CD-R discs can never be erased, even if the disc has not been finalized. You can erase either the entire CD-RW disc (see above), or one or more tracks from the end of the disc, going in backwards order. This means that if you have recorded five tracks and you want to erase Track 3, you must also erase Tracks 4 and 5 in order to remove Track 3.

Step 2: If the disc has NOT been finalized, skip to Step 3, below. If the disc HAS been finalized first press the Erase Button. The Record Indicator will light and UNFINALIZE will flash in the Information Display. Within eight seconds press the Play/ Select Button. A TOC Erase message will appear in the Information Display followed by a three-digit time indication (e.g., 1:11). The time indication part of the message is a countdown clock that shows how much time remains in the unfinalization process. When the display counts down to 0:00 and the Record Indicator goes out, proceed to Step 3.

Step 3: Press the Erase Button. The Record Indicator will light and 01 TR ERASE will flash in the Information Display. Each press of the Next button will increase the number of tracks to be erased.

Step 4: Within eight seconds press the Play/Select Button. The 01 TR ERASE message will stop flashing and it will be followed by a three-digit time indication (e.g., 0:03). The time indication is the start of a countdown clock that shows how much time is remaining in the erasure process. When the display counts down to 0:00 and the Record Indicator goes out, the Information Display will return to its normal indications and the track or tracks have been erased.

For further information on using your Harman Kardon CDR 26, please refer to your owner’s manual, or see your dealer for assistance.

Visit the Harman Kardon Web site at www.harmankardon.com.

Harman Kardon and Power for the Digital Revolution are registered trademarks of Harman International Industries, Incorporated.

250 Crossways Park Drive, Woodbury, NY 11797 • 800.422.8027 • Fax: 516.682.3523 • www.harmankardon.com • Part No.: 3840R-Q017A

A Harman International Company

CDR 26 – How to Make Recordings 4

CDR 26 specifications

The Harman-Kardon CDR 26 is a sophisticated CD recorder that combines high-quality audio playback with recording capabilities, catering to audiophiles and casual listeners alike. Renowned for its sleek design and user-friendly interface, the CDR 26 has become a popular choice for those looking to preserve their favorite music from CDs or other sources onto writable CDs.

One of the standout features of the CDR 26 is its dual disc operation, allowing users to seamlessly switch between a CD playback source and a recording medium. This feature enhances the recording process, making it efficient and straightforward. The device supports various disc formats, including CD-R and CD-RW, giving users the flexibility to burn their music onto a variety of media.

The CDR 26 employs advanced recording technologies that ensure optimal audio fidelity. With a high-quality 24-bit/96kHz digital-to-analog converter, it provides rich sound reproduction that faithfully captures the nuances of the original recordings. Additionally, the device boasts a variety of recording modes, including on-the-fly recording, which allows users to create compilations without the need for a computer.

Another remarkable characteristic of the CDR 26 is its integrated digital signal processing (DSP) features. The built-in DSP allows for various editing functions, such as track splitting and adjusting levels, making it easier for users to create professional-quality recordings. The intuitive interface includes an LCD screen that displays pertinent information, including track numbers, remaining recording time, and more, making navigation clear and efficient.

Furthermore, the Harman-Kardon CDR 26 includes extensive connectivity options. With optical and coaxial digital inputs, as well as traditional analog inputs, users can connect it to a variety of audio sources, including turntables and tape decks. This versatility makes it an ideal component in a comprehensive audio system.

In summary, the Harman-Kardon CDR 26 is a feature-rich CD recorder that excels in both audio quality and usability. Its dual disc operation, advanced recording technologies, integrated DSP capabilities, and versatile connectivity options make it a valuable tool for anyone who wishes to curate and preserve their musical collections while enjoying high-fidelity sound. Whether for personal use or as part of a larger audio setup, the CDR 26 represents a reliable choice for all your CD recording needs.