GE Monogram ZGU375NS, ZGU375LS installation instructions Gas supply, Electrical supply

Page 6

Installation Preparation

Stainless Steel G a s Cooktop

Power supply locations

Gas supply:

These cooktops are shipped from the factory set for either natural gas or LP gas. Check to be sure you have the correct cooktop for the type of gas being used.

The pressure regulator must be connected in series with the manifold of the cooktop and must remain in series with the supply line regardless of type of gas being used.

The natural gas model is designed to operate at 5" water column pressure.

A regulator is required at the natural gas source to provide a maximum of 7" water pressure to the cooktop regulator.

The liquid propane model is designed to operate at 10" water column pressure.

A regulator is required at the LP source

to provide a maximum of 14" water pressure to the cooktop regulator.

For ease of installation, and if local codes permit, the gas supply line into the cooktop should be 1/2" or 3/4" ID flexible metal appliance connector, three to five feet long.

NOTE: Purchase new flexible line. DO NOT USE OLD, PREVIOUSLY USED FLEXIBLE LINE.

Make gas connection through rear wall, or on cabinet floor at rear, as illustrated.

Electrical supply:

This cooktop features pilotless electric ignition for energy savings and reliability.

It operates on a 120 volt, 60 Hz power supply. A separate circuit, protected by a 15 amp time delay fuse or circuit breaker, is required.

Optional Combination Installations

This cooktop may be installed in combina- tion with a ZVB36 Monogram Downdraft Vent, a ZET1038 Single Oven or a ZTD910 Warming Drawer.

The gas and electrical supply must be located where it will not interfere with vent housing, the oven or the warming drawer. See pages 9 through 11 for alternate installation requirements.

16"

7"

8"

42"

NOTE: Locate gas and electrical supply within shaded area. Locations shown for a 42" cabinet base, adjust when using other cabinet size.

A properly-grounded 3-prong receptacle should be located within reach of cooktop’s four foot power cord.

IMPORTANT: (Please read carefully). FOR PERSONAL SAFETY, THIS APPLIANCE MUST BE PROPERLY GROUNDED.

The power cord of this appliance is equipped with a three-prong (grounding) plug which mates with a standard three- prong grounding wall receptacle to mini- mize the possibility of electric shock hazard from this appliance.

• The customer should have the wall recep- tacle and circuit checked by a qualified electrician to make sure the receptacle is properly grounded and has correct polarity.

Where a standard two-prong wall receptacle is encountered, it is the personal responsibil- ity and obligation of the customer to have it replaced with a properly grounded three- prong wall receptacle.

Do Not, Under Any Circumstances, Cut Or Remove The Third (ground) Prong From The Power Cord.

Do not use an extension cord.

IMPORTANT: Improper grounding and improper polarity of the house wiring can cause continuous sparking of the ignition system. Be sure to check for correct grounding and polarity.

6

Image 6
Contents Installation Instructions Contents Advance planning Natural gas cooktop ZGU375LS LP gas cooktopAdvance planning installation options Tools Materials RequiredNew flexible line Optional Combination Installations Cut the OpeningGas supply Electrical supplyInstall Cooktop Install Pressure RegulatorConnect electrical Base Cabinet Requirements Power Supply Countertop RequirementsDuctwork Installation With Warming Drawer Installation With Single Oven Pub. No Dwg. No D4290P370

ZGU375LS, ZGU375NS specifications

The GE Monogram ZGU375LS and ZGU375NS are two exceptional built-in gas cooktops designed to elevate your culinary experience with innovative features and high-quality performance. Both models come with a sleek design that seamlessly integrates into any kitchen décor, providing a professional-grade cooking surface for home chefs and cooking enthusiasts.

One of the standout features of these cooktops is the powerful gas burner system. The ZGU375LS and ZGU375NS are equipped with five sealed burners that deliver precise heat control, ranging from a low simmer to an intense boil. The impressive output of up to 18,000 BTUs on the largest burner ensures that you can quickly bring pots to a boil, while the low-output burners are perfect for delicate sauces and simmering. This versatility allows for various cooking techniques, including sautéing, frying, and simmering, making these cooktops suitable for a wide range of recipes.

Safety is also a top priority in the design of the ZGU375LS and ZGU375NS. Both cooktops feature an innovative flame failure system, which automatically shuts off the gas supply if a flame goes out unexpectedly. This provides peace of mind for homeowners and ensures a safer cooking environment, particularly for families with children.

The cooktops are designed with a robust stainless-steel finish, offering not only a modern aesthetic but also durability and ease of cleaning. The continuous grates provide a stable cooking surface and allow for easy movement of pots and pans, enhancing the cooking process. Additionally, the grates are dishwasher safe, simplifying the maintenance procedure.

Another advanced technology featured in these models is the integrated backlit knobs, which enhance usability and style. These knobs illuminate when the burners are in use, offering clear visibility even in low-light conditions. This feature combines functionality with a sophisticated design, making the cooktops a striking focal point in the kitchen.

In summary, the GE Monogram ZGU375LS and ZGU375NS are built to meet the demands of modern cooking with their powerful burner system, safety features, elegant design, and user-friendly technologies. Whether you're a novice or an experienced chef, these cooktops provide the performance and reliability needed to elevate your cooking experience to new heights.